Тёмный
Fix Fitbits
Fix Fitbits
Fix Fitbits
Подписаться
Комментарии
@PeterPrestonUK
@PeterPrestonUK Месяц назад
Unfortunately the "tool breakdown" doesn't include the screwdriver size, which would've saved me a bit of hassle when I discovered it's not PH00.
@gs7089
@gs7089 Месяц назад
CAREFUL!!! A RISK OF BREAKING THE SCREEN!!! I did everything as shown in the video but the screen broke at the point of applying the pressure.
@kristipeed6824
@kristipeed6824 2 месяца назад
What is the silver foil thing you are using to pry under the screen?
@lollypop6897
@lollypop6897 2 месяца назад
How do you fix a lose little gold piece on the back of the charge fove
@samthurston5320
@samthurston5320 2 месяца назад
Does this stop the white flashing on the screen?
@ECCE6575
@ECCE6575 2 месяца назад
This unfortunately didn't work for me. Used a heat gun, heated the bleep out of it until it shut off from overheating and I was afraid I was going to melt the components, and was still unable to pry the screen off. YMMV.
@charnishi9095
@charnishi9095 3 месяца назад
How do you fix the Fitbit versa white screen. My watch screen fell off. It was never dropped or abused. It just loosened. Now the screen is white, I tried rebooting and letting the battery drain and recharging but still shows white screen.
@AustinDu-plan
@AustinDu-plan 4 месяца назад
Hi I bought a Fitbit charge 5 pebble but it is dead, I've tried resetting it, charging it but nothing. Do you think it is the battery? It's in perfect condition.
@FixScreens
@FixScreens 4 месяца назад
A power issue could either be the battery or the circuit board
@ElevatorWasher5000
@ElevatorWasher5000 4 месяца назад
NOT THE OVERHEATING WATCH
@niquenso2926
@niquenso2926 5 месяцев назад
What is the tool you used to get under the screen? The adhesive on mine will not melt or soften for the tool in the kit to get under it.
@fixfitbits4860
@fixfitbits4860 5 месяцев назад
you can find the tool by searching on ebay 'ULTRA THIN 0.1MM,STAINLESS STEEL PRYING TOOL'
@niquenso2926
@niquenso2926 5 месяцев назад
@@fixfitbits4860 Thank You
@jaygosch8705
@jaygosch8705 5 месяцев назад
The key to success getting the screen off is to have a very thin tool like he shows and to start with the fitbit face up and push the tool DOWN between the screen and the case. Once you get the tool in, you can start to pry up. I overlooked that at first and was trying to get in with the tool sideways. I couldn't get it to do anything except slip and scratch the screen. I didn't have the tool he used, so I used a razor blade. Also,if you use the tool correctly, you won't be tempted to heat the fitbit excessively. I had my small heat gun set at 250 F and heated for maybe 15 seconds before I got the tool in. I heated a little more as I worked my way around the edges. Hope this helps someone.
@NVanHiker
@NVanHiker 6 месяцев назад
My screen pops out all on its own! I came here looking for advice on how to glue it back in.
@fixfitbits4860
@fixfitbits4860 6 месяцев назад
Use an adhesive like the one in our video and let it set whilst clamped overnight
@mmzubairi
@mmzubairi 6 месяцев назад
i have a head versa 2. It doesn't come on. Is there a way to check if its a battery issue vs a bad screen?
@fixfitbits4860
@fixfitbits4860 6 месяцев назад
If it's just a faulty screen then when you put it on charge it should still vibrate. Then sensors on the back of the device should also still operate
@mmzubairi
@mmzubairi 6 месяцев назад
@@fixfitbits4860 it doesn't do that. When I first saved this issue, I charged it over night and it eventually came back to life but just for a maybe a few hours. Since then, it's just dead. I am assuming it's the battery. Do you know what is the battery used in versa 2?
@erumrauf
@erumrauf 6 месяцев назад
Hi my Fitbit charge 5 is sync, clock changing, battery is charging but touch screen is not responding. Any suggestion?
@Smart-WatchStraps
@Smart-WatchStraps 6 месяцев назад
That sounds like a screen replacement would do the job!
