$2,000 Initial Investment Breeding Ball Pythons (What I Would Buy)

Подписаться 68 тыс.

Просмотров 10 тыс.

50% 1

In this video I'll show you the snakes and equipment I would buy if I were to start over breeding ball pythons!
Click here to become a channel member!
/ @chrishardwickanimalad...
Click here to subscribe to my channel!
ru-vid.com...
Here's a link to my Morphmarket store:
www.morphmarket.com/stores/cc...
If you want to send me fan mail you can send it to this address:
Chris Hardwick
83 Desperado Court
Bailey, CO 80421
USA
Check out my Merch! (sweaters, t-shirts, mugs, stickers, leggings, etc...)
teespring.com/stores/chriss-s...
Here's a link to my 'Patreon' account if you want to support my RU-vid channel!
/ chrishardwick
If you are interested in the camera and lighting gear I used to produce these videos here are a few affiliate links below:
Here's a link to my drone: DJI Mavic 2 Pro
amzn.to/2RnxpHc
This is the camera I use to shoot all my videos (Canon 77D):
amzn.to/2EIEzP5
Here's the tripod I use:
amzn.to/2lbEMn1
This is the SD card for the camera:
amzn.to/2KldhCj
Here's the lens I use (Canon EF-S 10-18mm)
amzn.to/30SK8nO
This is my studio lighting:
amzn.to/2HIhoq5
Here are my batteries for my studio lights:
amzn.to/30WtxQ3
Here's the bag I use for my camera gear:
amzn.to/2YYF2Er
“As an Amazon Associate I earn from qualifying purchases.”
RU-vid HACK! Ball Python, Top Python, ኳስ ፓይዘን, كرة بايثون, বল পাইথন, Шаравы Пітон, Топка Python, ဘောလုံးကိုပိုင်တိုင်, 球蟒, 球蟒, Lopta Python, Míč Python, Pilko-Pitono, Pall Python, Pallo Python, Python royal, Μπάλα Πύθων, બોલ પાયથોન, Boul Piton, Kwallan Kwallan, Poepoe Poepoe, כדור פיתון, बॉल पाइथन, bol paithan, Pob Tsuas sej, Bọọlụ Eke, Bola Python, ボールパイソン, Bōrupaison, Python Bal, ಬಾಲ್ ಪೈಥಾನ್, Bāl paithān, Шар Python, Şar Python, កូនពស់ថ្លាន់, kaun psathlan, Umupira Python, 볼 파이썬, bol paisseon, Python ບານ, Python ban, Ball pythonem, Bumba Python, Бол Питон, Bol Piton, Python baolina, Bola Python, ബോൾ പൈത്തൺ, bēāḷ paittaṇ, Python Poro, बॉल पायथन, Bŏla pāyathana, बल पाइथन, Bala pā'ithana, ବଲ୍ ପାଇଥନ୍ |, بال پیتون, توپ پایتون, ਬਾਲ ਪਾਈਥਨ, Bāla pā'īthana, Болл Python, Boll Python, Балл Питхон, Ball Pithon, Bhora Python, بال پٿيون, බෝල පයිතන්, bōla payitan, Lopta Python, Kubadda Python, Python ea bolo, Pitón bola, мяч питон, myach piton!
00:00 Don't forget to SUBSCRIBE! _̴ı̴̴̡̡̡ ̡͌l̡̡̡ ̡͌l̡*̡̡ ̴̡ı̴̴̡ ̡̡͡|̲̲̲͡͡͡ ̲▫̲͡ ̲̲̲͡͡π̲̲͡͡ ̲̲͡▫̲̲͡͡ ̲|̡̡̡ ̡ ̴̡ı̴̡̡ ̡͌l̡̡̡̡.__
10:00 Don't forget to SUBSCRIBE! Thanks for watching! ̴ı̴̴̡̡̡ ̡͌l̡̡̡ ̡͌l̡*̡̡ ̴̡ı̴̴̡ ̡̡͡|̲̲̲͡͡͡ ̲▫̲͡ ̲̲̲͡͡π̲̲͡͡ ̲̲͡▫̲̲͡͡ ̲|̡̡̡ ̡ ̴̡ı̴̡̡ ̡͌l̡̡̡̡.__

Животные

Опубликовано:

25 июл 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 50

@jssmorphs5729 3 года назад

Because of you and Brian I’m addicted to snakes and have bought 5 in the last month just got a banana clown to be my Bobby lol

@scalibound 3 года назад

Pairing a het x het gives you 25%/egg chance at visuals. the problem is the non-visuals will only be possible hets. Selling normals or possible hets is not easy even for established breeders. Granted using a Coral Glow Pinstripe het pied gives them 2 incomplete dominates for chances at something visual that they can sell. A better strategy would be to invest a bit more and get a visual recessive on at least one side of that equation. That way they would improve thier odds (50%/egg), and even a non-visual would be 100% het. Much easier sale or better holdback for their own future breedings. Lots of ways to approach this. Overall good advice and definately gets them a great 1st year start for about $2k.

