How To Install 2013 Ford Fusion Remote Car Starter Simple Do It Yourself 

This is such a great product. My son had spent well over $700 to have a shop install a remote start system on his 2014 Ford Fusion. The shop cut wires, spliced wires, soldered wires, heat shrink wires. Added wires under the hood, center console and behind the dash. Had to buy/program an extra key + buy a module box thing for the extra key to be left in the car. The shop had his car for 3 days. I have a 2016 Ford Fusion and bought the remote start module as seen in the above video.......I installed it myself in less than 15 mins. 🧐

This remote start just works - and it was like $80 cheaper than I could find elsewhere. Thanks for the video and the great product guys!

One of the best tutorials I've seen thank you really appreciate it I'll buy all my stuff from y'all

Got mine in the mail today and installed within 7 minutes. Read the instructions please, this video is just a guide. Thanks much and hoping to make good use of it 👍👍👍

This was as easy as he said it was! My son installed my remote starter in about 8 minutes, with the greatest time spent releasing the original harness! It works great! He is now going to buy one and install on his car.

I just placed my order earlier today and just saw your guys video!

It worked well on my 2013 Ford Fusion SE. Great product. Totally recommend it👍👌

Just received this today and it works great.

This technique worked well on my wife's car and my wife!

FOLLOW UP COMMENT...had to contact the location because I couldn't get it to work...found out I have the other model and was walked through every step (because I'm an idiot 🤦🏼‍♂️) and was able to get it to work as it should!!! You've got a customer for life...and helped me make, one soon to be, VERY HAPPY girl on Christmas morning!!! Thank you for the help!!!

Great product. Easiest install ever. I wanted a great value product option and I’m more then satisfied with this product. I live in the Midwest and this just made my winter a little bit more tolerable. Thanks J

Works great! I got the 15 one and it's going great

Had mine for almost 2 months. No issues. I installed the no honk starter in my 2014 ford fusion. Thanks J's

Just installed it a half hour ago. Once I was able to get the OBDII port to unplug, I was done in like 3 minutes. Works great! Highly recommended 👌

I bought this and installed it in under 10 mins. It works on my 2013 Ford Fusion SE. Best $150 investment.

Thank you for the tutorial. However, I live in North Dakota where it can get very cold during winters. If I order and install this product on my 2014 hybrid, will it help me warm up the engine and defrost the windshield during the winter season? Or will it only let the electric motor run? Also, I don’t like the horn is it possible I can have it without? Please let me know. Thank you.

Based on the video, it looks like it works with just the standard key that comes with your vehicle. That being said, is it possible to program it for both keys or can you only program it for one of them?

will the obd 2 plug still work like normal, take readings. and possibly flashing with the 4 inch to 8 inch conversion?

Hey There! Got a question for you, I have a 2012 Ford Fiesta with power locks but no central locking, do you have any recommendations for adding 3rd party central locking? Thanks!

looking at buying it. I I have 2 keys . do I program both keys using the red wire being first then plugging into black one ( one at a time) then other key , or do I only have to do 1 key which covers both? thx

The remote start works great but it’s starting to get cold where I live and my car will only blow cold air when it’s remotely started. Once I put the key in it changes over to where I left it when turned the car off. Is there any way to get the car to blow heat when it’s running remotely? Thanks

Hi, I had this unit for more than 2 yrs , it's a 2013 Fusion 1.6 non hybrid,works fine but is there any way you can heat to work when remote start is going ? It just blows cold air until you turn key on (takeover) ?

I bought this kit a long time ago for a 2013 fusion se, can you help me if it no longer wanted to turn on remotely, what is the procedure to reset it, turn it back on, I don't have warning lights on the dashboard, when I try to turn it on from the control, only the lights flash but it doesn't turn on remotely. please help

Nice

Cab the remote starter be setup as a lock unlock lock unit or does it take a different module for No Honk starting?

On ur 2012 fusion kits do u have to have 2 keys

Hello! Will it work safely on my Fusion Energi plug in hybrid? I want this function especially to turn heat/AC while charging. Will it work for me?

After installing will I be able to upgrade to a key fob with a dedicated remote start button?

Will the remote start still work if i get a new key for my car??? My key doesn't reach very far and I would get another one but idk if it will work with the remote start?