@fixfitbits4860
@fixfitbits4860 6 месяцев назад
@@Smart-WatchStraps Yep, replace the screen
@lisajayneadams9693
@lisajayneadams9693 6 месяцев назад
Thanks, really helpful 😊
@adamcox9846
@adamcox9846 8 месяцев назад
Perfect, easy to follow video, thank you. It cost me £15 for the replacement screen and £10 for a mini tool set that’ll last me forever. Already had some glue. There’s some finicky bits but even with my big hands I got it done.
@sethblalock5820
@sethblalock5820 9 месяцев назад
What kind of sdhesive are you using
@adhithiyanarayanan3602
@adhithiyanarayanan3602 10 месяцев назад
Where can i get it done in india?
@BenjaminWilger
@BenjaminWilger 10 месяцев назад
Worked flawlessly! Thank you!
@Parksandsoul
@Parksandsoul 10 месяцев назад
What bit is used for the screwdriver?
@lisachavez3538
@lisachavez3538 10 месяцев назад
I did this and I still can't get messages and calls on my watch 😢
@Jinxx2602
@Jinxx2602 3 месяца назад
Do you have your notifications on?
@EricPimpi
@EricPimpi 11 месяцев назад
Do you work Luxe? Seems like my screen is not working.
@thuyduongao8578
@thuyduongao8578 11 месяцев назад
Thanks for the video. Whats name of screw driver that you used?
@ZyroZoro
@ZyroZoro Год назад
The glue is B7000 glue.
@liauwyuriko
@liauwyuriko Год назад
any sugestion for logo stuck , pressing button 3x on charger doesnt work
@JEAN-EARL
@JEAN-EARL Год назад
Anyone recentlty seen this video ? How reliable is this fixing method ? Where can all these tools be bought ? And lastly, is the new screen as good as the old one and is the site legit ?
@JEAN-EARL
@JEAN-EARL Год назад
@fixfitbits4860
@1860wright
@1860wright Год назад
What glue did you use
@fixfitbits4860
@fixfitbits4860 Год назад
T-800
@electrolatif
@electrolatif Год назад
Hi thank you for the video Where i can buy PCB board for Fitbit versa 3?
@fixfitbits4860
@fixfitbits4860 5 месяцев назад
you can find one by searching on ebay 'Original Fitbit Versa 3 Main Power PCB Board Motherboard'
@electrolatif
@electrolatif Год назад
Hi thank you for the video Where i can buy PCB board for Fitbit versa 3?
@fixfitbits4860
@fixfitbits4860 Год назад
They're not widely available
@emcnichol9161
@emcnichol9161 Год назад
What kind of glue did you use?
@ZyroZoro
@ZyroZoro Год назад
B7000 glue
@felixlugo7256
@felixlugo7256 Год назад
what happen with other skiny cable? the screen that you installed is a different one.
@shamasfoodzone
@shamasfoodzone Год назад
Hi sir!! , My fitbit charge 5 is not turning on how can I get it fixed 😥
@xtranscaligirlx7946
@xtranscaligirlx7946 Год назад
I have a charge 3 fitbit with a black sreen it can't even pair because of sreen so I wounder how much would a place that can repair it cost with parts I see a sreen is like around 20$ for a fitbit
@stephanie_7038
@stephanie_7038 Год назад
Does it matter what kind of glue?
@fixfitbits4860
@fixfitbits4860 Год назад
Any waterproof glue. You can find the same t-800 glue that we used on Amazon
@roadrunner5772
@roadrunner5772 Год назад
your original Screen have NCF Kabel and your Replacement have this not !!!
@mauronat
@mauronat Год назад
Top 👍
@michaelcosson
@michaelcosson Год назад
I own a hot air rework tool similar to the one you show in your video. What temperature in degrees C do you use to melt the glue? Thank you!
@spiritlight4440
@spiritlight4440 Год назад
I used 188 degrees C and went around the watch face 60 times - LCD came off super easy.