@mrmouse-ol9pw Год назад

Videos like this make me wish u came back brother. U were the best..hands down. Even that last question, you took a question most of us know the answer to and threw in some stuff some may not. Hope ur ok

@Ibaneddie76 3 года назад

Hey Chris you do a really great job on these videos man, I know it must be difficult tying to keep people interested in one subject every single day but you have it down. Keep up the good work!

@KayBeeStew 3 года назад

Love your channel! Wish I'd seen this video before I started 2 years ago!! Still got some great tips and tricks just now and will implement ASAP. Thanks so much!!

@allenstone8936 3 года назад

Thank you so much for answering my question. I enjoy the information and content you put out

@gooddog1700 2 года назад

Loving these videos Chris, so cool to get clear info on a subject I'm super interested in, but still don't know a whole lot about, and there is a lot too it! Nice one

@kevincameron6870 3 года назад

A couple live streams ago I was asking you about my humidity and yesterday I got a full shed literally from nose to tail just amazing to me, Thanks Chris from your Canadian snake geek, and proud of it lol thanks for your knowledge and everything you do for us.

@jamfamreptiles1286 3 года назад

Perfect topic, I seriously was thinking of getting your opinion.

@rodentnightmaremorphs3516 3 года назад

Great video Chris!!!!! Thank you!!! Im currently stuck debating future projects once remodel is complete!!

@zenknitter9103 3 года назад

I’m following your suggestions, thank you so much!! Ordered a 4 level rack from ARS CAGES because of your site, and the powerhouse cage designer here in California doesn’t show ability to add as you’re able!!! Sold me. Connecting with sellers for adult breeders. Leaves time for my current 5 to mature. Thank you for such wonderful advice, and your transparency! You are my ball python hero.

@Local_Reptiles 3 года назад

Solid advice, thank you!

@okletsgo1905 2 года назад

Great videos, keep posting

@SilentC90 3 года назад

Great vid!!

@madwolf8399 3 года назад

I've invested in a subadult female that should be ready next year and some males that should be ready to breed next year as well supers and some dominant genes and a couple hets mixed into the snakes

@fantasyskeep Год назад

Chris, what do you think of InkBird Thermostats?

@jamesfrederick. 3 года назад

What would you do with three grand that what’s I plan to spend I think supers or already full recessives because that way you’re going to never have normals

@crazyaboutreptiles8833 3 года назад

You should know you don't need all the other stuff I got a male pin pied $450 female het pied $140 grown craigslist and I'm using 20 to 40gal breeder Enclosures from pet co on sale $1 a gal or on craigslist for cheap to I use paper towels on bottom it easy to clean and sanitary and I use overhead lamps with heat bulbs black not red at Walmart $5.98 and lamps I use are the car engine type overhead lamps with those clamps on them they are like $7 at Walmart and like chris said when I'm close to eggs then I'll get my incubator.

@spuds7677 3 года назад

So.. I'm in my 2 season breeding ball pythons. I would not start out with recessive ball pythons. Especially trying to use Hets. You only have a 25% chance to get the visual and thats to say the het is what they say it is. I would get a female or two in the Bel Complex, I would get a male combo in the Bel complex, a Banana male with some sort of other genes and then females that don't cost a lot. Pins, spiders and even normals if you have to. So for 2k, get 2 males and 6 or more females. Make you a rack home depot shelves $90 for 2 and you can house 14 to 16 snakes for just a couple hundred bucks. In the first year you can pop out 30+ eggs and make you a nice profit. I made over 6k my first season and this year I will make more for sure. I have several females that were a bit small last season but will be ready this fall. I should have close to 15 to 20 clutches my 3 season

@apocalyp_tahoe 3 года назад

Chris 1 thing you are forgetting when talking about the ars 7010 rack is the shipping you said each time you get a new snakes you can get another level and it will only cost $120 but shipping generally costs about the same as the price of the level I live 3 hours away from Indianapolis where it says ars caging is at and it costs $112 just for shipping

@helluhmad2099 3 года назад

Also dolls with balls is a great breeder she's dope!!

