Тёмный
Kombi Garage
Kombi Garage
Kombi Garage
Подписаться 1,1 тыс.
How do you approach challenges?
In my restoration of my 1961 VW Type 2 Kombi, and 1964 VW Karmann Ghia, I have faced quite a lot of challenges. But I enjoy the process of problem solving, and coming up with methods to solve them. When I started these projects, I never welded, shaped metal, spray painted or worked on engines, so my learning curve was huge.
And I’m still learning.
In my quest to restore these cars, I’ve had to set up my dream garage, which led me down a completely different learning path.
I hope you enjoy my journey, and look forward to hearing from you.
Kombi Garage
Комментарии
@schwarzermann3651
@schwarzermann3651 12 дней назад
1:29 The Type 147 was originally used by german Post and this Typ also named as "Fridolin".
@rickzw67
@rickzw67 Месяц назад
Like trying to purchase a train ticket at Munich station , ridiculously overKOMPLIKATED
@akbarshoed
@akbarshoed 6 месяцев назад
Very useful. Thanks
@johnsaikaly
@johnsaikaly 7 месяцев назад
Maybe you can tell me what year did they make the type 14 Karma Ghia automatic because I have one but I’m not sure if the date is correct 1965 through 1969 what year could it be?
@KombiGarage
@KombiGarage 6 месяцев назад
Hi John, my understanding is that the Type 14 Karmann Ghia with the automatic transmission began in 1960 and continued through to 1974. To get the exact year, we can work that out from the chassis number, located under the rear seat on the tunnel 👍
@johnsaikaly
@johnsaikaly 6 месяцев назад
So my car could be a 1965 as it says on the registration, even though it’s an automatic
@xavierbabin4451
@xavierbabin4451 7 месяцев назад
Cool🎉! Hello from France 🇫🇷❤
@Demop_VW_garage
@Demop_VW_garage 7 месяцев назад
Looking good, did you look at the single post version like mine? They can move anywhere in the shed 😉
@KombiGarage
@KombiGarage 7 месяцев назад
My wife took one look at 1 post and said no way 😂
@Demop_VW_garage
@Demop_VW_garage 7 месяцев назад
haha, My transit van goes on it too ;)
@RobertsChannell
@RobertsChannell 8 месяцев назад
blimmen excellent , well done chap :)
@rager1969
@rager1969 8 месяцев назад
Cool. Now go over the Mk.
@KombiGarage
@KombiGarage 7 месяцев назад
🙂 my brain is still in a spin from Types
@TheRealJoeMama1
@TheRealJoeMama1 8 месяцев назад
Why do you think this requires 'music'?
@andrefiset3569
@andrefiset3569 8 месяцев назад
No Kûbelwagen, it was produced in more quantity than the Schwimmwagen and is different to the Thing. There's also the Kommandeurswagen which is a 4WD Beetle produced during the war. Nice images indeed.
@KombiGarage
@KombiGarage 8 месяцев назад
Good information, thank you. So there seems to be a Type 8 used during the war. I can see that the Kommandeurswagen is a Type 87 and the Kubelwagen is a Type 82, and went under other type numbers as well.
@kyabrammotors2125
@kyabrammotors2125 8 месяцев назад
Great video.
@KombiGarage
@KombiGarage 8 месяцев назад
Thanks!
@damon0099
@damon0099 8 месяцев назад
joe you forgot type 4's
@KombiGarage
@KombiGarage 8 месяцев назад
👀 Oh dear, will need to do a special on that!
@Demop_VW_garage
@Demop_VW_garage 8 месяцев назад
Great explanation mate 👍🏽👊🏽🙏
@KombiGarage
@KombiGarage 8 месяцев назад
Thanks Nick 👍
@xavierbabin4451
@xavierbabin4451 8 месяцев назад
Interesting ! It's a good review, good job! As usual, Your video are Always well done . Thanks you , it's a pleasure. Hello from France 🇫🇷.
@KombiGarage
@KombiGarage 8 месяцев назад
Merci
@xavierbabin4451
@xavierbabin4451 9 месяцев назад
Australie ?
@KombiGarage
@KombiGarage 9 месяцев назад
Yes, In Victoria 👍
@xavierbabin4451
@xavierbabin4451 9 месяцев назад
Great vidéo !
@KombiGarage
@KombiGarage 9 месяцев назад
merci
@xavierbabin4451
@xavierbabin4451 9 месяцев назад
Super work Hello from France 🇫🇷
@KombiGarage
@KombiGarage 9 месяцев назад
Bonjour, merci d'avoir regardé les vidéos
@paper601
@paper601 Год назад
What a day! ❤
@allanbrowne111
@allanbrowne111 Год назад
So how did you end up taking the roof off?
@KombiGarage
@KombiGarage Год назад
Hi Allan, it was a combination of methods. The thin chisel worked well for the rust out sections, and drilling the spot welds worked for the healthier sections. 👍
@kevinhamling1963
@kevinhamling1963 Год назад
G'day, It looks like the floor is coming out reasonably well. What size drill bit did you use on the spot weld. 🤔
@KombiGarage
@KombiGarage Год назад
G’day Kevin, I used an 8mm drill it, but only penetrated the top layer partially. Cheers.
