No video :(

$19 Air Fuel Ratio Gauge Kit Install | Turbo Honda Civic (Narrowband)

Подписаться 9 тыс.

Просмотров 39 тыс.

50% 1

In this video, we install a $19 narrowband air-fuel ration gauge purchase on AliExpress.
we show the installation process and test the kit before comparing it to an Innovative Motorsports wideband installed in the same car. (Turbo Honda Civic EK)
We also unbox and review this product
These exact AFR Guage Kits are available on eBay, Amazon and Aliexpress.
Product Links (affiliate)
AFR Guage Kit
eBay- ebay.us/xPykQ0
Amazon- amzn.to/3xUkYr6
AliExpress- s.click.aliexpress.com/e/_AeeHLR
Connectors/Plugs
Amazon- amzn.to/3xOG615
AliExpress- s.click.aliexpress.com/e/_9GWn7r
Crimping Tool
Amazon- amzn.to/3b1dfOZ
eBay- ebay.us/5raMbI
AliExpress- s.click.aliexpress.com/e/_AFiI8H
Online Honda Repair Manual - shrsl.com/40flk
22% OFF Any Manual - At Checkout Use Code: RISINGBOOST22
Affiliate link to helpful online repair manuals from eManualOnline
1998 RHD Honda Civic EK Hatch.
Full Parts List
Greddy Style (eBay) Turbo Manifold & T04E 0.50AR Turbo (Too Big)
440cc Bosch Injectors & Walbro 255L Fuel Pump.
Stand Alone ECU (Dictator Standard) (RSA)
Stock D15Z4 Block / D16Z6 Head / P2P Intake
63mm Custom Charge Pipes / Universal Intercooler (Small 20cm)
Xcell BOV / Internal Westgate 0.5 Bar
eBay Adjustable Cam Gear / 63mm Custom Downpipe & Exhaust.

Опубликовано:

11 фев 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 106

@nolimit12 2 года назад

Thank you again Rising Boost for quality content (AFR). Keep safe brother!!

@RisingBoostYT 2 года назад

Thanks, will do!

@imax1445 2 года назад

Thank you for review.

@RisingBoostYT 2 года назад

Glad it was helpful!

@imax1445 2 года назад

@@RisingBoostYT if better than,can you provide how to set up with current plug O2

@patrickcaldart8103 11 месяцев назад

Super explication, merci 👍

@RisingBoostYT 11 месяцев назад

Glad it was helpful

@florinadrian7957 Год назад

there is only boch sensor the rest are bulsiht and even on bosh you need to find the specific tolerance of each part , after you find the tolerance of each individual part then you can make tuning , all the rest is like running bind !

@RisingBoostYT Год назад

true, $19 is not buying quality... or a bosch sensor. I did buy the innovate wideband and Bosch 4.9 sensor but it was over 10x the price. video on the channel.

@juancamaney3562 9 месяцев назад

Great awesome video 👍. Quick question, is there a o2 narrow band bung on the market? 🤔

@RisingBoostYT 9 месяцев назад

Hi Bro. yes, it is the same as a wideband bung, I went to a exhaust shop asked them to weld in a bung for me, they had stock, later on a swapped in a bosch 4.9 sensor into the same bung.

@mobilebeeler 2 года назад

I would like to see synched footage. Because narrowband usually only reads from 12.0-15.0 and i see that one is ranging all the way into the 10s and even 18s... I guess they could have some sort of voltage diode in the chip inside the afr narrowband gauge... Idk. Im always aem.. Dont even trust innovate. Just aem. But like i said id like to see a side by side comparison. Have u record one and a mate record the other. Hitting record at the same times. Id be interested in buying one for my non tuned daily driver as opposed to my $200 aem wideband for it. Thanks!

@RisingBoostYT 2 года назад

Hi Matt, yes to my understanding the narrowband should not work, not sure if they do "trick" the outputs, but it is possible. the gauge does read from 10.0 to 20.0 AFR "or so it says". the thing that shocked me was the the cruising AFR was about 10.7 to 10.4 on the Innovate wideband and it was the same on the narrowband. sadly I had to remove the narrowband to fit the wideband so I dont have both in the car at the same time. so syncing up is not easy. but I will try and then post a short.

