Тёмный
Bang's Bronco II Corral
Bang's Bronco II Corral
Bang's Bronco II Corral
Подписаться
This channel is for all Bronco II lovers that appreciate a good build on a 30+ year old vehicle with aftermarket and junkyard parts.
Комментарии
@duckling4393
@duckling4393 2 месяца назад
My grandma didn't smell musty
@billbolio429
@billbolio429 2 месяца назад
Greetings from Sedona AZ. just got a 1990 little bronco ii and its in a pretty good condition, however, i am planing on replacing some interior and exterior to bring it back to life. Is there someone to guide me to a good source of parts and aftermarket items as needed? Thank you for your help, appreciated
@williamd.6842
@williamd.6842 3 месяца назад
I am in need of a tan dash for my 1989 bronco 2
@diazdoris
@diazdoris 4 месяца назад
After 2-3 years any updates ?
@greenman7yyy
@greenman7yyy 5 месяцев назад
You would be shocked at the difference in suspension performance by simply using the Dual James Duff 70/30 shocks in the front instead of any other brand!!
@EddyRox
@EddyRox 5 месяцев назад
How much this Bronco 2 worth? If you don't mind to asking
@jasonlafountaine9168
@jasonlafountaine9168 5 месяцев назад
Bout to do my 88s fuel pump, so glad I found this. Great job on the video, need more people like you sharing these
@UTBanjo
@UTBanjo 6 месяцев назад
Glad I found this. I think I'll cut mine like yours, and put hinges towards the rear letting the cross brace hold the front. Deburr the hole and panel, and put a rubber seal on it.
@miltonpoppa7213
@miltonpoppa7213 8 месяцев назад
On the 1990 Bronco ll are there 2 fuel pumps or just the one in the tank ?
@cgriff9359
@cgriff9359 6 месяцев назад
There are two. One in the tank and a second high pressure pump along the frame directly below the drivers seat
@algoneby
@algoneby 8 месяцев назад
I;m in Lincoln Nebraska, wondering if you know someone that could help me fix up an 1984 Bronco ii. Need help putting in distributor. Time engine. Thanks. I am getting kinda old, and crippled up, need help. Bronco in garage, have parts.
@daylightpnwproductions4853
@daylightpnwproductions4853 9 месяцев назад
Do you know what kind sway extended links you got or is it generic?
@georgenemeth4837
@georgenemeth4837 Год назад
Very cool!
@JonO387
@JonO387 Год назад
How's this Bronco doing?
@Faceman005
@Faceman005 Год назад
I have my 89 and I don’t like my front but you make me want to keep it. 88 and older has the old school grill and lights
@uptonfg
@uptonfg Год назад
Blue looks greag
@uptonfg
@uptonfg Год назад
Just found your channel got a yard full of bronco 2s myself
@8BloodyKnuckles
@8BloodyKnuckles Год назад
Any more videos and updates?
@policroniades3
@policroniades3 Год назад
Woooow estoy extasiado con esas Broncos 🤠
@panchogonzales6409
@panchogonzales6409 Год назад
Beautiful toys ❤
@policroniades3
@policroniades3 Год назад
Están bien bonitas esas Broncos
@juansaucedo7288
@juansaucedo7288 Год назад
Beautiful
@thisisyourcaptainspeaking2259
I'm working on a front receiver hitch for my '90, was suprised to discover the front frame is considerably different than a Ranger or Explorer. I havent found any aftermarket listings on the interwebs. Are you fabbing your own frame horn mounts?
@thisisyourcaptainspeaking2259
I got my '90 back on the road, fuel tank was full of rust and fuel pump was bad. No rust though, has never seen salt. Your paint is 100% better than mine.
@jagers4xford471
@jagers4xford471 Год назад
Nice Bronco, I own two, one for off road the other a sleeper w/ a 3.2L turbo coupe engine. I once played around with extension brackets on the TTB. For off-roading it's a dangerous waist of time. In fact for street driving it reinforces the chance of roll over. I found there are ways of lowering the CG of the vehicle and still keep the flex and articulation of the suspension. And it looks better. Nice job, it's obvious you but allot of time and effort into your rig. The B2 is one of the nicest looking Broncos made. Love the visibility out the side glass.
@johnleuver9990
@johnleuver9990 Год назад
Can you add some info about what the process was like mounting the B2 brackets on that bumper?
@feelgoodcharlie3822
@feelgoodcharlie3822 Год назад
Could you tell me what year jeep that bumper is from? I'm interested in looking around for jeep bumpers since there aren't too many bronco ii options out there eh.
