Hello sir, I want to make 2nd key bcs I lost the 2nd. So I purchased new remote 4rm Amazon. Remote is working new key is made by key maker. It opens the door with remote nd wt key but how to start the engine.. Does this remote comes wt the chip...? Waiting for ur rply. Thxs & Rgds
Great idea, well execution. I'd like to do something similar, without steeling your idea. But great content, and good job on doing that setup it was very constructive, and I can appreciate something like this because it was well thought and well executed like I said before, just awesome. What else can I say....
Product contains a chlorine based bleaching agent at 5% so 95% water. A good bleach contains 10 - 15% Sodium Hypochlorite this is what dissolves the cell walls and then dissolves the cell contents as they are released into solution. All cleaning agents have a contact time, the longer you leave bleach on the longer it dissolves organic matter. So go to Aldi's and buy a bleach that has good stickiness, surface adhesion to stay in contact with the organic matter to dissolve. Rinse off and dry. Now nobody has talked about prevention of mould reforming, that requires the application of a mould inhibitor, this product can then be applied and creates conditions that do not support mould regrowth. Best of luck and happy mould hunting :)
I feel your pain. I've got a 06 focus c max . I've been searching for ages trying to find a way to run my power cable through. I've got a double din and it's cracked the original plastic 😅
Ive just reconditioned my injectors and put new valve noozle control valves at 26 pound a pop off ebay done them myself and it took me an hour to do each injector from start to finish for each one there all brand new now
Very confusing statements and and repeating the same confusing instructions over and over. Donor key and my key, what is the working or the original one??? And this task is only to make a spare key (the correct way to call it) to command the doors' locks!!!
ive had this issue with ford mustangs for yrs. from 96 to the 2009 i have now, ive had 3 the top part ends up coming loose an out of 4 mustangs its happen on all or was already like this from the time i got it an i was lucky at times an was able to catch it an didnt lose the metal part of the key or the black plastic part but ive also not been so lucky an ended up losing the key an only have the black plastic part left on my keyring an in that case i had to hold the chip section up next to the ignition as i started the car with the original door and truck key, if u just used the door an trunk key it would start an then shut back off with the anti theft light flashing. just picked up a 2009 mustang gt about a week ago an it was the same way as the one i lost the metal part of the key with so they had the black plastic chip tapped to the door an trunk key, it works fine but its a sticky mess an its even worse for wear then the 96 gt i had cause the loop that u would attach the black plastic part to a key ring had been ripped off an this seems to be really common but i own 3d printers now when i didnt the last time i dealt with something like this so ive come up with a 3d model quick that will hold it all together as one piece an keep from having to worry about losing any of it but its what u would imagine it would be, really really thick cause its basiclly stacking 2 keys ontop of each other so id like to get my hands on one that i could start cutting away the plastic to see if i could at least get it back down to the original thickness and if i can manage that ill be extremely happy. but one of the reasons ive always had to do it this way was cause i was never able to get a key cut an programmed cause they always told me the car was to old to have it done so i was pretty much told to figure it out. i was always lucky enough that i could manage to keep the cars going but if this happen to someone who wasn't someone who dealt with cars alot they would be stranded. for anyone who has this issue ive had countless times an has 3d printers, www.thingiverse.com/thing:6145698 hers what i came up with to just to keep the parts together an usable like a normal key, the thinner u can get it the better just sand away the material thats not needed or reach out an i'll make the changes to the model itself if u manage to get it really thin plus id like to know how it goes for anyone who trys to remove as much plastic as they can from the chip side.
In our older Freightliner the power pretty works but it flickers of and on with every single bump. I am assuming there's a loose connection. Takes forever to charge phone. Not enough power to run a GPS or little fan. Oh and anyone who knows freightliners with know it's bumpy ride!
Wow bro without your video i can't install my amp in focus mk1 wagon. I always install amps in Mercedes and it's easy but in this ford it's complicated.✌✌😎😎
18:29 “nasty bendy shit!”😂😂😂 you had me laughing there!! Great video!! What does the beam pattern look like? I never had the reflector type HID kit! But I just want to know what it looks like when you shot it onto the wall!
I know this is an old video (I'm posting on 31st Jan 2023), but this is the information I needed. My remote stopped working after a vattery change and just won't reprogram. The key still starts the car. I obtained a new key, which is now able to unlock the central locking but won't start the car. So your video shows how I can fix it. Thanks.