We offer FREE phone support call us 6 days a week at 559-264-9111 and we will help you get the correct item and install it properly. Specializes in Viper Car Alarms, Clifford, Python, Avital, Remote Start, Flashlogic, Vehicle Security Systems. Best selection in plug and play remote starters.
Hi, I have the same exact car. Does the heat starts without the engine starting? Normally if the engine doesn't start the heat is just cold air. Thanks
hello I am working with FLRF2 in a module FLRSCH4 everything in a grand cherokee 2008 apparently it works closes and opens the doors and starts the truck but the control screen only shows an open lock, it is as if it does not work in 2 ways, do you know something about it?
I bought this kit a long time ago for a 2013 fusion se, can you help me if it no longer wanted to turn on remotely, what is the procedure to reset it, turn it back on, I don't have warning lights on the dashboard, when I try to turn it on from the control, only the lights flash but it doesn't turn on remotely. please help
Hey! I have the same alarm system but am running in to a problem now, my battery died last night and after I recharged the battery the alarm/remote doesnt work anymore. Any tips?
Thank you for the tutorial. However, I live in North Dakota where it can get very cold during winters. If I order and install this product on my 2014 hybrid, will it help me warm up the engine and defrost the windshield during the winter season? Or will it only let the electric motor run? Also, I don’t like the horn is it possible I can have it without? Please let me know. Thank you.
Mine stopped working today after I put a new oil cooler on my vehicle. I tried to reset steps but it's flashing for on green already so what do I need to do and why would this thing stop working because I change my oil cooler
Yo compré de ellos por este video tengo un 2015 honda accord ex-l la instalación fue rápida como un rayo,no tuve que instalar los conectores al steering ya que mi auto no los trae lo que me permitió que el trabajo lo finalizará super rapido,el remoto trabaja excelente.
This is such a great product. My son had spent well over $700 to have a shop install a remote start system on his 2014 Ford Fusion. The shop cut wires, spliced wires, soldered wires, heat shrink wires. Added wires under the hood, center console and behind the dash. Had to buy/program an extra key + buy a module box thing for the extra key to be left in the car. The shop had his car for 3 days. I have a 2016 Ford Fusion and bought the remote start module as seen in the above video.......I installed it myself in less than 15 mins. 🧐
I tried to install the remote starter in 2013 Fusion SE. I followed written instructions they is shipped with the package. Installation did not go through as expected. With red connector connected, my LED flashes three times red. I never see solid LED. I need help. What is customer care number?
READ THIS BEFORE PURCHASE! TLDR: product works, rude and unhelpful technical support, might take an hour Hello fellow Fusion owner. I am writing this review because I struggled to install the remote start in this video and would like to caution future buyers so they'll know what they might be getting into. My order arrived Nov 20 and I finally got it installed on Dec 8 after a bunch of research and purchasing the right tools. *PART 1: Rude and unhelpful technical support* I was not able to remove the obd plug as easy as it looked in the video. The back of my plug was blocked by a metal frame. The video only showed him reaching into the back and plugging it out but doesn't show what's going on in the back. I called technical support and the first thing he told me was to watch the video which I already had (and over 10 times). Past that, he made no effort to help diagnose my issue. He said that hundreds of people have done it with no issue and I should ask someone else (which I also did and they weren't able to do it either). He was not prepared to actually help me out. I finally suggested if he would let me send over a picture (which if he had really wanted to help I'd imagine he'd be the one suggesting that). Keep in mind this was all while carrying a rude tone. And when I got a reply on the picture I sent it was not helpful either. They told me to remove a screw that even in the picture was clearly blocked by something else (which I later figured was the knee airbag). *PART 2: How I figured out how to do it* I watched another video that was also to install a remote start (from another company) and they suggested to remove the obd port (a.k.a gateway module). The issue was that the 7mm was covered by the knee airbag. I read the manual to remove the driver-side knee air bag which required a 10mm ratchet wrench (the area is too tight for a regular wrench), a T20 screw for the panel below the steering wheel. Then only are you able to pop down the gateway module to easily unplug the obd. Everything else became as straightforward as the video once I was able to do that. In conclusion, if you are buying this with the impression that you will only need 5 minutes and no tools to install, I recommend you first check if you can unplug the obd plug as easily as in the video before you purchase. If you are not able to, it means you might need to do the same procedure to drop down the gateway module which will involve removing the knee air bag which will take up to an hour and requires tools. On a side note, after I sent a message with the picture to ask for help on the seller's page. My ebay account got permanently suspended. I created my account for the sole purpose of this remote start so something tells me the seller went out of their way to have me suspended just so they won't have to actually help me out or give me a chance to leave a legitimate negative review. But end of the day, I don't have a way of confirming this theory so I'll leave it up to interpretation. But anyways, the product works. And I feel accomplished having been able to figure it out myself. I did a ton of research to figure out what was going on down there and also tried a bunch of tools so I'm happy that paid off.
I have an issue. I installed a ASCL6 Carlink, did a firmware upgrade, did a reprogram so modual accepts the carlink. remote start does work, carlink works. as soon as i put my key in and try to drive, the imobilizer light comes on. Although i still can drive my car. If i dont use the remote start and just use my key the imobilzer light does not ilumminate.
Je suis Français . Sur ma Wrangler JKU Pentastar 2018 le démarrage à distance ne fonctionne plus .. j ai reprogrammé , ça ne fonctionne pas , j ai fait comme sur la vidéo , ça ne fonctionne pas … help .. help help . Comment faire ?
Does this head unit have Android Auto support? Considering Android has 45% market share in the US and 70% globally for smartphone users this is a pretty important feature to mention whether it has it or not.