The relevance is they are both an option in a fitting ...such as Srixon ZX MK2 irons where both are available

Not bad eh... Little higher in peak height and landing angle than I'd like in raw data but if your looking to land the ball with loads of control, you're in good shape What's currently in the irons?

I230 but they are power spec. Want to reduce the lofts. Tried the accra tzi 115x today was really nice felt abit more stable than the mmt 105s but still nice.in the handle. Axiom I felt like the 105s touch light but the 105x a touch to firm. Also the accra tzi didn't seem to flip over on me

@nellynelson9387 ooooooooh the Accra shafts are sexy ...I've got one in a spare hybrid and it's a beast of a club ...one day I'll be able to do videos on em haha 😄

Angles look good to me 👍 looking for 5500-6500 spin, peak height 99ft is a soft guide for me, easiest to be higher and bring it down with loft/model/shaft 5500 backspin will go further 6500 backspin will stop quicker (Can use the golf ball to fine tune this) This may help as well :) ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-oLsUzHelUTQ.html

Yeah I've tried a few things, but I can't get the process easy enough yet ...Will get there eventually

Correct 👍 many people think the opposite!

In data, yes, but not in feel :) ....A larger pool of data would generally be more fades/right with the C Taper as it's so much heavier ...Once you use the same shaft for a while you dial in to the feel of it.. while I'm flicking from one to another constantly, with such a difference in weight, I'm battling the feels each shaft presents :) but yes, quite close in launch! The Axioms play stiffer than they say

That's a great question, I've not had much dealings with the Tour AD iron shafts ...If I happen across one, I'll get a video out :)

Could be worth trying the Modus 105, have you got anywhere you can test em out together? ...these vids may help: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-E3KHtt5-AQY.htmlsi=6RJYIAs1HXCiHOhl ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-K3iHzs6rrao.htmlsi=MKnYv2Ha2F0Bm0ix

I wouldn't recommend on swing speed alone: I pulled a tendon in my hand and thought I'd go lighter just for the golf course ....put a 5S to good use at 110-114mph ....Found it really easy to hit a draw - dabbled with a 5X, 6S and 6X back at the studio to compare and gradually got harder to draw I need to record that tbf ...There has been a launch of the Velocore+ Black and Red ....I'll have the Black in my demo kit and get some more extensive videos out asap 👌

Thank you :)

Very good question ...I've not directly looked at that ...it's on my ideas board for a video :)

OOOOOoooooooOOoohhh If we get that speed spiked up and awake... then we're cooking :)

Glad it helped!

I'd love to get involved with the Accra line up ..Just haven't got the cash to commit to their first batch order to be a stockist! I got approved but didn't have the dollar bills handy... Soon!

Thank you too! comments really help the channel :)

Thank you so much 😀

Sorry it took so long 😇 lots of moving cogs hehe

@FredzGolf don't be daft really appreciate you doing the comparison. So taking away what you have said basically the axiom weight for weight flex for flex is just abit more stable. I really like the idea of it being a right sided setup too not as easy to turn over. My miss is a hook. The place I had a fitting with called me up and rebooted me for another fitting at different site free of charge so get to try them both again. I'm playing the project x lz 6.0 in my I atm seem ok really nice feel but. Something abit easier on the joints but as stable would be nice. Thanks for doing the comparison. I'm in Manchester so will try and get down for a fitting or something when I'm down south

It's growing bud :) ...I was thinking as I was editing there's so many little side bets going on here! Was happy to see it mentioned within 20 minutes too hahahah ...thank you mate!

Cheeeeeeeers bruh :)

Correct .....further away from the face is most helpful 👍

@@FredzGolf Thanks

That is a very good question ....I haven't!! ....looking at the success of this video.. I think I need to!! 😋

@@FredzGolf Well it's an idea. Can't find a single video on Callaway draw setting actually being tested.

Like I say, make sure you get THROUGH the ball still 😁

Similar affect, with a bit of progression... It was a while ago that I did that video ...since then I've chosen to just tiger step my most lofted wedge to get the benefits in greenside spin/feel and dispersion but normalise the other wedges with shafts that match the irons or stock wedge shafts , depending on the golfer and budget etc

-1" 👌

Ah Brilliant... glad I could help... comments really help the channel as well so thank you for saying so!! :)

True ...I talk about apex on newer videos ...I was a RU-vid noob when this one was done hehe

They're an 8 iron loft and not exclusively used to "chip" ....I could be boring and do a 5 yard shot

Thank you Peter :) how's the game been?

