Sold! First off, this is genius! I too have an EOG truck but mine is a flatbed. Currently looking to build a guide for my truck camper and came across your video. Nothing short of impressive! You could sell these if your not already. Dont know how Im doing mine yet.... but you have definitely influenced my thought process.... thank you!
These can work. I usually don't cover them. There are usually multiple holes usually connected. I just put one in each. The fuseless striking ones by Victor are my favorite. Although the destroyers aren't bad.
I've built you version 1 laser alignment and found that DOT C2 reflective tape works remarkably well, even during a sunny day when green line is almost invisible, it lights up when hits the tape very well.
Just what we were thinking of doing. But I think I would need something for my feet instead of them dangling. Nice job though. You also showed me the type of chair we were thinking about.
Thanks for the video guide. The written instructions are…ok. Two things. The “missing” clip isn’t missing. There isn’t supposed to be one in that hole. Don’t know why Weber put a hole there if they didn’t want a fifth clip. Also be careful removing the igniters. The spot welds that hold the mounts are incredibly tiny. One of mine popped off entirely and another one had lifted off one side. I was able to sort of just stick it in there and it worked anyways but just a heads up to anyone else with a grill that might not be as clean as this example.
Brown on a plug maybe a loosely tightened screw causing an arch. My Rv had a loose ground causing the AC which requires a lot of power to operate to not turn on when plugged into Shore power using the plug. The ac would only work using the generator. Step one check the fuses, step two look for Brown spots on the plug. Bingo found browning on the actual female plug and the male connection on the Rv side. Take a part the Rv side of the plug and check for tightness of the screws clamping down on the male pins. Boom the ac now works.
It will be a Huge tree. But also attracts a large number of birds and insects. Recommend for parks and play grounds. Not recommend for house. If you to change position, simply pull this one out with or without roots and plant else. It won't die. If anyone else want to plant it. Select 14-16 feet tall and 3 inch diameter Scion and plant it. It will sprout! In a months time. Small scions can also grow. You can use anti-termite spray if there are termites in the area.
Thank you so much for the video : ) I purchased the GRISUN 7628 Igniter Kit for Genesis 310 and 320 brand on Amazon for $34 and it worked perfectly. I’m a 43 year old woman that hates using tools lol and your video made this so easy for me. I appreciate you showing us to test the sparks and flame before putting it back together. Thanks again.
Quick tip, buddy has a 2015 f150, doors are starting to corrode in the typical areas they do when they're steel. Spray the cavities. I was shocked too.
I got my parts and made modifications to make the laser mount removable. I used a Bull Accessories anchor p# 3000. A 1/4” pipe strap. A 10-24 1/2” screw and nut and a piece of rubber. Lined the strap with the rubber and bent it around the anchor. Screwed in the mount Charlie recommended. Holds pretty solid when tightened down. Still allows for some adjustments. Wish I could add the pic.
This is ridiculously genius. Wow. Since this was 4 years ago, wondering if someone patented this and is selling it now. If so, hopefully it is Mr. Coushaine.
If you buy a variable flow pump would this not add any benefit over that? Seems like this converts an on/off pump to a variable flow pump but please correct me if I misunderstood.