@victorside9411 10 месяцев назад

Buenisimi el video Me comprare esa wideband de aliexpress

@RisingBoostYT 10 месяцев назад

revisa el enlace en la descripción

@keeganxw 2 года назад

Because I’m trusting my setup on a $19 narrowband that has a decimal point at the end.

@RisingBoostYT 2 года назад

Hi Keegan, I tested it so you don't have to, but you are correct, if you refer to your "setup" I assume there is some money spent on it and it's not stock. if the setup is worth more than $200 stay far away from the narrowband.

@santiagovallecilla6601 2 года назад

Saludos, en sus pruebas con banda estrecha, ¿tiene instalado el sensor oem 234-4209 para Toyota chino?

@RisingBoostYT 2 года назад

Hi Santiago. Yes, Chinese manufactured OEM 234-4209 was used (listed as "for Honda")

@flockesempire 11 месяцев назад

I bought myself a project car a few weeks ago, a vw corrado with the 1.8 16V KR engine, since I have no way to check if the K jetronic injection is working right, I might get one of these sensors so I can actually check if its working as it should lol 😅

@RisingBoostYT 11 месяцев назад

Hi bro, very cool car, you may want to get a wideband setup, they about $250 but gives you a more accurate and wider band reading of the air fuel ratio. The cheap gauge does work if you on a budget though

@flockesempire 11 месяцев назад

@@RisingBoostYT hey thanks for the answer! And yes its my dreamcar actually 🤣 I am definitely planning on getting a wideband in the future but right now I am kinda on a budget so I might start out with the narrowband one. Def. planning on getting a high quality one later on tho!

@thescalefactorypl9932 7 месяцев назад

Also a corrado guy here 😆. Looking for something to monitor AFR in my G60 because sometimes it acts strange. But I will get some diy Arduino controller for Bosch lsu4.9 wideband from the get go tho.

@webleck1138 Год назад

Hey brother nice video.. got a question.. i have the same gauge and i want to use it on a motorcycle.. does it work or not? Also I didn’t understand where you connected the green cable

@RisingBoostYT Год назад

Hi bro, the Guage does work, however it works best around 14.7 AFR, if it goes too lean or very rich the gauge not be accurate. Green wire goes to the signal from the sensor. Make sure all negative wires goes directly to battery negative

@jorgepartida9226 2 года назад

Saludos amigo, exelente video, tengo una duda tu conéctate tu marcador al sensor ya independiente , yo compré ese mismo y venía con sensor pero no lo conecte como tú yo lo conecte al sensor horijinal del carro solamente agarre la señal el negro, pero no sé si está Vien asi, el problema es cuando lo prendo marca Vien el voltaje pero después de unos minutos empieza la numeración de voltaje como loca y el de la mescla baja sube yega a tope de verde se apaga vuelve a trabajar y así está, me gustaría pasarte un vídeo para que miraras como se comporta o si ISE algo mal, saludos

@RisingBoostYT 2 года назад

Hola amigo, envíame un video en Instagram - risingboost

@jorgepartida9226 2 года назад

@@RisingBoostYT claro amigo te lo mando para. Ke lo veas su funcionamiento gracias saludos

@devontamaffett8438 2 года назад

Can you show more wiring under the hood

@RisingBoostYT 2 года назад

If you need any help to wire a gauge like the one in the video, just ask, ill advise you.

@tasos209 Год назад

Great videoe mate. How accurate is it if the working ratio is around 12.0-12.5?? Planing to use it on a bike

@RisingBoostYT Год назад

This sensor is less accurate the further away it gets from 14.7, at 12 it is still kinda accurate but I won't trust it for tuning, only to monitor afrs

@tasos209 Год назад

Got it. Might be 0.2 off around there or more? What do you believe by experience?

@RisingBoostYT Год назад

What I noticed is once the afr goes to around 10 it will move around randomly from 8 to 10 almost like the sensor can't read that low so the numbers become random till it goes back to the readable range. Same with if it goes to rich.

@SlickTwigDotWAVfile 10 месяцев назад

@@RisingBoostYTmakes sense, if it’s narrowband, in german it’s literally called “jump sensor” cause outside the very narrow accurate area it just jumps to rich or lean.

