Helpful advice! I recently got my hands on a second-hand Concept 2 rowing machine. I’m on the lookout for a handy accessory or trick that can help me keep the rowing machine’s chain in good condition. Any recommendations from you all?
Generally the stainless topper does not wear out per se. It usually is replaced after somebody drops something heavy on it and dents it creating a speed bump/dip in the rail Which makes for a very annoying seat slide. The only time I replace the toppers is for damage from something falling on top of the rail - usually in a gym
Noah Shapiro: The seat rollers almost never need lubrication in the roller bearings. To oil them if you do, you need to remove the seat, then remove the rollers so you can have access to the bearing and put a drop or two of oil on race. Bleach will help to kill bacteria, but will not do much beyond that. Keeping the wheels clean where they contact the rail is key.
This video made changing my bungee cord easy. Watched it a couple of times, before I attempted the cord change, and was able to change it easily. Thank-you
thank you for this video, and adding what you used in the bottle for cleaning.My rower was sounding like I was on the train tracks, bump, bump, bump...driving me nuts, could feel it through the seat and MY seat! was crazy making! Cleaned up in a flash with Windex!No more bumpy seat!Smile!
Alice Downing Amazing how much black crud you end up cleaning off the wheels and rail ungh? Will take a clean paper towel or cloth and turn into a coal miners hankie! Thanks for your comment and glad you now have a smooth ride on your rower
"Black flecks on your rail are normal. They are a combination of dirt, perspiration, molydisulfide (a lubricant from the plastic rollers) and a very small amount of the nylon plastic that the rollers are made of. These four components are subjected to the mechanical action of the rollers and can dry and harden on the rail. To remove the black residue, clean the monorail. Wipe the monorail with a cloth or non-abrasive scouring pad after use. You can use soap and water or any glass cleaner. Do not use mineral acids, bleach or coarse abrasives." From the concept2 website. The stainless steel foil on the rail experiences almost zero wear during the entire lifetime of the machine. The polishing on the contacts is just that...polishing.
+volvo245 I disagree with at least the portion of C2's statement that the stainless steel rail cap doesn't wear; it absolutely wears as evidenced by the marks left by the seat rollers while the center remains shiny and like new. In any event, cleaning the rail AND THE WHEELS/ROLLERS should be done with each use.
@@ergmeister should you ever replace the rail due to wear? I have a beaten up model C, the rail is smooth but clearly worn. It is smooth though and the sezt slides on it, would there be any reason to replace this?
I have used semi chrome successfully many times to restore a rail with wear on the roller contact points and you can make the stainless topper look almost new by polishing with simichrome. As long as the seats slide is smooth and if you pull the seat to the rear of the rail and release it it will slowly roll to the front and bounce off the nose then the topper is clean and the wheels are sufficiently clean
The problem with this video is that he doesn't mention the name of the liquid he uses. Water? Glass cleaner? Multi-purpose cleaner? Laundry detergent? That omission detracts a great deal from what otherwise is a very informative presentation. I've used the same technique with Windex after every workout for more than ten years. It's safe for both the rail and the rollers and it cleans them very well. Unfortunately, I have no idea what cleaning agent the presenter is using. Is it better than Windex? Who knows?
+sekitori25 I'm sorry you see this as a problem, but all that was used is glass cleaner. You can use water or a little dish soap and water but a wet terry towel with either water or glass cleaner will clean up the debris and residue.
Dishwashing soap is strong stuff and may dry out the plastic rollers over time. I'm probably going to be safe and just use plain old Windex. I just checked the Concept2 website and they suggest the following: Tools Needed: Cloth Cleaner: soap & water or any glass cleaner NO: Mineral Acids, Bleach, Coarse Abrasives
+Dennis Shumaker Yes, glass cleaner and/or a little soapy water and diaper or terry towel. It comes right off and you can keep the rollers like new if done regularly.
Carl Green: I wouldn't take a guess at what the next evolution of rower from C2 will look like. The Model E is exactly the same as the D except it is positioned higher with longer legs and is intended for use mobility impaired users.
The key to splits is the drag factor. Gym rowers tend to be beaten up and not maintained well. Set the damper on the cage to what you want. Next navigate the PM3/PM4 display to drag factor. Start pulling and note the number. The more dust in the machine the SLOWER your split will be. A new Model D should have drag factor range from 90-100 at damper 1 and 210-220 at damper 10. I pull at drag factor 115 and the damper setting to get that varies on every machine. email me:ergrepair@gmail.com