Thanks for this video! I tried for a long time to find out how to tie a frets on dombra, i only found a couple of incomprehensible pictures and videos in which it is impossible to understand what to do. I'm just making my own dombra and this will be the most valuable information for making it.
It seems that you are a great domra player :) I just bought a domra on Avito (Russian craighslists), tuned it D/G but for some reason my D strings seems to be very loose. I know that fishing line is commonly used on domras (Kazakhstan and Kolmykia), what diameter fishing line should I get so that my D string is not so loose? Do I need different strings gauges for each string or 2 identical strings or 1 single fishing line for both strings (I don't know how or what exactly to ask, so I hope you understand what I mean). And finally, the fishing line used for the frets is very thin and I have to press the strings almost on the edge of the fret otherwise it hums, should I refret the entire instrument? if so, what fishing line diameter do you recommend?
Hello, and thankyou ! It’s most common to use one piece of fishing line for both strings. I use 0.7mm fishing line. If you want tighter strings you could try something thicker like 0.8 or maybe 0.9, but in general I would say that a lot of the time the strings are fairly loose, compared to other instruments especially. I tune to A/D, so the strings aren’t very tight at all. As for the frets, there are a few factors that can affect the buzzing. The frets (diameter, as well as how well they are tied), and technique of the player, and the quality of the dombra it’s self (so the straightness of the neck and so on). Usually it’s the higher quality dombras that use thinner fishing line, and it’s wrapped around twice for each fret. Pressing the close to the fret is the right technique so I would advise to maybe keep practicing like that and see if it improves, but if you think that the amount of buzz is abnormal, maybe trying a different way of fretting is worth a try.
@@JHDombyra I forgot to mention, there's another less popular dombra, Holmykskaya dombra, a traditional instrument of a mongolic republic in Russia, usually triangular in shape (homemade/peasant variants) or similar to a pizza peel (with frets, academic dombra). I just thought this might interest it :)
Қазақстанда домбыраның көне тұрын, көне стилде, модернизацияға дейінгі ескі түрін жасайтын адам я жоқ, я болса да жасамайды. Құдайдың кереметін қараңыз, осы мен іздеген домбыраны Австралиялық жігіт Австралияда жасайды. Ғажайып оқиға емес пе бұл. Көпке үлгі. ✊️✊️✊️👍
Вот URL. Его также можно найти в описании к полному видео, которое есть на моем канале. drive.google.com/file/d/1EPveg7Fk2t0_8NFtkk70-2RWJ8-Or5Al/view?usp=sharing
Құдайдың кереметін қараңдар. Мен қазақ Қазақстанда таба алмадым бабаларымыз тартқан көне домбыраны жасайтын шеберлерді. Енді міне Австралиялық жігіттің жасаған көне домбырасын көріп таңғалып та таңырқап та отырмын. Ғажайып! Өзін қазақ санап, өзін шебер санап жүрген елдегі шеберлер үлгі алуы тиіп осы жігіттен. Жоғалғанды тауып, ұмытылғанда жаңғыртып жүрген, Австралиялық Жігітке көп рақмет! Көне домбыра іздеген бүкіл қазақтардың атынан алғыс айтамын! ❤
Usually no. Equal temperament is the standard. A few different keys are used in the music of the dombra, so a just intonation system won’t work as well. Older dombras (like the ones this build is inspired by) often omitted a few frets. Which frets were left out varied, but it was usually the 1st, 6th, 13th & 18th. Tuning system and scale use however was always pretty much as in western music though
The dimensions for this dombra are: Length: approx 870mm Neck length (including headstock): approx 535mm Body length: 335mm Fretboard length: 410mm Headstock length: 120mm Neck width: 24mm Neck height: 20mm Body width (at widest point): 110mm Body width (at base): 90mm Body height: 42mm Scale length (nut to bridge): 615mm I use pine, because it is the most easy to source wood in my area, and it works well.
Привет брат, Лучший совет - наберитесь терпения и не торопите процесс строительства. Потратьте достаточно времени, чтобы убедиться, что домбра качественная и на ней удобно играть. Измерьте ширину грифа домбры и сопоставьте его размеры, так как важно, чтобы гриф был достаточно тонким, чтобы на нем было легко играть. На моем канале вы можете найти плейлист «LUTHIERY», в котором собрано множество видео по изготовлению домбры, которые вы можете посмотреть и изучить. Я рад ответить на любые ваши вопросы