@jeromezepeda8878 Год назад

Hi I really like this blog but just 1 question i hope i can have my answer for 02 sensor connection the white 1 can be connected to battery - and the + can connect it to the ignition switch?

@RisingBoostYT Год назад

Hi Jerome, yes this will work, I do recommend using a relay, ignition triggers relay to power 1 white wire to sensor, other white wire goes to battery negative or common ground will also work.

@jeromezepeda8878 Год назад

Thanks you sir that helps me much, more power to you and i am looking forward on your next blog

@anhbillying 2 года назад

Hi guy, i really want to know if it works correctly when comparing the number values it gives to wideband, i don't care if it responds slower than wideband because it only 20$ and to buy a wideband sensor kit in my country is not easy...

@RisingBoostYT 2 года назад

Hi Anh, The readings are accurate when cruising in a steady state, both sensors gave me the same values when I drive 80km/ph. the narrowband is little slow and less sensitive. but the big thing I did notice is the narrow band struggle to read a very rich or very lean ratio. if I make my car run lean the narrowband shows lean but stops being accurate after 17+ air fuel ratio as it keeps giving the same readout even if I make it more lean in the tune. so not great for tuning but better than nothing and also very good to just monitor the AFR. it is accurate if your AFR is near the target 14.7 AFR. I do recommend it for the price.

@anhbillying 2 года назад

@@RisingBoostYT yes!! my aim is to keep my motorcycle running nearby to 14.7, as you say, so i can trust it to work quite correctly if installed correctly, combined with spark plug color review to give the most realistic assessment. The "Dynoracing" brand is from china & i can easy to buy it for cheap price (about 17.5$), i have used through oil temperature gauge, tachometer also from this brand & i found it to work accurately and durable for that price. The information you provided is very helpful for me, thank you very much!

@openmilsim9183 Год назад

@@RisingBoostYT Hmm i have never had any use to Widebands showing very lean anyway. I tune until i se it closing in on lambda 1.0.. As long as you can se if its a lean or rich you can always calibrate the fuel.

@marcv8419 11 месяцев назад

Hello! Which color of cabel did you use from sensor to the gauge?

@RisingBoostYT 11 месяцев назад

Hi bro, in my case it was the black wire from the sensor going to the green wire on the gauge. Grey wire is negative.

@michaelstarr5861 5 месяцев назад

What does work to tune in my carbureted small block Chevy or get it close?

@RisingBoostYT 5 месяцев назад

Hi, for a carb setup yes, i think it will be helpful, its good if you get the AFR close, its just not accurate if its far off from 14.7

@tyronepullan6624 Год назад

do you think i can use any narrowband sensor with this gauge?

@RisingBoostYT Год назад

Hi Tyrone, I think so yes, any 4 wire narrowband sensor should work, the Guage only wants the 0v to 1v output to give a reading. The older 1 or 2 wire sensors will probably not work.

@antreasantoniou9522 5 месяцев назад

hello sir can you tell me the aem work better or other cheap afr gauge can working ok also because think buy and dont know what the best buy for safe and correct show thank you

@RisingBoostYT 5 месяцев назад

AEM is much better, the cheap gauge use a narrow band sensor so its only accurate near 14.7. The AEM is always accurate and trust worthy, don't rist your setup with a cheap gauge, its only good for getting a indication of afrs

@antreasantoniou9522 5 месяцев назад

@@RisingBoostYT thank you sir for your answer

@orestispappas1613 Год назад

You can use your Lamda also in the same wire . Why you instal another one Lamda

@RisingBoostYT Год назад

Hi, if the stock sensor is the same 0-1v sensor it should work with the gauge, not sure if you can have the wire go to the ecu and gauge at the same time as the smallest voltage drop will affect the readout. my car is a JDM/RSA spec so it did not come with a 02 sensor from factory.

@orestispappas1613 Год назад

@@RisingBoostYT yes . 👍🏻 if its not 0,1 volt then the gauge go burn. 😁

@RisingBoostYT Год назад

@@orestispappas1613 it should not burn, just not read correctly, it will show full lean or full rich, or blink on 20 indicating an error, 1v or even 5v won't burn it unless you connect it wrong and put 12v on the imput.

@ZeuSOfficial01 Год назад

May I know if I could use this gauge paired with a wideband sensor? Thank you brother!