Do you have a kit for a 2015 nissan rougue??

Does it come with the key fob u were holding in the beginning of the video?

i have a 2014 fusion se with base instrument cluster and base radio, will it still work?

I used that remote starter in my Ford Explorer but when I live the acc or heat on . It start but the acc or is not worcking until press the brake pedal also the parcking lights only worcking on front not the rear , I need help thanks. Do I have to resetting?

Hi. Does this apply to the 2013 Ford Fusion Energi Pugin hybrid?

My 2013 Ford Fusion came with a remote start "fob", a separate remote control. My problem is, the remote starter stopped working, I changed the (button) battery time and time again and it's still not working. I wonder if I need to install a "J's Alarms" and can the other be uninstalled?. Thank you for your video. I will save your video until I hear from you, I will purchase it as long as it is compatible, that's why I would like to hear back from you first. Thanks.

Will my 2013 ford fusion SE heat get hot with this remote start without the engine on?

I do have one question. Can you program multiple keys?

Does it work with 2016 Ford fusion s.e.?

Is this just for the 2013 Ford Fusion? I have a 2016 Fusion SE. Will it work on my car? Also u said it doesn’t start the car? Did I hear that correct? I live in Arizona where it gets 120 degrees in the summer. I wanted a remote start to start the car and get the AC going before I get in. Will it still turn the AC on if the car isn’t running?

Hi, I just bought one yesterday is there any way to turn it on without the hork?

am i able to still use the obd2 port for my tune? or will it not work?

I installed this product quick and easy works all but the heat/ac. They do not come on when i start the car even if i shut it off with them on.

Hi, I have a question about this, can the engine be turned off with the key to after starting it with the key, and are their any other buttons that can be programmed to start the car or any other combination, Thanks!

A already programed Ipc to show remote start option, does this kit will work with oem remote start option? Like on/off system and climete Control?

purchasing one for 2016 ford fusion se.. does installing this activate the oem remote start cluster settings ?

I tried to install the remote starter in 2013 Fusion SE. I followed written instructions they is shipped with the package. Installation did not go through as expected. With red connector connected, my LED flashes three times red. I never see solid LED. I need help. What is customer care number?

Is works for ford fusion 2010 too ?

Do you have any instructions on how to reset this device when you transfer it to another Fusion?

Its will work with the remote battwry is low? Because mine only start sometimes

i just simply cannot remove the obd2 cord like it’s not budging at all, i’ve tried pushing the tab and pulling and nothing is happening

Is there anyway you can turn the vehicle off after you’ve remote started it with remote?

is it just the hybrid model or does it work on the standard gas model

So if I mine is not a hybrid the motor will turn on with the heater or ac ?

Does the vehicle turns off when you open the car door to get in? I have seen some remote start kits that when you open the door to get in the car turns off and you have to turn it on again. Please let me know. Thanks

Sill this work for the 2017?

If I don’t have the hybrid, will it actually start the motor?

Is there any chance this would work with the 6-speed manual transmission?

I installed it last summer and it worked till now and just stopped working. Any ideas how to fix it

going to purchase soon , i read the comments and see how long it will run and it goes to the last setting , i want to know what all the safety features and any other features the modules comes with.

Does this crank the engine for the 2013 se model?

I have a fusion 2014 se. it didn't work in my car, it doesn't turn on the green light and then it turns off in the second procedure

does work an a 2012 ford fusion to ? is it the same install instructions ?

I received this for my 2013 Ford fusion I followed all the steps on the paper it showed all the lights correctly but when I hit the lock button 3 times it does not start I can hear the module make click noise every few seconds but that's it. any advice?

Will this work on my 2.0l eco boost?

How long does the car stay on for before shutting off

I'm confused on how the heating works without turning the actual motor on.. where does my hybrid have an electric heating unit?

Does this apply to 2013 ford fusion non hybrid?

Will the car turn off if it’s running in idle for a while ?

How do you reset it so it'll work if it doesn't work the first time. I did everything correctly but it still will not remote start. There are no lights on the dash or low fuel light. New wire harness did nothing to change my situation. This is making it VERY HARD to be a "surprise" when I'm constantly pulling panels and not having any success!! Please help!!!

Will this work for a 2012 Ford Fusion?

