Son, this makes me proud!! Your diligence and workmanship is over the top. I love your choice of music. Yup, I remember all these songs. A real joy to ride in that "bucket."
Thanks for your video on this issue. I'm having the exact same problem with my 2018 chevy Silverado from differential fill plug. I have done all the same things on this plug as you had done minus the air hammer trick. Will try that tomorrow, but I'm done for tonight....thx!
Very helpful, I watched this video so many times and did it today, I added sound deadening to the trunk and this video was on point with everything that needed to be done. Helped me tremendously and I was done in so much less time.
What kind of symptoms Were you receiving or seeing on the camera? Was it a snowy screen? A black screen or any other problems, I’m having an issue with my screen.
I did put the cables together after disconecting..then 2 hours later conected..and car started..ty sir...still have to see if it's battery or alternator or starter issue but thoes work to turn on ...not risking driving thoe I'm just glad is on ...thanks again
For anyone watching - the camera connector is not waterproof and prone to corrosion causing all sorts of problems (no camera, reverse image, other gremlins) - clean and add dielectric grease to the connnector
Endeavoring on this escapade now. Handy to have a heads up how it pops off. I am also going to take off the rear applique so I can install some aftermarket rear facing tail lights on the hatch. Then run the wires around the window and hide it with the trim. If I can pop the grommets or access where the wires come through between the hatch and frame I'll try to do that so I can keep everything hidden. But ultimately I'm going to have to run the wires to the tail lights and connect them there since my idea for a 4 pin connector won't work with the lights I got with a decelerometer on them.
So glad I haven’t had that problem yet 🥴and I pray it doesn’t happen to me I’m a woman 68 don’t know a thing in what I would do thank you so much for sharing your video
It was the camera. I reviewed other RU-vid videos where they were saying the connector was not a weatherproof connector and was susceptible to corrosion. I figured I would check the connector first before replacing the camera. It was worth the effort to remove the panel and I found it even easier to re-install.
Thank for this Sir! You saved me. I did exactly what you said and removed the battery terminals and took a copper wire and shorted it for about 2 minutes. The first ignition was faulty and I was concerned. Then the second ignition went through and powered it all back up!!!! Thank you!
Son of a gun it worked!!! Battery too dead to come to life. Drained the car with a wire like you said. Waited an hour and put in a new battery and boom it started!!! Thanks bro!
I simply shorted the vehicle’s two disconnected battery cable terminals together.and held it for a few minutes. This simply drains any excess energy in the system.