$200 Blaster Rebuild | Budget Blaster Rebuild 

Prices on these finally coming back down to earth. Sold all my toys during the price hike. Now it's time to buy again.

That’s why you want to have friends like that , good friends , he has stuff all over the yard , he’s fully committed on this one 😂😂😂😂😂 I laughed so hard

You just taught countless folks how to get up in there. I'm so excited for the 350x !!!

Man that is genius having oil in a soap dispenser. Blew my mind! 21k coming in hot. Amazing video packed with info and good laughs! And I can’t wait for the 350EX build!

Hell ya David! I'm sure the neighbors are luvin ya!! That's a true mechanic rite therrr!! Turned his front yard into his shop just to get his truck done!! Great job on the rebuild of this master blaster!! Ya always do great work bro

I've done so much work on cars crawling around in the muddy snow working out of a little shed. I'm greatful I have a garage now and switched cars for bikes and quads.

25:00 he was spot-on on not using that wrist pin bearing. Those only last about 20 hours before they end up heading out the exhaust. Get a reputable name brand needle bearing from all balls or wiesco if you need a new one

Awesome video. I have that exact same blaster, I believe a 2004. On mine my piston skirt broke in a lot of pieces breaking a piece of my crankcase off. I got I welded and bought a new OEM piston. I’m excited to get my blaster up and running. All I’m waiting for is a oil seal.

Hey, I was the one that commented about memories of my LT80 on the last video. If you get a REALLY clean used LT80 of any year (Preferably a yellow with blue seat one, like my 88 as a kid) post if on the tubes, so I can see. I will most definitely buy it, and either drive the 1000 miles to get it with my son, or have it shipped. He just turned 8 and I'd love to get him into the hobby, I was around the same age when I got my brand new 94 PW80 and 1988 LT80.

Thats the most well packaged rebuild kit ive seen lol😅

Ebay all the way. You and your boy doing a great job. Blaster was black and now white...what... Like that 1 wheel wheelie. Good job guys

gave this a full watch start to finish.. loved it!!!!!!

Fully committed on that truck job 😂😂😂

I love how you did those tires! Lol Blasters are awesome machines.

Awesome Mechanic Wisdom shared...Also your buddy had that whole engine apart on the driveway..That takes some muy grande cahones.

I just got the same blaster, 2004 white with red frame. It’s a beast just won’t idle at all, going to try to drill a new idle screw because previous owner removed the Tors.

I wish I could find one for $200 bad ass can't wait for more blaster videos

Was on a blaster this weekend with a big bore kit and I really enjoyed it .nice find that should sell fast take care guys

Thanks for all the tech tips! Great video!

Just got a nine running blaster for a Chinese pitbike , confident I can get it running

Blaster blaster videos please, love you guys´s videos here in Costa Rica Get up in there!!

"Thats a nice crank, smoke it david"🤣🤣

Enjoy watching your videos man I learn something everytime I watch your channel

Hey guys thanks for the content. I enjoy watching all your videos but this one helped me tremendously because i have a 95 blaster and the top end just went out I ordered the wiseco rebuild kit. I hope that's a good one because I have no idea what the hell I'm doing. Thanks guys keep it up

Nice rebuild video. Digging that new hair do as well!

Nice blaster,she runs good now after getting up in there,love the channel!!

You have to have the torque adapter at a 90 degree angle to achieve proper torque, or use the head length chart to compensate if using it straight on

sweet 1000 times better thats a nice bike

I just got a 01 blaster free I'm watching you fellas to rebuild her and have it screaming once again she striped down and ready for paint now

I need to pick up another blaster! Such a fun little machine

Got my first 2 stroke, all original 89 quadracer 250. It’s be cool to see one on the channel eventually 😎!

I think you are supposed to have the tool at 90 degrees for the torque wrench to be accurate. Thats how it is for the AR barrel nut anyway. Great vid!

With that torque wrench adapter you have to do a calculation. Just setting the torque wrench to the torque spec does not make it correct, with the extra length of the wrench gives more torque and thus that was more than 20 ft pounds.

Those motion pro torque adapters are awesome. Wish I had got mine years ago

Always wanted a blaster when I was younger but my dad hated two strokes. Now I’m Looking for one for my boy. Prices seem to still be jacked found one that looks like a complete turd with spaghetti wiring hanging off it and add says it needs a top end for $600. At $200 this would be a no brained to pick up. Good find and good video my dude.

Keep it Yamaha 💯 boys! 😀 Got me a legendary '11 YFZ450X Bill Ballance (I'm orig owner..quad has only 4hrs on it! It's now fully prepped to race locally). Picked up a '21 Raptor 700R-SE in June. My dream machine. Worried Yamaha may discontinue soon as I've heard rumors. *Btw, both the YFZ450R & Raptor 700R are selling like hot cakes even @ $10k* . - NW Ohio

Yeah I bought one of those reed boots said it was for a blaster but didn’t come plugged off but I bought one of those tach out performance heads that’s a 20cc dome I like it

Get up in there dude!!