@680ecks 3 года назад

I built a cheep homemade rack(home depot shelving unit) cost me about $350 then I built a decent homemade 28 qt they are in now for $750 14 tub. Also bought a vision rack to try it was $750 I think 16 short tubs ,Going to use for hatchlings hopefully.

@helluhmad2099 3 года назад

Interesting this is basically what I've been doing 😂

@helluhmad2099 3 года назад

If you have 3k there's a guy on morph market trying to sell his whole collection (15 snake's) mostly pied and other combos I just don't have the money 🤷‍♂️

@quirozgeckos7151 3 года назад

link?

@680ecks 3 года назад

I'm in the long haul part raising hatchlings. Just feeding them and waiting . Very frustrating when they won't eat . My biggest female went off food for three months now she seems on but not my biggest anymore . She was about getting big enough ,1200-1300 grams ,now nothing. Long wait so buy what you like . Feeling the drain ! Just discouraging when you have problems and they arnt growing like you think they should .

@The-ophilus-J 3 года назад

Commenting and liking to help the algo

@nataliesreptiles 3 года назад

Knowing my luck, I'd follow all this awesome.advice and get everything set up and as soon as my girls were gravid, I'd buy an incubator... only to have all my females slug out on me. lol. Hopefully not. Still have another year or 2 before I'll hopefully be joining the breeding game. I'm raising up my beautiful female bp and waiting to find the perfect male for her. But I have a trio of bullsnakes I'm also raising up to breed. Except my "female" I was hoping to breed next year ended up being a male, and my other female is a 2020 hatchling. So gunna be on the lookout for an adult female with the genetics I need. Otherwise I'll be waiting til 2023. But that's okay. I'm enjoying watching my babies grow.

@lidathorn6449 3 года назад

You might as well mention that they'll spend that last $90 on buying feeders.

@tasha_111_ 3 года назад

👏👏👏👏

@lidathorn6449 3 года назад

Don't buy from Remarkaballs! That's where I got my black pastel butter leopard male with hets. Received snake in January, he came in with REALLY bad mites and thank goodness I kept him quarantined cuz I've already got a vet appointment cuz he might be sick with something else causing digestive issues. Pisses me off too cuz I bought him to breed him to multiple females, but if he has something incurable, I'm out several hundred bucks! BE CAREFUL, BUYERS!!! Morphmarket is just a great platform for sellers to move their snakes. It's reputation DOES NOT reflect individual sellers on the site, so buy with caution!

@TheInvisiblePlayer 3 года назад

Love the video, but a het pied is not worth 850. You can get a juvenile or adult pied for 850.

@Chris-cu4ge 3 года назад

Buying ars racks a level at a time really isn’t cost effective once you factor in shipping. For me two levels and a base would be 270 shipping. One level cost 112 to ship.

@ChrisHardwickanimaladventures 3 года назад

Yea, it bites you in the long run with shipping.

@hamhawkgaming6430 3 года назад

Sir, ars charges an ass load for shipping. 400$ in shipping for me. Not the site to mention for a budget in any way.

@deadmanomegagaming4061 3 года назад

There's also the very irritating fact that ARS only seems to ship to the US which doesn't help me out at all, do you know any alternatives?

@timfoil2319 3 года назад

You left out shipping. To Washington shipping would be $372.33 for a 70-10 single level with wheel base. Without the wheel base shipping is $154.55 for just a single level. Don’t get me wrong, I’m team ARS as well. FreedomBreeder is way more expensive not to mention the ridiculous shipping costs and outrageous wait times.

@zenknitter9103 3 года назад

@Tim I just earlier today called ARS, online the shipping was shocking, by phone Jason was able to set my shipping for UPS GROUND, not freight like the online does. Base and 4 levels for now, call them, much better pricing.

@timfoil2319 3 года назад

@@zenknitter9103 interesting. So what was the damage? How much was shipping?

@zenknitter9103 3 года назад

@@timfoil2319 I also upgraded to 8 in heat strips, hi end thermostat and the rolling base came in at about 9 with shipping thru UPS Ground. Shipping via freight was 3+. Hope that helps!!

@samanthawinslett202 3 года назад

Have you ever thought of a fake Bamboo plant in your snake room...lol

@nathanaelpalmer1549 3 года назад

4:00 $850? I paid $175 for a double het pied/clown male who was around 1100 grams! The con to morphmarket is the High prices. But this video should be worth a lot to a new breeder! Keep it up!

@DerricksReptiles 3 года назад

Hardwick ……. I’ll give you a chicken egg, a half eaten piece of bacon and 1 shoelace. And guess what I’ll give you all this for a interview on my channel 🤟🤟🤟🤟🤟 lol seriously can I get 15 to 20 minutes of your time?