I built that same Ramsey transmitter many years ago and played Christmas music for my neighbors while they decorated their houses. The transmitter has great fidelity as long as you keep it away from switching power supplies. I could pick up the FM signal about 3/4 mile away using the stock antenna.
I don't know why people keep saying Metal Slug 4 is bad I don't think so I liked it it was good and the music was awesome and I like the new character Trevor and the girl 🕹🎮😀👍🏾
In case someone needs it. The configuration of use with the pins in an mvs type mv4f /2f and 6f, is different, only in the audio since it comes in stereo. If you have a harness configured for monaural output and connect it directly to stereo, the effects sound louder. This because if you join (-) speaker + (+) Speaker it happens. For that solution, and the amplifier is not necessary to test it, it is to your speakers to add the ground wire in the negative, with that, problem solved.
The character in the bottom right hand corner selection screen will give your opponent (or the computer) harder puzzles/problems to solve. They will be ;inconvenient' to work out. You must also not pause to look at what you have created - watch the coins dissapear when you have created a chain. This is dead time. Keep moving. There should be absolutely no stopping once the game has started. Think about how you hold the joystick - how much force is necessary to make the character move. It should be a micro movement. No big button taps either. Dont stand still to think, you should have already decided which is your next set of coins whilst the original ones are being stacked or dissapearing.
That is *THE WRONG WAY* you made me cringe so much during this video. There are low-profile CR2032 holders that fit perfectly. Totally perfectly. 18mm pin separation, 20mm cell, 5mm height. Even the pin diameters are exactly perfect for the existing slots. It took awhile to find the right holders... but this is it: *HARWIN S8421-45R* Unfortunately, youtube has been blackholing my posts.... so nobody might ever read this.
Or just buy the CORRECT battery! Replace the battery with one that has tabs soldered on. Buy em on eBay for for a few dollars. They'll last for another decade or two.
1:42 Oh my god! Stop showing us Mad Catz Logo! It makes me don't wanna buy their Light Gun! All Mad Catz Accessories for Sega Dreamcast sucks! But, this Light Gun is really good! Please, don't show us Mad Catz Logo again!
A few suggestions: Use thinner gauge wire (it's easier to work with) and use a chisel-tip soldering iron, usually found on a station. Spend more time removing solder using your braid before trying to pull the old battery. It'll be easier. And use tools so you don't burn your fingers! There's no reason to be holding onto the same piece of metal you're soldering with your fingers an inch away. A proper solder requires that the target metal is hot or you get a cold joint. Solder should flow across it to bond, so you don't want your finger right there.
I talking with a guy that lives in my area, hes selling a 1 cart MVS for 395.00 that im seriously considering which comes with Metal slug. Where do you think i can get a uni bios v3.3?? any info is greatly appreciated.
So with the antenna off you hear weak, unintelligible static at best but when you turn the antenna on you can hear nice, strong, unintelligible static. That about sums it up.