@frankgarvey1552
@frankgarvey1552 Год назад
I have 10 Ionic watches. After registration, I was able to verify 5 of them to receive a refund. When I tried to claim on the sixth one an onscreen message stated that as I had claimed 5 refunds I would need to contact Fitbit. I intend setting up another fitbit account in my wife's name to see if she will receive a refund for the other 5
@MrRamones01
@MrRamones01 Год назад
Hello. Can you tell me if the process is the same to xiaomi redmi watch lite 2? Great work. Tks
@winonasheppard3952
@winonasheppard3952 Год назад
What size screw driver did you use?
@fixfitbits4860
@fixfitbits4860 Год назад
T2 Torx screwdriver. You can find a link to the one we used at the bottom of our tutorial break down article, which can be found in the description to this video
@simsal8879
@simsal8879 4 месяца назад
I had to use a T3 for Charge3
@simsal8879
@simsal8879 4 месяца назад
Just tried, T2 works as well 😂
@discofishing
@discofishing Год назад
Where do you get the pry tool?
@fixfitbits4860
@fixfitbits4860 Год назад
You can find a link to the pry tool we used at the bottom of our tutorial break down article, which can be found in the description to this video
@spiritlight4440
@spiritlight4440 Год назад
Hey Chris, what temp should the air gun be?
@fixfitbits4860
@fixfitbits4860 Год назад
Roughly around 150 degrees celsius
@spiritlight4440
@spiritlight4440 Год назад
Brilliant, thank you. I'm hoping the process is the same for the charge 4. The screen needs replacing.
@fixfitbits4860
@fixfitbits4860 Год назад
@@spiritlight4440 the housing on the charge 4 is made of plastic so id try it with a much lower temperature
@spiritlight4440
@spiritlight4440 Год назад
@@fixfitbits4860 ahh good shout. Any recommendations on what sort of temperature?
@fixfitbits4860
@fixfitbits4860 Год назад
@@spiritlight4440 no recommendation I'm afraid, we don't deal with this model because of the plastic housing
@tomcoan6965
@tomcoan6965 Год назад
where can i get a better screw driver, the one that came with my kit can not remove the screws ?
@714jk
@714jk Год назад
Got mine on Amazon. Need a T-2 torx
@dddiver2007
@dddiver2007 Год назад
My screen refuses to come off ;-;
@veredictum4503
@veredictum4503 Год назад
Great. Straight to the point, no unncessary blabber!
@SexyPiscean
@SexyPiscean Год назад
Is there a way to replace the clip that holds the band on the fitbit?
@RepairBeatsByDre
@RepairBeatsByDre Год назад
The clips on this model are a part of the housing, you would have to replace the housing as a whole
@MallV0lli0
@MallV0lli0 11 месяцев назад
the clips aer actually held in place by spring loaded thingies like regular watches are. But it;s very hard to push them inwards to replace the plastic clips
@iiamBantin
@iiamBantin Год назад
Great tutorial
@sami4hyypia
@sami4hyypia 2 года назад
What tools are you using to open the screws on the back shield?
@RepairBeatsByDre
@RepairBeatsByDre 2 года назад
T2 torx 25mm
@choppee20
@choppee20 2 года назад
my wife's charge 5's screen went black the other day, it was at 65% when it happened. Green light was still blinking. Got home tried to do the soft reboot with the charging cable but still wont boot up. Charge 5 also wont sync with her phone as well. Any fix you guys have discovered? It was working well before this happened.
@wolfverine9993
@wolfverine9993 Год назад
Did you end up doing a screen replacement? Did it work?
@RepairBeatsByDre
@RepairBeatsByDre Год назад
Sounds like a fault with the motherboard, you'll need to replace the motherboard to resolve the issues
@zangagon8553
@zangagon8553 2 года назад
So I purchased the kit for this on Amazon got the screen off couldn't get screws out ripped out old screen and the watch was still charging and tracking steps. Then I took it to a guy with a more sturdy screw driver and he put the new band in but removed the little chip that the little band goes to. The little band was disconnected already but the chip was still attached under the new screen . The screen wouldn't work but it would charge now it isn't charging. I'm not sure what to do. I watched a video saying the little ribbon was only for the g pay and other pay apps so I thought it didn't matter.