$500 Abandoned Dirt Bike To $1200 Bike!!! (FIXED + TOP SPEED) 

Make sure to checkout my instagram to see behind the scenes: 2_vintage_ New Classifields option on my forum where you can post your bikes, quads, scooters, etc for free: 2vintagerider.com/classifieds/ My Second Channel: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-TPEgjamDX7s.html Thanks to everyone who watches and supports the channel!

Why do so many people hate the man makes a living off of buy fixing and flipping bikes STFU do y'all watch just to hate help or be quiet.. Nice content keep up the good work and vids

Let that thing idle partner. Cold seize acomin.

Just so u know brutha , to bleed brakes...you keep the bleeder nut closed, pump the brakes until it’s gets real stiff and hold the brake pedal down, crack the bleeder nut open until the pressure is gone then close it again. Release the brake pedal. Then pump the brakes up tight again holding brake pedal down (this holds the pressure in the line) then crack the bleeder nut open again. Repeat this until you don’t see any air bubbles coming out. Pumping the brake while the bleeder nut is open just allows air back into the system. We all do things incorrectly at times. No big deal. Just learn as u go. Nothing wrong with that.

14:07 when u have only ridden quads in a while

You need to learn how to properly bleed brakes. That was cringe watching you try and bleed the back break like that

your a very reasonable person,people around here want 2500-3 grand for a filthy,rusty,beat up dirtbike.i would do business with you

All the different bikes you've had on here, and you just now found 6th gear. Lol

you make bleeding brakes way harder than it is....should take about 2 minutes with no water bottle....wish i was closer to show you some tips

Your all putting negative comments yeah he might not have the best knowledge in bikes but fair play to the lad giving it a go and if you don’t like it don’t watch rather then making negative comments and he’s learning as he goes which is the best way to learn keep it up bud well done 👍🏻

13:42 it took me a while to figure out what that sound was

You`ve got to treat your bikes better! People have been saying since like the beginning of your youtube channel. Listen to people godammit, its like you are doing it on purpuse to piss us off...

At 3:48 WTF look at the chain adjuster 😂😂 screwed all the way in

"Let's try to heat that caliper up with some.......some heat"

As a lot of other people have commented, you do some bike maintenance things that are just wrong. Please spend some time watching some videos by qualified people before you do these jobs. You have had some real nice bikes on this channel, but quite often I turn the videos off because you say so many things that are just plain wrong. I know you are young but Please educate yourself and your channel and your bikes will benefit so much.

you need to get an actual brake bleeder that pushes the fluid from the bleeder up into the reservoir and thus eliminates the air and fills the reservoir all in one shot.. it makes it so much easier to do ATV and bike brakes because the pistons arent big enough to really push alot of fluid at one time so it can take forever to fully bleed them so the brake bleeding tool makes it super fast and easy and it doesn't cost much.. the whole kit is like 30 bucks so those people saying if you always buy tools you never put money in your pocket are dumb because at some point you need the proper tools to make the job go alot faster so you can get more work done :) especially with the amount of brakes you fix

Nice video man!!!! Great fix!! nice profit

“Now that the rear brakes work we can try some things!” Leading to the most alkward biggest wheelie fail in RU-vid history 😂

Enjoyed these 3 kx videos got me all pumped I have a 2003 kx 100 with only around 10 hours on it what a shame

👏BRAVO, another great learning moment video. 🤔I did know Kawasaki made a snow bike? Nope, outside a car, 20 mph is my top speed.

Never had a 125 that didn't have 6 gears...love the color blend on the 2 greens.

Nice build man, bike turned out great

That snow shot is sick

I would be embarrassed to make videos about stuff i have no clue about!

i have an exactly same bike. lot of fun. i rebuilt the engine, nice job. chers

Certain things u just need to watch "how to vids" on and get more knowledge on before u attempt to do certain things on your channel....

Love those years with the blue forks.

Don’t rev it like that on the cold start had many motors blow up by doing that

the front vork or stear bar looks crouked.also dont use water to bleed,put some brake fluid in the bottle.

Great job bud. I would’ve came and picked it up if I had the cash for it.

Joe , what app do you use for your top speed runs? there a bunch out there but i like the one that you use. thanks!

I cant wait to I see a 400ex in one these videos.

Nice. I like Kawasaki's i want to get a kx 100

Don’t listen to these guys! They all made similar mistakes trust me! My favorite channel! Why? You but, you fix , you ride! In one episode! Keep it up

Little nicky is at it againnnn.

70mph on a cold motor! That’s what’s insane

So this is basically a cold start.

Six years don't necessarily make a bike faster, it just tightens the gear ratio for faster acceleration. The only thing that makes bikes faster is if you have wide ratio gears or change sprocket sizes.

You should get a 1990 kx 250! They are super nice.