Improvement after your advice to keep the head outside my hands. Still not sure about my choice of lightweight graphite shafts. Don’t be shocked if I turn up with another set of irons for your attention 😂

@@peterheston1707 Hahaha ...Double check with me first though just in case I can swerve any choices in the right direction :)

ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-_b_O3B_RSMU.html

Cheers for the feedback 😋

Where did you hear that? 😋 launch angle, spin rate, peak height or all of the above?

Thanks for the feedback, let me know how you get on out there with it!!

That would be good but they are long gone I'm afraid, I don't stock Wilson so there's a slim chance I come across a fresh golf ball for a test :(

Niiiiiice ...It's great fun going through the process and very satisfying to play with them after :) Enjoy!

Cheers bruh :)

Nice ...cheers for the feedback ...I don't blurt stuff out without evidence it works hehe ...I want people playing their best ahead of clickbait views (although if I can get both then that's a bonus)

Cheers bud.. keep at it :)

Thank you, genuinely hope it helps people :)

Top work!! Some really nice gains there... I reckon 3/10 people I give fittings to just have a massive burst in ball speed ...not everyone, granted, but it's so nice to find those boosts ...I had it myself with slapping the high toe on the Triple Diamond haha... maintained all flight more often!

Had to go 44.5" to get the Ping swingweight down, with their stock shafts, they counterbalance perfectly at standard length but I couldn't use a Ping shaft in the Callaway or vice versa :)

Nice! Yeah give them a bash ....interesting how the TP5X has lower spin while the ProV1X has higher spin eh

That makes a lot of sense to me :) the triple diamond tends to be better with upward angles of attack and high toe misses get rewarded somehow I'd gear towards the Max or Max D in a fitting with just that info ...I've seen a few high Spinners benefit from the Max D To be fair ...the Ping is a solid golf club ....I would go and buy one straight off the bat ...test one against your own to curb any curiosity if anything! 😜

How about triple diamond max ?

@suprand I can't actually get my hands on one... only being supplied to the larger Callaway accounts! My callaway accounts is only 4 months old so I need to grow the RU-vid gig to get access next time they have something cool like that 😇

@@suprand​​⁠ I had last year's Triple Diamond. It was epic in the summer, a bit intimidating in the winter. I have a Ping 10K now with a Ventus and I'm not touching anything else unless it's 11K. I have a buddy with a Smoke Max. It's pretty sweet but definitely not as forgiving as the Ping 10K. I am playing it at 7.5 degrees teed way up and have a positive AoA with 2200 to 2400 spin.

@@lkae4great info thanks !

Yes, it does ....progressive tipping (as per tipping instructions) allows the shafts to get progressively easier from Wedges upwards so you get stability with lofted clubs and long irons still able to get airborne You can soft step where you tip less if you need the shaft to have a bit more play ...I wouldn't do that too much, though, as you may as well get a different shaft

Looking for higher ball flight. Purchased Aseries-high-65i-3. What are your thoughts on tipping 1/4 longer to LA's spects. Think that will give me the height I'm looking for. Got fitted for them with a 7 iron. Height was good would like a hair more.

@genescott3989 I'd go 0.5" less tipping than recommended if you haven't tipped already ... Tip trim: PW 2.75" 9i 2.5" 8i 2.0" 7i 1.5" 6i 1.0" 5i 0.5" 4i no tipping Fit them in from there and then do final lengths - I prefer to glue the heads on at this stage then cut to length once they're set (especially if the heads are used)

Good stuff! Love your content!

Yeah I've seen a lot of benefits from a heavier weight in the Max ....the best combo is to reduce the length (which makes the club lighter swingweight wise) then add more mass to the head with a heavier weight ....tends to spike up smash factor which is cool! Cheers, I really like making them and it's good to get feedback 😁

@@FredzGolf I’ll try that! Thanks for the advice 👍🏾

Nice!! Would love to have you in bud 👌 drop me a message on Instagram maybe 🤔 instagram.com/HoleSaleGolf

Gotta call it something I guess ...Callaway's marketing team would know but I'm not savvy to that much inside knowledge :)