@RisingBoostYT Год назад

Hi Zeus, I do not know for sure, however I do not think so. this gauge uses the narrowband 0v to 1v to give the output, a wideband uses 1v to 5v. I would say No it will not work.

@ZeuSOfficial01 Год назад

@@RisingBoostYT thank you for replying brother, just sold my PLX wideband and I was trying to find something much cheaper that could still monitor my AFR. I don't think this narrowband is good for boosted engines like ours? Any thoughts brother?

@RisingBoostYT Год назад

@@ZeuSOfficial01 just to monitor yes it will work, if it goes lean it will tell you, it just can't tell the difference between a 17 and an 18 AFR, once it goes very lean it becomes inaccurate. but the readings around 14.7 is fairly accurate.

@ZeuSOfficial01 Год назад

@@RisingBoostYT thank you so much brother, stay safe! 🙏🏻

@josephhall6489 Год назад

I bought that cheap guage and when i start car i get a reading of 14.1 then once i start driveing it flashes 10.0 all the time❓❓

@RisingBoostYT Год назад

Hi Joseph, flashing at 10 normally means an error, sensor is too cold to read (must have heater wires connected) or AFR is out of readable range (to rich or lean) or the sensor is not connected (wiring) also the sensor should not share wires with anything else, any resistance in the wiring will cause incorrect readout or the error. connect via relay directly to battery both positive and negative.

@tasos209 Год назад

@@RisingBoostYT thank you. Make sense now. Definitely used a relay. Now seems to calculate AF correctly

@lisakiv8884 Год назад

How many seconds does it take to respond?

@RisingBoostYT Год назад

Less than 1 second, it detects a quick gear change, its fast enough, just slow when compared to a wideband, as the wideband is instant.

@dexter7s847 3 месяца назад

i got oil gauge，water temp and voltage gauge they have 3 wires all is battery 12 v 。can i put them to one fuse tape？for the power

@RisingBoostYT 3 месяца назад

Hi, yes you can. Make sure the source wire is not too thin, earth the gauges well, a good test will be to connect your voltage gauge at the battery directly, then at the "in car" location, make sure there is not a big voltage drop between the reading at the battery and the reading inside the car.

@dexter7s847 3 месяца назад

@@RisingBoostYT thank you i got it :)

@devontamaffett8438 2 года назад

Can u put the grey Wire on the battery as well?

@RisingBoostYT 2 года назад

Hi Devonta, on the sensor, the 2 white wires go to 1 positive and 1 negative. The grey is an earth, so yes, it can go to the negative on the battery. Black go to the sensor signal on the guage. You must however put a relay on the white positive wire or the sensor heater will stay on forever and drain the battery.

@bk06jdm 2 года назад

@@RisingBoostYT What type of relay we need to white positive wire?

@bk06jdm 2 года назад

@@RisingBoostYT And did you run the black signal wire from sensor to gauge directly?

@lamydora457 Год назад

Can you change the backround color?

@RisingBoostYT Год назад

The specific one I have can not no

@raimondhyperburia3855 2 года назад

Will this work with sct x4 for datalog?

@RisingBoostYT 2 года назад

Hi Rainmond, there is no output for data logging from the guage, the sensor is a narrowband, so 0v to 1v output on the black wire. If you can tap into the wire you may be able to datalog the voltage. But no plug and play option.

@raimondhyperburia3855 2 года назад

@@RisingBoostYT yes that what I asking, peoples dataloging to the voltage by custom made wire example as here ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-POIduyJ55xs.html

@raimondhyperburia3855 2 года назад

@@RisingBoostYT I guess its possible then, rather than 200 euros gauge

@RisingBoostYT 2 года назад

The Innovative Motorsport AFR guage kit comes with dedicated outputs for logging directly from the guage. They are around 150 to 160 usd on eBay pre-shipping cost. It also includes the widebband 1v to 5v sensor. It's much better for tuning. I won't recommend using the narrowband setup for tuning.

@raimondhyperburia3855 2 года назад

@@RisingBoostYT there is 50 dolars cheapest wideband

@ekremarslan3270 4 месяца назад

Good day brother, I bought an AFR watch like yours, but we couldn't get it to work properly. There is no brain in my vehicle, so it is not injection-powered. Can you help me?

