Hello welcome to my channel. This channel is all about motors , scooters and bicycles.
The motors: Honda VFR 750 F model 1994 with Sebring exhaust , the Honda MSX 125 model 2017 with full Yoshimura RS 2. Honda CB 500F model 2018 , Honda Rebel model 2020.
The scooters: Peugeot SpeedFight 2 model 2001 the Honda NSC 50R model 2016.
The Bicycles: Koga E-Bike Inspire powered by Bosch model 2013 , Koga Signature Touring Bike model 2011 , the Koga X-Sport 29er model 2014, Koga F3 5.0 model 2017 , and the Batavus Zonar model 2018
Just got one. Don't notice it on the back of an ICE Spint X 26 Tour recumbent trike. ASwell as the trike, will also be usuing it with a Ribble Endurance Ti and maybe the Kona Sutra SE. The trike has a motor, so will be carrying upto 6 batteries aswell as camping gear etc in the trailer.
Mine did 75gps with the cheapest 70cc lc cil and a leovince tt exhaust. But I'm rebuilding the entire moped now, it's gonna have airsal alu sport 70cc lc and yasuni c16, I can't wait to see how fast it goes then
Hello I want to buy a Shark Citycruiser, my head is 57-58 in diameter, I'm not sure which size to take, the LS2 helmet in L size fits me perfectly.. what is the diameter of your head when you took the L size?
Hoi jacob.en geintereseerd in zelfde model fiets want wi namelijk van mn ebike af . De versnellingen schijnen erg goed te zijn.Hoe zit t met de snelheid? Uiteraard hangt dat van de benen af maar enig idee hoe snel die kan wanneer u er voor kiest om sneller te fietsen?
Hoi hoi, hij fietst super licht, met een paar redelijke benen fiets je sneller dan menig E bike. Er zit een goede Shimano groep op, schakelen gaat perfect.
@@JacobAnnema top,dank voor de info E assist beetje zat,gedoe met opladen en zware fiets en nieuwe accu en dat voor 25km pr uur .Denk er zijn alternatieven zoals velomobiel of deze .Voorzie veel spillebeentjes in de toekomst want zowat iedereen zit tegenwoordig op n ebike .Wens u een fijn weekend toe
Maybe the noise is coming from the splines between the Dirveshaft and wheelhub, i think thats why you dont find any faults on the gearbox. I just bought jetforce with the same problem.
Nice vid man! I just got a VFR 750F RC36-1 1993 two days ago. It was first registered in the Netherlands in 1993, brought to Estonia in 2005 and now im the third owner with 52k on the clock and never ridden it and have to wait until spring, very difficult lol :) Do you remeber what did it cost for you in 1994 as I understand you bought it new? Cheers.
Hello Ertti, that’s correct, I bought it new back in ‘94. I think I paid 25.000 guldens that would be something around 11.500€. I still have that same bike.
hello, i was looking at your carb and i have the same one. What air mixture screw is that, i don’t think i have the tool and i was wondering what the screw was and the tool needed to tune it.
@@JacobAnnema the Philips is for the idle screw, I was referring to the air screw, the air screw almost looks like a full circle, which tool do i need for it
@@tauaxy5064 oké, I know what you mean. It’s not possible to adjust this mixture on this carb. Peugeot don’t want you to change this. You have to change the carb if you like to change the mixture of fuel and air.
Can you add fenders to these carts? So during the rain moments everything does not get mud all over the cart? the fenders could just snap on like the tirers. just a suggestion.
I have seen some videos,but yours is the best! Slowly,not In rush,using the tools you should use,good video quality.Do you still have the scooter/moped?I am rebuilding one that was trashed really bad, bought new parts,apart from the main frame and some plastic pieces:))
Thanks for your comment and sorry for my late respons. I sold this speedfight a few years ago but I still regret it. 2 stroke is not done anymore over here, but I like the sound of it.
Hello, I have a problem, I have a Peugeot Speedfight 1 100cc that recently seized up/heat seized. It was not tuned. I then changed the cylinder, piston etc. It now starts up right away, but after a while it dies all of a sudden (as if you had turned off the key) and then I can start it right up again, this usually happens when I go over 60 km/h or uphill. When I changed the cylinder etc, I also cleaned everything thoroughly, such as the carburettor, intake, new air filter, new fuel filter (there was no fuel filter before) new spark plug. I also removed the oil pump and put a metalplate with a gasket over the hole instead, I now mix the oil directly into the gasoline. Some other info that might be important. - When I drive over 60 km/h, it starts to make a noise from the variator (CVT), it´s sounds quite a lot. - When it died, I tried to start it again while it was rolling and then it started right away, but it made a noise from the variator, like something "let go" that had been seized up, like a rubber sound, maybe from the belt. - The variator belt touches the variator cover on the inside and has grinded a cut in the metal. - In the variator, where the weights are, the belt does not go down to the bottom of the wheel. - The clutch bell had turned blue from the heat. - The place where the connecting rod attaches to the crankshaft had turned blue from heat. - There was no fuel filter on it before. But i now saw there is an internal fuel filter in the gastank, can it affect the vacuum if you now have 2 fuel filters. Please help me. Regards Andree.
Hi Jacob bless you I liked your video and koga bike design may I get one because here in my place there is no such bike like yours my place in Morocco and wish you happy summer
Engine works just exellent! How you made it work so perfect. Is 2storke engine right? I think there was no scooter better than that. With manual clock normally. Not electrick.
i wanna buy a speedfight 2 2005 but dont have the money and my dad wont buy me one lel i wanna buy it fot 520 eur, or should i start saving up money for 1 and a half year cuz im not the legal age to get a license for a 50cc