@jacobdaily3038
@jacobdaily3038 Год назад
What year of jeep bumper did you use?
@madpainter69
@madpainter69 Год назад
Fantastic job!!! and Who cares what other people think. it's your vision and your canvas . great concept and fantastic delivery . And i think you are like me. you are your worst cretic .
@Kk_1100
@Kk_1100 Год назад
Any updates?
@ceesklumper
@ceesklumper Год назад
Very informative.Thanks!
@mattbickel5080
@mattbickel5080 Год назад
I'm huge Bronco II fan. I've owned 2 in my life, but had to sell both due to life circumstances. If you ever think about selling this one - please consider selling to me. I'd love it!
@JustMe-lm1nd
@JustMe-lm1nd Год назад
I have an 89. Just did a complete interior restoration on it. Needs paint but the original isn't bad for an 89... Give me a price!
@mattbickel5080
@mattbickel5080 Год назад
@@JustMe-lm1nd I'd love to see some pictures or videos.
@jessejamesojeda8840
@jessejamesojeda8840 4 месяца назад
I have a 85 II tan interior cherry paint job rebuilt engine, transmission and carburetor
@katherinedimaria4515
@katherinedimaria4515 Год назад
I have an 86 that will turn on but after a few seconds to even up to a minute it turns off. It started once it got cold and I'm thinking it has something to do with the pumps or the pressure regulator. Do you have any thoughts? It seems to be a semi common issue but I haven't found any answers on it
@randyrigenstrup4621
@randyrigenstrup4621 Год назад
Yo we need to see more videos love your Channel wish there was more videos though
@8BloodyKnuckles
@8BloodyKnuckles Год назад
Right on. Looks good man. Iv’e been wanting to do a two tone tan/brown for my 86. Glad I found your channel. Subscribed.
@richardmeyer6021
@richardmeyer6021 2 года назад
Any of your extra parts for sale?
@zach1368
@zach1368 2 года назад
I want those extra bronco seats!!! GIMME A PRICE!!
@zach1368
@zach1368 2 года назад
what the rack on the top of the bronco called?
@RVnewbeonyube069
@RVnewbeonyube069 2 года назад
front axle needs to go forward about 3 inches
@davesgarage.venice
@davesgarage.venice 2 года назад
Where did you get new rear side window rubber trim?
@mrhappy8966
@mrhappy8966 2 года назад
whats up from lincoln nice bronco!
@junoinversiones3718
@junoinversiones3718 2 года назад
very clean work!
@thisisyourcaptainspeaking2259
@thisisyourcaptainspeaking2259 2 года назад
I just started this same project today on my '90 that's been sitting 10 years. Disconnected the fuel lines and dropped the tank. Looks as if someone poured a gallon of dirt down the fuel fill which is also rotten. Parts ordered today: 1) New Fuel Tank 2) New Fuel Pump Assembly: Herko 357GE 3) New Fuel Fill Neck Just under $300 on just these parts.
@thisisyourcaptainspeaking2259
@thisisyourcaptainspeaking2259 2 года назад
I found it best to remove the four horizontal main rear bumper bolts to remove the rear bumper and then remove the tank skid plate.
@GladlyOnXbox
@GladlyOnXbox 2 года назад
just bought my 89 ii a few months ago, still looking for a replacement or OEM tire swing for the back, most sround are $600 on ebay but one day i’ll get it.
@jacobbuckman8297
@jacobbuckman8297 2 года назад
This is very cleaver and an easy access. But man I’d be lying if I said it wouldn’t hurt me to be cutting the body up lol
@darthbuster
@darthbuster 2 года назад
Looks great!
@StevenOrtegaDCstevo
@StevenOrtegaDCstevo 2 года назад
Nice work!!! Like seeing ur content and ur projects
@CRJines
@CRJines 2 года назад
What year explorer did you use? I'm having the same problem and I want to order a radiator
@OOICU812
@OOICU812 2 года назад
I can't believe I watched the whole thing! 😀
@CRJines
@CRJines 2 года назад
did you extend the wheels out any? Did you use spacers or offset rims to do so? I have an 86 that I'm working on
@bangsbroncoiicorral127
@bangsbroncoiicorral127 2 года назад
The wheels are ION alloy 15" I believe they are 4MM offset. Easy to find on their website.
@Southernbirdiegolf
@Southernbirdiegolf 2 года назад
Hi! I have a 89 also and I’ve searched everywhere with no luck on steel bumpers. Where is yours from
@KDub57
@KDub57 2 года назад
Who did you get your axles from? I'm getting ready to rebuild my stock 2WD 89 BII and am looking for an upgrade.