Oh and you missed the chain, it's super slack lol

Not gonna lie dude, I got Forrest Whitaker eye watching you bleed that back brake. Brake fluid is hydroscopic, if you're going to bleed that way use brake fluid in the bottle not water. I had a 93 KX 125 it was good little bike.

I know this is an old video, but dosent the coolant cap look not screwed on all the way.

Hold the throttle full when you kick, and as soon as you hear the engine start just let go, that's how I do it, the choke is fine and all but most of the time I don't even need it, only problem with doing that is when there is a problem with the bike and you end up flooding the crankshaft buuuuut if you know it's fine you can easily just go full throttle and it will start so easily :)

Pump the breaks til stiff with the bleeder CLOSED hold the pedal or lever crack bleeder make full stroke in one direction pumping Fluid and air out. Don’t release pressure from the pedal or lever until you have closed the bleed port

well thats a different way then ive ever seen to bleed a brake.......its easier to pump it up and hold it then crack your bleeder valve letting the air out until you get all fluid.. i dont know how it didnt suck water back up but hell maybe thats a way i should try lol

Love the vids

To properly bleed the brakes you pump up the brakes and hold it then loosen the bleeder bolt. If you pump it whiyl the bleeder is loose it just puts more air in them. Just a little tip.

Enjoy every videos

Your next wheeler should either be a 350 warrior or you should get another rare trick made for ice racing

nice find

You don't really know how to bleed brakes correctly. Hold the pedal down then tighten the bolt. Pump a few times and hold then crack loose... ect.

pump the brake until pedal is hard, hold down pedal then release fluid while still holding pedal

My 95 and 99 yz 125 both have 6 speed transmissions

You sure made out like a bandit on that one, if you were in Oregon you could have easily gotten 3500$ for it. Bikes here are ridiculously expensive and not only that but scarce. I want to enter your monthly contest but I'm not sure how to do it.

Nice I like it

Nice dirt bike

I own a two stroke and when mine needed a top end it made that slapping noise like a piston slap that means it needs a top end and that’s what it sounded like 13:20

A Canada spec cylinder head will fix that right up in both cold and hot wether off 98 octane.Im Australian & Ive got an 02 JP10 (only 10 made per continent) and in Japan the guys in the lab coats decided to just run Canada heads and a few other bits, runs ace in 4 to 45 degrees celcious ( apx 2-110'F) with only ratio adjustmtnts. Had her since new, chews through plugs though regardless of plug color or how its riden. Every 2 rides._. Been like that since she was born.

it is called the master cylinder reservoir.. :)

It's 25° outside it's freezing 🤣🤣🤣 shit that's warm sun

Good to go, perfectly

I would not use water in your bottle put brake fluid in it. Especially with dot4 as it absorbs moisture really bad.

Man. I'm asking u this from the bottom of my heart could you please send me a seat cover for a 1994 ATC 200 please man

How can I get the gas/ speed test thing on my phone to use for my bike plz let me know

Just got a cr 125 today she rips

Is that water in that bottle....holy crap dude,hydroscopic,dude try again with a bottle of break fluid

Back brakes more contaminated than an oil rig

Thats Jimmy Johns fast.

Thats not how you bleed a brake,crack the stem open,push the brake pedal all the way down,hold it,close the bleed valve,let the brake lever come back up,repeat till you see no bubbles.thats a nice kx man

don't rev it when it's cold, let it warm up for a minute or 2

Good video

19:44 to 19:48 What his neighbors here all the time,Also 19:44 to 19:48 the sweet sound.

Definitely have to change at least the segments.

i wouldve bought it for 1500!!! nice bike

Easily a $2000 bike right there

That’s the process of degassing the breaks. A bleed is when you use a syringe and fully bleed the line

1:14 He sounds like me!

Pls buy 1997 or 1998 yz 80

The SNOW IS ALL FROZEN😑

Sounds really lean to me but let’s go top it out lol

All I can say is WTF I can't say nothing else I'm speechless

Is that a kx 5hundo

Why do u put water in the bottle when u bled your back brakes? U dont need to

6 gears that’s crazy 😂

Put some deicer on that patch of ice.

The damage your doing not warming up properly leave the bike tick over with little revs i would never do that in that weather not even over here in britain in summer let it warm and lubricate engine fully and hes tiny piston slap

Sounds so loose like the bearings are shot hihihihih

500$was giving it away 1200$is a steal .2500$would have been my asking

One would think that he would know how to shift gears by now.

My yz 125 had 6 gears

My dad had a YZ 125 that was beating all the 250s and it did 90 mph

Kawi are known for spongy brakes

It's funny cos in Australia thos things are worth about $4000

In FL that would sell for 2000$

Nice

r.i.p bike

Let me bring my bike up to ride with y’all I love 2 hours away

U should buy a raptor 350

Tf, my 125 hit 85👀 is like the 2001 on crack

10 kicks with choke