@RisingBoostYT 4 месяца назад

Hi, it should still work fine, mine is not connected to any ECU, the signal wire from the sensor go directly to the sensor wire on the gauge. also very important is good wiring to the sensor and gauge. use a relay to trigger power to both sensor and gauge, don't just tap into a random wire for 12v or ground. Grounds must be perfect as any voltage drop will affect gauge reading. do not ground to the fuse box pins or share a ground wire with anything else.

@ekremarslan3270 4 месяца назад

@@RisingBoostYT Thank you for your information, we used to try it somehow, but this time, it shows AFR at low speed, it does not show when I press the gas, if I go slow, it shows fine, depending on the gas response, but if I go fast, it remains constant at 20, why does it do this?

@RisingBoostYT 4 месяца назад

@ekremarslan3270 it could be maxed out lean, the narrow band sensors dont read accurate if it is far away from 14.7 so its to far away from that. Perhaps your setup running lean? Did you connect the sensor heater wires?

@ekremarslan3270 4 месяца назад

@@RisingBoostYT I installed it right at the bottom of the manifold, but I know it should be 1 meter after the manifold, maybe that's why it's not reading? All cables are connected but it still stays at 20 at high speed.

@RisingBoostYT 3 месяца назад

Does it just stay it 20 or does 20 flash on the gauge? it wont read if the sensor is cold. (2 white wires are sensor heat element) mine worked fitted directly after the turbo.

@cipriansofineti346 Год назад

Your AFR is very rich

@RisingBoostYT Год назад

Hi Caprian, yes this was filmed before I got the car tuned, was running really rich.

@mat_adam98 28 дней назад

Can i know the wire you put inside car?

@mat_adam98 28 дней назад

Minute 16:36 u make the connector to connect to the meter? I confuse that

@RisingBoostYT 21 день назад

Hi bro, in the car, Red and Yellow connect to 12v +. Black connects to 12v negative. the green wire is the signal from the sensor

@arturo4055 2 года назад

Amigo ambas leen igual ?

@RisingBoostYT 2 года назад

Hola amigo, durante el crucero, sí. se leen muy similares, la banda estrecha es más lenta y menos sensible que la banda ancha. No confiaré en la banda estrecha para autos potenciados o tuning.

@arturo4055 2 года назад

@@RisingBoostYT ok gracias yo cargo una estrecha ya q las de banda ancha son costosas saludos desde Panamá

@RisingBoostYT 2 года назад

Hi Arturo, sí, la banda estrecha es mejor que nada. debería decirle si algo anda mal o si el automóvil está funcionando consistentemente pobre o rico. saludos desde sudafrica

@jasonkeefer1716 9 месяцев назад

A narrowband gauge is just a gimmick. It will oscillate back and forth expressing the waveform of a normally functioning sensor (between .1 and .9 volts, with .45 being stoichiometric). It does this because the catalyst can’t efficiently clear at stoichiometry, Nox being cleared the best under rich and lean conditions, CO at lean, hydrocarbons at stoich which is also the best fuel economy but the worst for Nox. Its is absolutely useless for tuning and pretty much useless for obtaining an accurate AFR. Wideband air/fuel sensors however, can give you precise readings and is really the only way to go.

@RisingBoostYT 9 месяцев назад

Thanks for sharing our knowledge

@bjnopoli Год назад

Doubled in price in 6 months... smh

@RisingBoostYT Год назад

Hi Bj, yeah that sucks, I did notice a sharp increase in prices and shipping costs due to the rona that was going around.

@thatjdmkid8170 9 месяцев назад

I wouldn’t trust it

@RisingBoostYT 9 месяцев назад

also won't trust it on anything that is modified or has some money spent on it.

@dylandesmond Год назад

Well that's super inaccurate....

@RisingBoostYT Год назад

Hy Dylan, the footage at the end is not synced, it was filmed at different times. in terms of accuracy the narrowband does read similar to the wideband while the AFR is near 14.7, however once it starts going very lean or very rich the narrowband starts being inaccurate or random. 10 to 16 AFR looks fairly similar to wideband. however I won't trust it for tuning, only for monitoring AFR's after it is already tuned.