Vinyl, Cars, Record Collecting, Automotive Repair, VLOGin', Physical Media and Chickens as well as Food and Travel! ♦️♠️Jack of all Channels ♣️♥️ Contact Russ.Shaw@Post.com about #VCLT #VinylCommunity #AutomotiveCommunity #GigLife
When I was the 5/1/24 Foo Fighters gig in Dallas three months ago, it was a great experience for sure. Although we ended up missing Nova Twins due to the traffic on our way to the venue, and when we were in line to pick up some merch, Nova Twins had finished up their set, and after we bought our merch and gone up onto the lawn, Foo Fighters came on stage just in time and they played Bridge Burning, the head banging track, although the song was only played for the first few days of the tour As for the merch, the T-Shirts looked great and there was verity in the diffrent shirts and were well worth the price. Me, my step sister and her freind got the grey Molecule T-Shirts while my stepdad got the Ridiculous Conert Photo shirt and the cobra zip hoddie which looks good as well.
Hey Russ. Thanks for the video. Go hawks! Quick question. I noticed that you and most other videos dont disconnect the return line and use a hose to drain out the remaining ~3-4 quarts of used fluid in the system (after topping it off post-filter change). Any thoughts on whether there is an advantage to draining it all out to get the last ~30% of used fluid out?
Hi Toby 👋 a drain and fill is not a full removal of fluid. The remaining quarts are inside the torque converter. To completely flush the fluid you need a pump like something you would find in a shop. A partial fluid removal is good though because you’re changing the filter and cleaning the magnet. In this video, I should’ve been more mindful of the fact that the magnet was gone from the last fluid change at the dealership. I really should’ve made a stink about that. Anyhow, without a machine that costs well over $1000 you’re not gonna get all the fluid out of the transmission by draining it no matter what you do. Draining the fluid is more to remove dirt, gunk and debris. Transmitter fluids, not like oil it does lubricate, but that’s not its main function. I hope that helps Toby. Glad you enjoyed the video. 👍⚡️🔧
This is why I’m no longer mobile mechanic 😁👍🔧 this was the last automotive gig I did. Mostly work with electricity now as mostly an electrical handyman.
Got a 06 new pump new thermostat mechanic pressure tested the system no leaks and it still overheated after 21 miles of driving with the ac going wasn’t a hot day only 66 outside
Odds, are you have a Error in your cooling system. Did you watch the entire video? At the end, I show you where the bleeder screw is to let the air pressure out
Thankfully there's heaps of great Vegan places in Melbourne, but Life On Mars looks great. I found KEXP from seeing a King Gizz performance. Red Bull provide that invaluable public service over here too 😂
@@benrankins4446 Ben, I think about how many people may have been there and thought, this is awesome 😎 maybe I should get a record player 🤔 I think worldwide venues and King Gizz performances would be an excellent public service 🔊😁🔊
@@shaunspins no sunny day, it was partly cloudy though. I forgot that the mariner stadium has a lid they could close if it did rain and thunder, but it didn’t. It was very loud, but I like it very loud. Very, very loud 🎸😁🎵🎵🎵🔊🔊🔊🔊🔊🔊🔊
Thank you for sharing again and letting me come with Russ! So weird it isn’t SAFECO Field anymore… What are your thoughts on converts at baseball stadiums? It is a weird configuration isn’t it? Great views! Oh wish I was there! And got some of those t-shirts! Wow, amazing they installed seats so clode up to the stage 😲 Oh wow, Pretenders? He he, love the Mariners style Foo Fighterd logo over the stage 😄 Good ol’ nate. Chris Shiflett is my favorite Foo Fighter. Maybe because he was born 6 days before me? 🤔 Nah, he’s just a cool, not focus grabbing, axe man! Thank you Russ. This was awesome!
@@MortenAastad not Safeco anymore. For us both the Mariners and the Seahawks would play in the kingdom. After they tore down the kingdom, they built both of these stadiums. 🏟️ A cell phone company renamed the stadium some years ago, it’s where the Mariners play so I’ll continue to call it “Mariners stadium”. If the Cell phone company wants me to mention the name they’re gonna have to buy add space on my channel! 😤😝 🤔 I think Safeco got bought out by some other behemoth insurance company. That will be the downfall of America. There will be one insurance company, one grocery store, one airline, etc. LOL While the right and the left the red and the blue, the Republicans on the Democrats bicker and argue our countries actually ran by corporations paying off the people who make the rules. 😂😅🫠 Great to hear from you Morten!
