@@JBauerProject I started with the test version from reaper then switched to Mulab7 and I have used the MTPOWER Drumkit VST from the beginning. But it was a lot of trial and error. At first had a small notebook which didn't have enough RAM then got a PC but had to watch a lot of videos to get it all to work!!👍😀
Yes, Diet has a lot of stuff that hurts some of us. Every participating Canadain A&W has donation cans where you do not HAVE to eat a burger, they have other items on their menu to keep you in food while you meet everyone in that MS community where you purchase on August 16th. Those Donation cans sit out all year and are donated 100% to the MS Society. The Teen burger just donates 2 bucks, only for limited hours on Aug 16th in 2018
It wants a validation code when registering. I read somewhere that it's the MAC address. But they are not very specific on which MAC address. I tried the MAC address of the TVN10 NVR, created a username and password, but it comes back invalid MAC address.
Dominic MacCuaig newer firmware for TRUVISION DVRs will not work by going to the ezddns site anymore. You can automatically do the ezddns process by now going to the ddns tab in the TRUVISION DVR menu directly and entering the name you'd like to use and clicking either 'save' or ' get url' then save. This will create the ddns entry for you. Make sure to have your pets open first before trying this as it will fail otherwise.
Jesse Bauer ok. My ports were opened in the router. But when going to canyouseeme, the ports were closed. Figured out that the default IP that that the NVR has needs to be changed. I changed to IP address but kept the same ports I choose and now I can see the ports open. Did the ddns and have the URL it gave me. But when I type the URL, it won’t pull it up. I’m on the same network as the NVR. I guess I need to try it remotely. I also tried typing the IP address with : then port #. Still nothing.
Dominic MacCuaig and you have the same ports opened in the router assigned in the NVR? Definitely need to hide ddns remotely otherwise it won't work. In Local network, there ip of the NVR should work, make sure you use internet explorer 11 or less only, and type ipaddress:port, and use the http port you assigned in nvr. Also, can you ping the IP of the NVR locally?
based on what saw...... to put it as a simply as possible. all your drum is sending to reason is midi. it is simply a controller not an instrument. the midi notes in the sequencer must correspond to an instrument within the rack. next step would be to have the midi notes activate pads in a kong ,or an instrument module like id8 instrument module.