The best atv channel there is!

gotta love the simple old two stroke 💙💪

I always learn something, and enjoy watching. Thanks man you are killing it!

Great work! Fun little quads…

Get up in there buddy! Love the vids can’t wait for the X!

Yea ive used a few ebay kits before not bad for the money. Screw amazon lol never use em. Great video bro like always! Stay up in there and be safe

A piece of advice if people don't know is to make sure you have the correct sparkplug in. I had the wrong one in apparently and blew a hole in the piston.

You guys are great love the Channel you do great work so keep on keeping on

Chea dudes. Rebuild knowledge is key when you're hard on the gear. These are the China kits you got that you returned from the video wear buddy forgot to wear both shoes lmao

" if you get real close you might get to take a nap " Hahahahahahaha!

Best video thus far great work time machines best atv content on the interwebs! 🔥

I really like the blasters they really awesome

@timemachines I got a 2002 I'm looking into restoring everything, your videos are definitely the inspiration

"Don't eat this and don't smoke the glue" 😂😂

when i get a blown up quad i put the quad up on the grab bar and power wash the crank out then soak the crank in two stroke.

Up in my neck of the woods. I live about 15 minutes from Decatur Tire

Just bought one just like this Thanks bro

Finally the vid I’ve been waiting for

Blasters are fun

Awesome video! Good information as always. Get in there boys!

Sweet video, I always learn something from you, appreciate it!

Get up in there 🤙🖖

Getting up in there son! Love the rebuild how to s brother

Damm right she's done! Sucks you had to go through that though. Now you know and knowing is half the battle, GI joe!

Get ALL uP ALL thE Way iN THeRE !!!!Repeat this ProceSS!!!!!

I got a rebuilt blaster not too expensive but it runs good the only thing it takes alot of kicks to start, besides that it runs and sounds good

Nice blaster up in there

I just got a 2002 blaster so if I take off the Air box Lid that will help it run better

Thanks for the video. You taught me alot here on this video

Homie got his ears tucked Clean

Parts in the link u gave us really jumped in price..$950 for the top end..

Honda oil in the Yamaha im surprised the poor blaster did not vomit lol 😆 😅 😂 just kidding love your videos have great day

I'm about to do the same thing to my blaster

I'm almost 5k into trying to fix mine. After all that money and found out a few weeks ago, the crank case is cracked and that's been my issue. Only got one to ride with my dad on his blaster. I could've bought 3 blasters with the money I put into mine. Such a mistake.

lol thats some nice crank lol !!!!!

Hell yeah you guys awesome rebuild after the China malfunction that's aggravating big thumbs up y'all👍🏽👍🏽👍🏽👍🏽👍🏽

get up in there skunky funky

Loving the channel guys🤟

Yeah buddy

Awesome dope video my guy !!

I have a Yamaha blaster200 2002 and it won’t stay on in Neutral it starts first kick but just won’t stay on any suggestions please and thank you ?

We just got one for my check. How do I mix the gas on it like what gas cans should I get to mix the two stroke?

So did you turn it upside down to get broken pieces out? Part of my piston broke off and I haven’t found it up too you think if I turn it upside down and do the same it may fall out? It still a good crank I’d hate to break it open to just get that piece

I definitely agree don't use bearings that sound like a maraca LOL

you're over torquing those bolts. if you're using the motion pro adapter thing it needs to be at a 90 degree angle to the wrench. if its straight out like at 29:45 you're adding leverage and throwing off torque specs. just so you know

Haha when you said now You know why I slapped you in the face

cant wait for the 350x

Great content as usual, funny the seller changed price for top end kit to $900 when using that link. Lol smh

Nice I have an 06 blaster

Hows it going! On my blaster it been sitting for almost a year. cleaned the carb and for some reason the gas dont go through the carb. the bowl is dry but gas comes out the tank?

I like your shop, bud -is that closed cell insulation blown in there? How thick did you go? Good vid.

love blasters

Love it !!!

When you were spraying that shit, you should've been playing some Ramones. 🎶. Now I wanna sniff some glue... Now I wanna have something to dooo! 🎶

How to buy Yamaha blaster second sparepart on your garage? I want to buy completely cylinder of Yamaha blaster

Lol at the tire change tutorial.

Of course you had to use blaster on the blaster !

Hey you guys are good with 2 strokes, I need some help

Schaawiiinnnngggg!!!

Nice vid

I had the same thing happen with mine the piston was to big for the cylinder just like that the Chinese top end kits suck.

I weigh 240 pounds and am about 5'8 I was thinking about one of these to rip around the yard, ride trails and ride with my kid with cause they're super cheap to rebuild. I'm considering one of my bikes for trade for one... Contemplating. Do you think I'm a good size for a blaster or too big?