@@RussShawTV I was there! The Kingdom was still standing and SAFECO was ready to open 😊 The only stadium corporate name I feel natural to say is Coors Field. Not least because of the brewery being a few miles downs the road in Golden and there being a brewery IN the stadium 😊 I can very much agree with that Russ 😄
My 2017 ford explorer started making a low grinding noise when turning left idk if its the same issues its not that loud but maybe its barely beginning to give out, im barely sitting at 61k miles
Ugh, hopefully it’s not that steering rack. 🤔that was around the first generation time. I would take it to a reputable dealer and see what they say. Some of them are under warranty if it’s under 100,000 miles. Best of luck with that issue, my friend ✌️🔧🙏
It’s mostly fixed. Has a weird electrical problem now. Still trying to get that sorted. I wish we could still get Records for $15 on sale at Walmart here. I’ll have to use the app to scan some records, but I think Walmart is smart. They know people around here are going to Shell out top dollar for Walmart vinyl.
Morten! Yes, I saw Mazzy‘s video. I think he was here the day before I was. I believe that guy who owns the record store in Texas made a video here when he was visiting. Great to hear from you, my friend! Stay Norwegian, my Nodic brother 🇳🇴👍
@@user-fo2vf9cy7t thank you so much! i’m glad the video helped you 🔧⚡️👍Go back to the video and hit that subscribe button right under the video! And why not give it a like 👍 😬
Brought mine home yesterday. 07’ 62,000 miles. I opened the trunk and was shocked when I saw all those wires and tubes. Lol. This video is a lot of help. I’m going to check those cables now. Thanks.
Nice! They are fun cars. Just keep that top lubricated make sure the cables don’t get rerouted and break. I hope you will enjoy your hardtop convertible. We certainly have ours 👍
very interesting noise, Prince the van was making at start of the video. I just kept thinking about painting the van like the Melvan. Hope it works out with new van, seems like the sensors might have done the trick.
Sorry for so many comments LOL buy you are gonna be great man! It'll keep things interesting. On the 62te there is a kickdown clutch from 4 to 3:00 which I believe yours will have that too and sometimes the seals get a little Nick in them that can release pressure when you downshift. So I think that's why mine was fixed with the blue devil
I've had my van for several years now and have the same transmission in it that used to hit limp mode all the time when I bought it and no longer hits limp mode knock on wood
Yes, if there is a engine light, it’s fixable. It’s when you don’t have an engine light that we got worry. Limp mode is usually fixable as these transmissions are very dominantly electronically controlled.
Oh yeah there's two products that I put in mind that make it not hit limp mode too. After changing the fluid and filter put one bottle of trans tune in it and half a bottle of Blue devil transmission seal stop leak
Yeah, sometimes the blue devil can help swell the seals if there’s a leak. But if there’s an exterior leak, it’s always best to fix that before adding any stop leak technology. 👍🔧😁
@@CHEAPROLLIN I thought that too. I did one transmission service on it with the correct fluid ATF +4 I took it down to my friends at the transmission shop and have it serviced again.
@@RussShawTV heck yeah I am thinking of putting a cooler on mine. My van would limp mode if I was coming to a stop. I was able to keep the from limping if I held a tiny bit of throttle while coming to stop. I finally believe it was the drum seal / debris. The 4 to 3 seals go bad. So if yours had the same problem I imagine it would be at highway speeds coming to a stop when it kicks down from 4 to 3rd and it would cause limp mode. Luckily the Blue devil fixed it for me
I have videos on this I think they said 90% of the reasons why these the ants hit limp mode is not transmission internal related. Mine is a 62te transmission I imagine you probably have the 41te which is very similar if you have a slap shifting you can use that and keep it in like 5 and it will not hit limp mode that way too
I watch all other videos how to install backup camera for 2001 model. You are the only one showed how to remove the lift gate rear garnish. Awesome vid. Thank you
Thank you I’m glad you enjoyed the video. Yes I saw that too. That’s why I wanted to spend some extra time there. Thanks for commenting, hope all is well with you and yours 👍🔧😁
use brake clean i usually hit the valve body a couple good squirts let it dry a little before i put pan back on. it has to be clean as possible any little thing could give you trouble later
The older I get the more I get into Hank, Merle, Johnny, Waylon, Johnny, Buck, George, Willie., Tammy, Patsy & Dolly. I never used to have the time of day for country in the 90's. I don't like Jelly Roll's music but I like what he had to say regarding drug addiction. Australia has a similar conservative attitude unfortunately. Hope you're well mate. Cheers...Ben
@@benrankins4446 I didn’t have the time of day for country music at all for a long time. A lot of it had to do with issues with my dad, that being the only kind of music he liked. As I get older, and dealt with my dad stuff. Yeah I like some of that old stuff too. ✌️ hope all is well with you too, my friend.
@@XAVIAXZEO LOL 😂 can be great in some cases, but I could see if you have a white or a black one how people could slow down when you’re in a hurry. ✌️ thanks for commenting.
