Non vale niente, motore che gira , platorello fermo,rotto ingranaggio ,in piu difficolta a smontare platorello !!

I hope someone can help me. Does anyone experience grass clippings blow up through the grass collection bag filling indicator when it is open? I am also having trouble re-inserting the mulch kit. Does anyone have any suggestions? Thanks in advance!

Are you using Parkside brand batteries? Or will any brand work?

Rakás fos!!!!Alig dolgoztam vele és leégett…

Такая сейчас ко мне едет, б/у. Посмотрим. Привет с берегов Дуная!

Can I put water inside the container and then vacuum the dust around my house without paper bag? You know, wet vacuuming without actually vacuuming anything wet.

After a full recharge mine dropped in brightness after a couple of mins. After 1\2 hr the full brightness is gone & the remaining light is useless.

price?

I use the size 1 and 1/0 Mustad hooks to freeline for snook ru-vid.comUgkxzXmlErSqVAEGWFEKO530BvTqFDw53QW3 and they have been fantastic. The points are super sharp, and the hook is small enough to blend with my baitfish, yet large enough to land fish 30" or more. I also use these hooks when I'm pier or surf fishing with my kids. They tend to catch tons of smaller snapper, whiting, and catfish, and we get far fewer gut hooks with these Mustad in-lines, which means more of them survive after release. I was actually using these hooks when I caught my friend too, but I think that had more to do with the bait I was using ;-)

👍

PLA ?

which model is it?

I have this Shit. Don't buy. Very weak. It does not cut, but caresses the grass.

I've been searching for one of these for the last 18 months. Lidl's office tell me when they're coming on sale but not one ever turns up in our town. I've bought the batteries all ready for use, but no frigging mower!

How does PRMA 40-Li A2 differ from PRMA 40-Li A3 from PRMA 40-Li B2 from PRMA 40-Li C1?

hello i have a problem.. when i instal is flashing just first 2 leds not all 12 , but if i connect to the batery direct works full amd secvential .. why ??

nevie niekto prečo mi neide zmena farbi počas tlače v sliceri to ukazuje no program sa nepreruši :(

Great thanks

How much price

I want this how i buy

Can be used for car polishing?

With this PARKSIDE PAAS A2 model 2019, the spotlight is permanently lit and is not automatically dimmed after 1 minute. with the successor model 2020 PAAL 6000 B2, the light is dimmed after 1 minute. they did this to keep the promised lighting duration. Otherwise, when it is permanently lit 100%, it is already off after 2 hours. For me, it is important that it is permanently lit and does not automatically dim. The PAAS A2 model shines more strongly than the PAAL 6000 B2. Both have the same 18650 lithium cells. Both are cheap cells. if you install stronger cells, they will of course glow even longer.

this vaccum has a problem, a very high pitch sound that is very annoying

Žehlení je dobrá věc, ale vždycky je ale. Hodí se např. na plnou plochu , pokud budete tisknout otevřenou krabičku tak běžným nastavením prostě nebudete schopni vytisknout okraj (vždy se to dá vyladit, ale už to není takové jak ukazujete ve videu).

Dobrý den, Chtěl bych se zeptat jak vám dlouho bruska vydržela na broušení omítek? Mě umřela po cca hodině a půl. A to jsem 5 minut brousil a pak 5 minut odpočívala. Pravidelně jsem ji vyfoukával stlačeným vzduchem. Děkuji za info.

czy w tej kosiarce są koła łożyskowane

Merci for this great review!

the best thing it can charge your phone while working

This video would be a lot more helpful if you actually went over ironing parameters - flow rate, spacing, etc - instead of just... turning it on. My two cents.

hi, is it possible to use 1x 4ah and 1x 2ah or its better to use 2x2ah or 2x4ah ?

Come ti trovi ad usare quell'attrezzo parkside

kein wasser test schade

in my hand this tool fire- i must return it.

At 3'50", low speed when cutting steel. And press firmly the “foot” against the pipe, when cutting hard materials.

ovo si kupujem !

niceeee!! extreme makeover :)

Hello,what is the sound of turning a knife in time 2:13?

Vanno bene?

What is your nozzle and bed temp settings? Im having trouble with my prints sticking to the bed on my Ender 3 V2. My z offset should be okay

Can I polish tiles with this tool?

ok i have seen that PWBS 180 A1 have many issues of dead motors and i was agree to buy a PWBS 180 B3 ..... but before i saw your video ! Now it seems that this device cleraly have a conception problem ! Thanks !

Hi, my pwbs 180, is working slow. It seems that velocity controls doesn’t work. I have the feeling that the pwbs 180 is working at minimum power. Do you think it is this same issue you fix in this video?

stop buying these crapy tools...they fail on the gearbox..all of them...the rotary hammers,this sander...every tool from parkside fails on the gearbox....I only buy the PERFORMANCE SERIES from Parkside.....

Worth the money?

Can you please show me parts list to order some parts

Ey bi si di i ef ji

Em portugal é caro custa 69.99€

I didn't start to work with that item, but after i saw the dust inside, i sealed the green and black plastik parts with cheapest silicone 2€, also the strange square hole. The aluminium gearbox can be pushed out by hand, also sealed that around. I left excess silicone as it is, just to avoide to pull out the seal inbetween the parts. It dont have to be pretty but functional 😉 The silicone dont stick to the pakside plastic as an glue, removing by rubbing of is not a Problem

My blade arm broke inside. They replaced the whole saw. I kept the old one and will take it apart to use spare replacement parts in the future.

What was the price of it?