I like 5s idk why

I love the build bro🤙🚀✈️

It inspired me and finaly ive build a 95mm 2s Walksnail. Flies nice but 7000kv feels underpowered . Dry weigth is 56 grams.

I'm doing a similar build, but with 1204 6500kv motors. I have the 85x 4k tarsier canopy, and a tarsier v2, but I'm putting it all on a 95x frame. I'm hoping the bigger prop will carry the tarsier a lot better than the 2" props. And I plan on running 3s.

Brilliant job! Love the subject filmed and the stability and flow of your flight is really impressive. I have one of these and now I realise what can be achieved with the correct skill level. Thanks! 🙂

its a dump question but does this frame ( 85x ) handle 2.5 in , emax tri blade props ?

the pass by was fast.Great video n you got a new sub!

what camera is this

are the screw mounting holes are same for the 0802 and 1103 motors for the same 85mm frame?

Hey BGUFF ! Any idea if the Nameless 12 amp aio board will fit the Beta 85 frame ok ? Also, It comes with pins that go out to the side rather than straight down, so it might be a tight one ...

What amp ESC’s did it have. The 5’s scare me on 2s. Thoughts thanks

I don’t get the point of the floss?

did you use the Carbon brace?

really awsome buld :) i have 85 pro 2 and the video of this build really had me stoked on doing the same thing :))) just wondering what is the affect on the p/w ration and on the flight time compared to the 85

Crossfire?

This is amazing

Thank you! See you all next year!

to bad the link to the motors is down :-( any chance you remember them ? would be very nice. thanks and happy flying!

Nice video my friend.👍 I have some spare "se0802 16000kv" motors from my Mobula7, I was thinking to do somthing simimar. 85mm frame, with the CrazybeeX f4 V2.2 fc what do you think? Thank you!🙂

Any updates on this build? Really lookin for either a 85mm or 95mm backyard basher

Hello there. I made a drone with this frame and ex1103 6000kv motor. Well, is 3s 300mah 30 / 60c lipo suitable for this? I also have 2 pcs for happmodel mobula 7. Is it possible that using these batteries will damage the lipo's?

BGuff... looking forward to more of your content. We miss ya bro!

Yup I’m getting me one ! This is how I like to fly

I'm considering to build one with Happymodell 1103 8500kv and GNB 3S 550mah.... What do you think about it?

Nice, I will be doing a similar build soon. It will be heavier, but inspired by this video. Good work.

Nice fly mate what battery connector you are using? Thanks

My 75mm 2s ，Yaw washout often appears, do you know how to solve it?

What motor? 1102 10000kv? 1103?

Hey there. Nice flying! How are recording your DVR?

Thanks for the full build description. Nice project.

Ohhh it's the whoop guy!

build video pleaseeee!)

Which version of betaflight?

What's the hd camera as the link doesn't work, and how could I make my 1306 3" better it's around the 250g with a 4s 900 I think. I was looking at 1408 motors what should I get

Do you prefer the HM 1102 10000kv or these betafpv 1103 11000kv? Which one has more power?

Thanks for your video! You made me choose the UZ85 (with the 1102s) over the beta85 pro 2.

a question brother the happi model 13500kv motors that come for 2s with the fc of beta 85 2 pro there is a problem there is

Hello friends I have the beta 85 2 pro I bought the camera c01 pro and when I mount it to the beta it goes crazy and I buy. another pro c01 i as you want, follow the problem that could be

it takes away a lot of strength

Hello friends I put the camera c01pro ami beta 85 2 pro and it makes me slow

those two brass mmcx plugs can be desoldered and antennas directlly soldered for an additional couple grams

any updates on this? I just did this to one of my air units and I hope you have more videos or even information on the way!

Had one for a week before I (Somehow) manager to burn up the FC/ESC (replacement ordered) (I think the air temp was too warm - and was learning how to do rolls and power loops)

🔥🔥🔥 looks so snappy and poppy

Can you do a video on this build/parts? Really love the color scheme and surprises that 2S can power an Air Unit.

Killer man!! Such smoothness.

Dig it. Thanks for posting your rates and pids. Great flight.

Sad I'm missing IGOW for the second time.. Looking forward to the vids though

Hey Brenden - Welcome Back for Season 2 of IGOW! Really glad you decided to play again! The HD whoop looks sweet! I am excited to see your submissions again this season.

Very cool Brenden :) Didn't know that you had a Third gen Camaro, that's super Cool! Seems like their will be a handful of DJI Whoops on IGOW 2.