One question for those who own this speaker new and had to do this replacement , did you ever you the usb 5v charger port ? Just curious I only used it twice the whole life of the battery hehe should’ve charge more devices
Tukar minyak hitam+filter smua dlm 180. Tahun ke 7 getah2 area arms & enjin mula kena tukar. Tahun ke 10 gasket2 enjin kena tukar. Which is standard use wear and tear punya period dah tu. Selain tu semua ok. Xde ragam or rosak yg pelik2. Pada sy kos penjagaan agak moderate sbb alhamdulilah kereta xde masalah spi sekarang masuk tahun ke 11.
we have a pair of these to link together, your video made it possible to keep my speaker instead of succumbing to the normal temptation to throw it away!!!! The tool to pry the skin off is worth it, the rest in the bag are totally worthless except to lift the tabs while you turn the end cap off.
I found a mixture of miniature flat head screw driver bits and a small amount of blue tack to hold said bits in place, enabled me to raise the tabs enough while I twisted the baffle anti clockwise and was able to remove it without snapping the tabs :-)
Thank you so much for this video, some of the other videos iv seen aint worth half a fart , but this is straight to the point, once again thank you so much
Great vid....worked for me! Although the screwdrivers that come with the battery are relatively useless. Thankfully, I have a very good Phillips with interchangeable heads. The smallest one worked much better...more positive fit on those small Philips headed screws.
Fixed mine! It was clipping and not holding charge. New battery from Amazon and this video helped. The radiator was a pain to get off. Took around 20 minutes of twisting back and forward. I also did not break the two latches :) Thanks! P.S. Seems like you need to fix your ant problem..... ;)
Can anybody recommend a good battery? ... I bought a Durapro 6200mah battery, but in reality it has very short battery life. Have any of you found a battery of the same quality as the original? Or at least better than the lousy Durapro!
You just have to pay attention because it has two plastic latches to lift up, then just turn the radiator anti-clockwise I'll be hard to move but no worry
I have the same problems to change the passive radiator, what I used was a lot of flat screwdrivers, so i put 1 or 2 on each flat space aroud the radiator to separate the base of the radiator. I never twisted the radiator because it was really hard attached and i don't want to force anything.
I messed it up right from the get go because I didn't realize there were clips that need to slide out so i broke the grille right off. I wish you had shown that in the video. You skimmed that part pretty quickly.
I’ve broken 1 of the tab too & I should’ve let that part of the video in this clip as to remind others. But mine doesn’t matter much after it was resembled. It still hold it up tightly.
Where goes the 4 sticky foam? I am guessing around the battery so you don’t hear it vibrating while music is playing..I’ve been fixing iphones for at least 7 years, never broke anything but i just Broke 3 out of 4 tabs 🥲
Thank you for the great video. I just did mine last night and there were a few differences in the Charge 3 in the vid and my Charge 3 (2016 model). Mine was advertised as "waterproof" and not sure if the red one was a different year model or what -- that could account for the different screws, tightness of the screws, and the waterproof gasket on my battery compartment. 01:43 The case on mine is not held by a screw. Both sides of the case are held by clips. You'll need a more robust tool than what is shown here -- like a plastic "chisel" you scrape automotive gaskets off with. 02:35 Screws!! OMG, the ones shown in the vid are silver. Mine were black, and they were EXTREMELY difficult to unscrew. Tight. Mine were all phillips screws. I was using a precision screwdriver kit. I ended up having to use pliers to twist the handle of the screwdriver to break loose the screws. One, I couldn't get out and it stripped so I had to break that tab off. ALL of the screws all the way down to the battery compartment will just as difficult to break loose. YMMV. 03:46 Shows three tabs. Mine had one. You have to pry it loose with something flat. 06:11 My battery case was clear and has a waterproof gasket under it. 06:54 My end piece had one screw that needed to come out. Then, there are two tabs -- take a small flathead screwdriver and wedge them beneath both of the tabs, then turn counter clockwise. It will come right off.
Yup i did & I should’ve showed that part in the clip so that others would aware of it too. Luckily the broken tab didn’t matter much after it was resembled.
