$120 Ebay Turbo Motorbike - Part 2 

Definitely need an update when tuned with some ride footage. I want to see how it runs. Looks great.

Virginia sounds like Stan's sister Shelly from South Park. I just want to hear her say "Now I'm going to go listen to my Brittany Spears records" 🤣

Fab work has come such a long way bud good work. This things needs a heat shield and the foot pegs kicked out like an inch and it will be a lot more comfortable and safe to ride. The exhaust is going to get someone real good the way it is lol.

cuts off 1/4" "thats alot" shes a keeper bro

It did come out cool, interested for sure to see the tuning side as well! Nice job for before work lol

Love your content Kyle! If you want a "more straight" cut slow down the saw drop. Less pressure on the blade with allow it less opportunity to flex to the side....

Hey boosted lifestyle, I hope ya see this. I'm thinking about doing a turbo on my buell and I'm curious how fueling is going to work on your build. The fuel pressure regulator on the Buell's is located in the "tank" (inside the frame in the fuel pump hanger) so installing a 1:1 would be a PITA. I'm wondering if I could just use the existing MAP sensor and increase fuel pressure with my tuning software under higher manifold pressure vs. mechanically increasing the pressure with a regulator.

I’m stoked to see how this turns out. I’ve had an eBay gt15 turbo setup in a box for over a year. Maybe this series will force me to do cool stuff too.

If the corona doesn't kill Tokyo a boosted life style wide open throttle up grade will haha. Wicked work like usual.

You’re making this look easy. Good job

love ya work mate when i turbo my harley did little charge pipe like that but it pulsated when under boost so made intercooler on other side used that as my plenum volume and man did it come alive and smooth under boost keep up the crazy builds

This is the ONLY channel that I will watch a long video the whole way through!!

For real though that looks sweet I like the exhaust pipe or downpipe whatever it is it looks cool

Oooh, I love that little bit of turbo whine with that exhaust! Sounds like power!

I use a $20 hot plate from can tire to preheat all.my cast stuff. Works good. Turn it on, throw the piece on it while you set the rest up, then weld.

I'm doing a XL1200C front pipe only k03 turbo. Deliberate turbo lag. Harleys are beast anyway.

Where's the update and possibly a ride video with some dyno numbers????

Put exhaust heat wrap on it! It will looks better on it as well and it will protect you and put a turbo heat shield as well.

Finally a respectful photo

I used to have a bike with ape hangers that tall so I can ride around the neighborhood tripping low flying birds . I loved them

Where is the "what dah faq " clip from? Hilarious

My dude is FABtastic. Hey V, hope your foot gets better. Stay warm up there guys.

if you polisch up the manifold and downpipe the colouring will start all over again, and you get that nice even colour!

Good trick I learnt that they use to straighten a diff housing you've warped after welding on new brackets is to weld the opposite side of the pipe to warp it back true :)

Do a ghostbuster sign burn out on the shop floor! Lol good job on the build buddy

Keep up the good work hey do you know knick fron Knicks garage in Quebec I think

'Expert and a professional" Dry humor...gonna check out her links.

This channel is so badass! I mean where else you gonna go to get a guy who sings while helds and then quotes Shakespeare?😂👌 Love you, homie.

Congrats on moving! This winter should be epic 💰🔥💪😎

Other than me, Tokyo and Virginia, who wants more shirtless Kyle?

There’s a lil screw with a finger grip knob on it that is next to the throttle that you can tighten an loosen for warm up process if it’s left a lil tight your throttle will hang up

That looks sick! Like a working sema bike

Was there ever a part 3? I’m curious to see a test ride

FYI. Use Lysol toilet bowl blue gel cleaner on that stainless. It will make it look amazing. Do it at a car wash. Wear gloves 😉

I was so stoked when you got on because I figured ya boy was doing a test burner 😭😭😭

Hello, I just saw your video about the shadow with the turbo, I am preparing a vtx 1800 to put a turbo on it and I would like to know how you solved the problem with the gasoline system and if your motorcycle has continued to work perfectly. Thank you

The “what da fuck” gets me every time ✌️

You might've should've put a double slip joint instead of the Vband for the header pipe because of the SS pipe growth with heat. It might be a bit of stress on the head flanges.