@kevinhamling1963
@kevinhamling1963 Год назад
@@KombiGarage ✌️
@AbdelOveAllhan
@AbdelOveAllhan Год назад
...must...have...more...KG...😩
@AbdelOveAllhan
@AbdelOveAllhan Год назад
1:21 Where's the "Oil can"? 😉
@KombiGarage
@KombiGarage Год назад
🤣
@AbdelOveAllhan
@AbdelOveAllhan Год назад
D.I.Y. cornice break...Bravo!
@AbdelOveAllhan
@AbdelOveAllhan Год назад
4:14 🤣
@AbdelOveAllhan
@AbdelOveAllhan Год назад
Nicely done.
@robertvandervelde60
@robertvandervelde60 Год назад
I have a 67 KG which was 6 volts, in about 1987 I converted the car to 12 volts but left the hooters & starter motor 6v, those two items are still running perfectly today in 2022, the hooters are extremely loud & the starter turns very fast.
@KombiGarage
@KombiGarage Год назад
Good point Robert, that may be why it’s so loud 👍
@birdssurfshed
@birdssurfshed Год назад
Damn fine work!
@KombiGarage
@KombiGarage Год назад
Many thanks 👍
@ericbollinger9321
@ericbollinger9321 Год назад
Thank you,searching through lots of videos trying to find earth for front signals
@stephenpatterson8296
@stephenpatterson8296 Год назад
Just amazingly resourceful! Great work
@philipthemechanic5782
@philipthemechanic5782 Год назад
Cool!
@philipthemechanic5782
@philipthemechanic5782 Год назад
I love your work, you just inspired me
@philipthemechanic5782
@philipthemechanic5782 Год назад
Mistake is the road to perfection, no better ways to learn.
@KombiGarage
@KombiGarage Год назад
Absolutely, cheers 👍
@corkywillis
@corkywillis Год назад
Need to see the seat back
@KombiGarage
@KombiGarage Год назад
Yes, I hope to have that done soon 👍
@SkaterStimm
@SkaterStimm Год назад
nice job
@KombiGarage
@KombiGarage Год назад
Thanks! 👍
@busman5429
@busman5429 2 года назад
Back in 2011 I started working on my 1967 vw bus. I followed your videos they were a great help. Currently the bus is 75% complete.. I ran into serious health issues in July this year 2022 I turned 68 years old. At this point I'm having issues with walking and standing . This year I'm in the process of moving into a new home that is handicap friendly. It has a 3 car garage that I must get set-up where my friend and I can start working on my bus. My VW hobby is the one thing that keeps me positive, adapting and moving forward.
@KombiGarage
@KombiGarage 2 года назад
Thanks Dan, sorry to hear about your health issues. You must be excited about the garage 👍
@Demop_VW_garage
@Demop_VW_garage 2 года назад
Some next level skills there mate😉👍🏽
@KombiGarage
@KombiGarage 2 года назад
Thanks Nick 👍
@vayabroder729
@vayabroder729 2 года назад
That’s some great work and tools!
@KombiGarage
@KombiGarage 2 года назад
😊 Thank you
@KombiGarage
@KombiGarage 2 года назад
Wood versus steel! Who would have thought you can form sheetmetal with wood. Let us know if you have tried this 👍
@hohocc1349
@hohocc1349 2 года назад
Really nice work, well done.
@KombiGarage
@KombiGarage 2 года назад
Thank you 🙂
@backyardkombi5466
@backyardkombi5466 2 года назад
Great work there and nice video
@KombiGarage
@KombiGarage 2 года назад
Thanks fellow VW restorer 👍
@scottmarsh5671
@scottmarsh5671 2 года назад
Yeahhhh boy! My man JoeM is back in the house. I always wondered what happened to this project. Keen to see you back on it 🤙🏼
@KombiGarage
@KombiGarage 2 года назад
Cheers Scott 👍
@customjoe
@customjoe 2 года назад
Mmmmmmmmm
@Demop_VW_garage
@Demop_VW_garage 2 года назад
great job Joe, with that bigger gap good to see you used the copper and place it behind the gap :) Great to see your back on the build mate!!
@paper601
@paper601 2 года назад
Wow! So much work, very brave.
@johnwarfn
@johnwarfn 2 года назад
I love the background sounds. Sounds like it was recorded on the set of King Kong!
@KombiGarage
@KombiGarage 2 года назад
Ha, these are the sounds of where I live, so many different parrots come to visit. It’s a bit of paradise with a nice garage 🙂
@johnwarfn
@johnwarfn 2 года назад
Great work. I would love to see a follow up video of the seat back.
@KombiGarage
@KombiGarage 2 года назад
Yes, I need to get onto that, just planning something different for it.
@Demop_VW_garage
@Demop_VW_garage 2 года назад
I like this a lot :)
@KombiGarage
@KombiGarage 2 года назад
Cheers :)
@pamelanygaard2212
@pamelanygaard2212 2 года назад
You did an outstanding job!! Super impressed! Your video progression was well done too.. much appreciated!