Thanks Mang 🔧👍super ez! I think it would be cool if we could put air shocks back there 😁 We got a trailer hitch that scraps when theres a load in the back. And it would be fun to make it look like a HotWheel 😊🔧
Richie! In the cool Cousy I was drinking Miller light too! Something about that stuff brings out the country! Buck Owens and Miller Haggard sounds like a great couple of partners on a six pack of Miller light! 🤠 Hope all is well with you, in SoCal my friend ✌️
Thanks for the video. It was very helpful. And important detail id like to add. Early Elements 03-06 had their seatbelts mount on the door right on that grey pannel trim piece you removed at 2:09 . That being the case you might need an extra tool to get the seat belt off if one was so inclinded. A decent sized adjustable wrench would probably do it. The bolt was pretty big. I got my glass from an 05 in a junk yard and i didnt have the tool with me so i was able to kind of slide the trim piece down the seat belt and go about my buisness. I dont know how safe for the trim it was but it seemed fine. Additionaly on my car I was able to remove and replace that same silver trim without monkeying with any of the screws on the door. When you fit it back together you should be mindful of the rubber all the way down on the door jam facing the front seat. I had to pry it from being pinch between the pannels with a screw driver (a pannel tool would have worked the same) when I reassembled everything. Bonus because I got my glass at the junk yard I didnt have to swap the hard wear that held it to the car. Made the job go alot faster. One last nugget of wisdom. Anyone going to the junk yard for the first time the whole lot is covered with goo and oil so if your careful you might be fine but i would suggest wearing a pair of kicks you dont mind getting dirty. I saved my self some nasty cuts thanks to your insistence on the gloves. Something I definitely would have skipped otherwise. Thanks for the cautionary tale and detailed instructions.
Thank you so much for the input! I’m sure it will help some other folks out there doing this job. I’m glad you enjoyed the video and found it helpful. And thank you so much for your contribution here in the comments. ✌️🙏 😅
Hiya Russ! Thank you for doing this. A wonderful entry, so appreciative of you incorporating not only your own Norwegian heritage, but showing what you did from Seattle. My half brothers father was trying to get his then family over to Seattle, but his brother who was in the RNAF crashed and died in his fighterplane and he didn’t want to then leave his parents and he got promoted to chief engineer… something like that. Anyhow, I wouldn’t have existed so… And if MY grandfather had stayed in Montana, I wouldn’t have either so… Some hints of America in my life, somehow. And Gregg, a very worthy Norwegian entey there for sure. Surprised no ones come up with the two ladies who both sang in an american west coast band, one replacing the other, of Norwegian descent yet… Anyhow, thank you for doing this Russ. As always, great video and best of luck 😊 Go Mariners! Who, unlike the Red Sox, Morten has seen!
Thanks Mortan! And I’m glad America did not cause you to not exist. 🇳🇴😁👍 Thanks for encouraging me to make it, I really enjoyed making it. Lots of great memories with my family, grandparents in Ballard.
Thanks for commenting Chad. It’s definitely hard to find a reputable shop that won’t screw you over. But I thank you for your service and helping people with their cars and trucks. It’s very important and you have served well, my friend. 🔧🫡🔧✌️
@@gunnarMyTube i’m glad you enjoyed the video and it helped. Cool name! Our three-legged golden lab was named Gunner. he passed away a few years ago at 15 years old
These cars are known for loose spark plugs check that before you waste a lot of money when the plug is loose that is where the Whistling noise comes from compression from the motor
Plugs loose is not where the whistling is coming from. there’s a whole playlist on this issue. It’s the valve cover. Lincoln, the description and the end screen.
I've spent like a hundred fifty dollars on valve cover and vacuum hoses wasted my money the same problem Whistling noise before you waste your money check the spark plugs number 1 and 2 cylinder loose tightened up noise went away
I will tell you guys out there these cars are known for the spark plugs to come loose when that happens they lose compression that's where the Whistling noise comes in make sure your spark plugs are tight before you break the bank I had one spark plug loose like to drove me crazy
@@juniorbentley1985 they are that’s true, but this is a pretty common problem with the valve cover bladder pressure thing. Cars are pieces of crap. I would agree with you!
I like aeroflex, and buy blades by the shit-ton offa Chinese internets. They do great on grass, but if you get near brick or concrete or chain link, it really eats the shit outta them
@@ilovejapanesemusic3858 love me some Collective Soul! 🎶 “So plant a little seed, soon it starts growing Shed a little light, then we'll be glowing Hear a little tune, then we'll start singing Give a little love, then love will start breathing Breathe a little love Breathe a little love Now I'm gonna breathe Now I'm gonna breathe Come on now, people, come on now, breathe Come on now, people, come on now, breathe Come on now, people, come on now, breathe Come on now, people, come on now, breathe” - Breathe