I’d love to see this finished up

Fyi industrial maintenance mechanic, instead of shielding gas, compressed air works fine.

Seems like the bike is stalling because the turbo is still spinning and forcing air into the carb, leaning out the mixture? Bike idles fine and has good throttle response, but stalls out during what would be deceleration. The only experience I have with turbos is from watching your channel and a few others but it seems like a lean condition imo. Good luck!

With those ape hangers it wouldn't be hard to raise the tank and then you could run that charge pipe under the side of the tank??

cool project, what turbo is that? do you have a link turbo on ebay?

hey mate amazing video. no need for intercooler? im thinking about turboing my Motorcycle too, also a 750cc Honda :) cheers thank you for the video

If you decide to sell the quad turbo honda id buy it

Interested in more information. Any updates on this? What did you do about fuel? Tuning? Etcetera.

dude you might want speed the blade up slow down the travel and move the gard in tighter to the peice so you will get a straighter cut with the saw

Lol that’s Alberta for ya. Lower BC is just pissn rain 😥

Two words.... Heat... Shields... probably want a heat shield for that exhaust pipe. Thank me later !

We need to know whats going on with this project! I so wanna build one for myself too.

wil this work on stock internals? how about the added heat in the oil from the turbo? looking into doing this project on my bike soon!

Next video im turbo charging my lawnmower lol push mower at that or now i guess it would be the snow blower

Man I’m super late to this video but I need one of these! I’m in Newfoundland how much for one!

It sounds amazing but aren’t u worried the pipe is gonna burn your leg?

Jesus! Kyle, put a shirt on! There's children in the house

Your civic example will show that single pipe feeding is fine.

Black heat wrap would look good plus protect that leg a little.

Awesome! I love it.

You should get a snowmobile and twin turbo it lol

Doctor Boost, PhD.

Have you modified the carb for blowthrough yet cuz I think I missed that part

Need an update on this bike please? Would love to see it tuned and doing some rides.

Snow...... Send it!!!!!!

Have you done a Ford f100 240-300 6 turbo ?

THE TURBO DOCTOR!

Those Turbos are like €120,- in Europe apart from the €500 shipping

Turbo doctor is on it..

Sounds good imagine after the tune 😁🤘

Is there an update on this bike? How much power does it make?

Sill 100*F in AZ....enjoy.

Was this project disbanded? Big bummer if so

Next video riding my turbo motorcycle in snow using scramble 😜🔥

Where is F.P.R. fuel pressure regulator???Without this and ECU programmed its not possible to work at all, you forgot many extras i think

Where'd you get the tiny turbo for your project?

apart from the steering thingy i think it is a really cool bike

He said wack on it lol

There has to be an update on this after 2 years! hate to go to this extent but PLEASE!

Please tell me you have this finished, tuned and an update video

I appreciate your info. Wayy cool

Gotta tell you I'm not a fan of the filler music. But will ignore it as best as I can. Really interested in the content. Very cool. No snow yet here in Cottage Country Ontario. But it's coming!!

Sir I’m gonna need to purchase a pre made kit off of you

"Key-on"-o Revs

All i can say is, nice👌👌

I would ceramic coat all the hot pipes.

Any more content coming for the bike hope so

Hello there, Is it possible to install turbocharger in honda xr200?

When is the next video on the turbo bike

Where did the clutch cable come from?

Is this a vz21 turbo that is on the bike ?

Dude is using industrial ss fittings instead of thin wall pipe. I understand why though. It's way easier to weld.

Yay turbos

Having your wife i n there was so fun. Keep her in there more!

Any update to this bike project?

Where did u get the cable I can’t find any

Any updates to your set up

Was there ever an update?

WHERE IS THE UPDATE AND RIDE!

Need an update on this thing

Hy bro good job but your Safty point missing

How much HP did this add to the bike?