I got this today and I followed all instructions. Doors are all closed hood is closed no lights on dash and when I press lock 3X the dash comes on then turns off right away. After that parking lights blink and car does not start. Please help!!

Is it programmable. Like when you remote start it will it run what the heat B was last set at?

can i install it in my fusion 2013 1.6 turbo?

I’m struggling so much I can’t take the wire connector off. There is a metal barrier right behind the wire connector thats not allowing me to unplug it.

Does this turn on heated seats?

Hi, for Mondeo mk5 Powersift work ? Model europe ?

Mine has stopped working. Marker lights flash but it wont try to start. Any ideas?

Hi Work perfect but after I change battery for car The remote now doesn’t work How I can fix that

What is the working range of this remote starter

My wife has a 2013 fusion hybrid. Tried navigating your site, but not sure how to view the products. Clicked on “shop” then “remote start”. No products showed so I search “Ford Fusion”.... nothing... then tried just “fusion” and “ford”. Anyways. Want pricing on that exact remote start in this video. As a first time buyer from your company, I would prefer to use a website vs giving my card info over the phone.

Got my remote start today and couldn’t figure out how to get the port unplugged to do my remote start

will this hurt your cars battery

I see that there is also a model that says "No horn honk"? What's the different remote start combination for this model?

How far does this reach?

Where can I buy this module at

Will it work for 2012

Made it to the last step. It turns solid red, flashes green rapidly, then continuously flashes red slowly. Remote start not working

Work for 2013 SE 2.5?

But my it start for sec then it go off

It doesn’t work. after I’ve plugged in black plug. it started flashing red light,then blinked car’s lights and slowly flashing red light.

I did everything on the paper and still not working tried 4 times contacting technical support in the morning

READ THIS BEFORE PURCHASE! TLDR: product works, rude and unhelpful technical support, might take an hour Hello fellow Fusion owner. I am writing this review because I struggled to install the remote start in this video and would like to caution future buyers so they'll know what they might be getting into. My order arrived Nov 20 and I finally got it installed on Dec 8 after a bunch of research and purchasing the right tools. *PART 1: Rude and unhelpful technical support* I was not able to remove the obd plug as easy as it looked in the video. The back of my plug was blocked by a metal frame. The video only showed him reaching into the back and plugging it out but doesn't show what's going on in the back. I called technical support and the first thing he told me was to watch the video which I already had (and over 10 times). Past that, he made no effort to help diagnose my issue. He said that hundreds of people have done it with no issue and I should ask someone else (which I also did and they weren't able to do it either). He was not prepared to actually help me out. I finally suggested if he would let me send over a picture (which if he had really wanted to help I'd imagine he'd be the one suggesting that). Keep in mind this was all while carrying a rude tone. And when I got a reply on the picture I sent it was not helpful either. They told me to remove a screw that even in the picture was clearly blocked by something else (which I later figured was the knee airbag). *PART 2: How I figured out how to do it* I watched another video that was also to install a remote start (from another company) and they suggested to remove the obd port (a.k.a gateway module). The issue was that the 7mm was covered by the knee airbag. I read the manual to remove the driver-side knee air bag which required a 10mm ratchet wrench (the area is too tight for a regular wrench), a T20 screw for the panel below the steering wheel. Then only are you able to pop down the gateway module to easily unplug the obd. Everything else became as straightforward as the video once I was able to do that. In conclusion, if you are buying this with the impression that you will only need 5 minutes and no tools to install, I recommend you first check if you can unplug the obd plug as easily as in the video before you purchase. If you are not able to, it means you might need to do the same procedure to drop down the gateway module which will involve removing the knee air bag which will take up to an hour and requires tools. On a side note, after I sent a message with the picture to ask for help on the seller's page. My ebay account got permanently suspended. I created my account for the sole purpose of this remote start so something tells me the seller went out of their way to have me suspended just so they won't have to actually help me out or give me a chance to leave a legitimate negative review. But end of the day, I don't have a way of confirming this theory so I'll leave it up to interpretation. But anyways, the product works. And I feel accomplished having been able to figure it out myself. I did a ton of research to figure out what was going on down there and also tried a bunch of tools so I'm happy that paid off.

This doesn’t even start my car beside 1/10 times trying….