FX Dreamline GRS .177 looks like FX Crown GRS. FX AMP regulator swap for Huma-Air reg.

Подписаться 5 тыс.

Просмотров 2,8 тыс.

50% 1

For other interesting topics, go to my RU-vid channel.
www.youtube.com/@paavokaleva?...
In this video You can see how to change FX Dreamline tube version AMP regulator to Huma-Air regulator. The reason I did that was that FX AMP regulator was inconsistent. After changing the regulator I shot shot string and results were good.
After that I wanted to try how would it look like if I change air tube to air bottle. IMHO the result was not bad in looks department. Performance wise there is room for improvement.
How I built that airgun You can watch from here:
Part 1 - • FX Dreamline .177 Tact...
Part 2 - • FX Dreamline .177 Tact...
Unboxing GRS rifle stock - • FX Dreamline .177 GRS ...
Unboxing and assembling CNC cut shooting table - • Unwrapping and assembl...
To see some shooting from that airgun, Check out this video:
• FX Dreamline GRS .177 ...
My other (Snowpeak/Artemis/SPA P35) airgun videos:
• Snowpeak P35 Artemis P...
• Snowpeak P35 shooting ...
• Snowpeak P35 hunting i...
Are You interested in motorbike repairs? Then check out these videos:
• Husqvarna 610 no spark...
• Husqvarna 610 I Husqva...
• EV repair Electric ATV...
Or You are more of a car guy/girl? There is something for You also:
• HOW TO FIX VOLVO XC90 ...
• HOW TO FIX VOLVO XC90 ...
• Husqvarna TE610E
• Airgun stuff
• Volvo XC90
• Agricultural
• Volvo XC70 and Volvo 745
Music: Tunetank
@ / twinsbeats

Хобби

Опубликовано:

19 сен 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 34

@paavokaleva 6 месяцев назад

Take a tour on my channel www.youtube.com/@paavokaleva?sub_confirmation=1

@mikebird8290 2 месяца назад

Just subbed my friend 🎯👍🏼

@paavokaleva 2 месяца назад

@@mikebird8290 Thank You!

@dgw07 7 месяцев назад

Im looking forward to seeing your dual Regulator set up

@dgw07 7 месяцев назад

I like he bottle version set up , it looks natural for the type of rifle , hopefully you will get the set up working better .

@paavokaleva 7 месяцев назад

Thanks! I have high hope about my new set up. At the moment the gun is dual regulated (like FX Maverick). And need to be tested. Currently editing new video how I did that dual reg. set up. Testing and results going to be separate video. ru-vid.com15OJRkRPdYk?feature=share

@Eralov 10 месяцев назад

the wood looks so awesome. looking forward to see the huma regulated bottle version

@paavokaleva 10 месяцев назад

It's beautiful how sunlight plays with the colors of laminated stock. For that Huma regulated bottle version I have new idea! For hint - more FX Maverick parts ;)

@michaelb.42112 7 месяцев назад

Found you on the forum, brother.

@paavokaleva 7 месяцев назад

Thanks for supporting!

@mikebird8290 2 месяца назад

SIR HAVE YOU SEEN GILES VIDEO FROM AIRGUN 101. HE DONE THE SAME BUT WITHOUT THE PLENUMS AND CUT DOWN THE STOCK. LOOKS COOL🎯👍🏼

@paavokaleva 2 месяца назад

Sir, I have seen it.

@mikebird8290 2 месяца назад

@@paavokaleva SIR THIS IS THE PART NUMBER FOR THE FX BOTTLE ADAPTER LONG FX20128. WHICH IS USED ON THE DREAMLINE POWER PUP BOTTLE. MAY HELP MY FRIEND 🎯✌🏼🤩

@FilipPhillips 9 месяцев назад

Hi, look at Altaros regulators its Czech made, like JSB. It goes partly like pipe in the carbon bottle. Sou you can have reg block "one" in the bottle at 150 bar, than fx reg and your plenums.

@raymondaguirre5825 10 месяцев назад

It looks really cool to bad it didn't perform as good as it looked.

@paavokaleva 10 месяцев назад

Luckily, performance can be proven by tuning it more or swapping FX regulator to Huma-Air regulator.

@MichiganAirgunner 2 месяца назад

How did u get the maverick power plenum to work.. I got one but the air stared leaking from the small on in the plenum

@paavokaleva 2 месяца назад

Do You mean Maverick second regulator tube? The plenum itself has no holes to leak from. It's just a plain tube with threaded ends. I had no leaks.

@MichiganAirgunner 2 месяца назад

@@paavokaleva I ordered the the power plenum from a fx maverick and it has a small hole for the atmospheric pressure. Even in the description of the part it says people are using them for the dreamline plenum..

@paavokaleva 2 месяца назад

@@MichiganAirgunner I looked at my Dreamline and found that little hole in the plenum. That hole is at the threaded part of the plenum. If air leaks out from it then O-ring between main block and plenum is not sealing good enough. O-ring mentioned is part number 16 on parts diagram --> fxairguns.com/wp-content/uploads/2022/01/F10057-3-ENG.pdf

@lesmo9627 6 месяцев назад

Is that maverick plenum u have fitted?

@paavokaleva 6 месяцев назад

Yes, Maverick 89cc plenum. Here You can see more Maverick parts mixed with Dreamline parts: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-LvQu-XnOco0.html

@carlvandermerwe9492 10 месяцев назад

More!!

@paavokaleva 10 месяцев назад

More will come!

@ptescreen18 6 месяцев назад

@@paavokalevaplease more

@paavokaleva 6 месяцев назад

@@ptescreen18 Soon! Videos are in editing.

@max88nielsen 8 месяцев назад

You have some plenums now. Do you have a link for the rail you placed under the stock .

@paavokaleva 8 месяцев назад

Plenty of plenums now 😄 That link does not work anymore, but type in amazon 7 slot picatinny rail and You get plenty of options. www.amazon.com/s?k=picatinny+rail+7+slots&crid=1UWVLA3Y609AS&sprefix=picatinny+rail+7+slot%2Caps%2C214&ref=nb_sb_noss_1

@max88nielsen 8 месяцев назад

Thanks. I just saw your other conversion videos. So now I know what to look for. Nice work 😊

@max88nielsen 8 месяцев назад

Just found a UIT to 5 slot picatiny at HUMA. Thanks again. Now I just need a stopper nut for the hammer spring regulator. So I don't need any lock rite.

@paavokaleva 8 месяцев назад

Just few days ago saw that someone used a drop of RTV silicone to "lock" that HS adjustment nut@@max88nielsen

@paavokaleva 8 месяцев назад

Thanks for watching 😉 @@max88nielsen