$600 Dent Repair VS a Cheap Hot Glue Gun

Подписаться 9 млн

Просмотров 1,5 млн

50% 1

Thanks to CarParts.com for sponsoring today’s video. Shop with confidence and find the right parts with their Lifetime Replacement Guarantee here: bit.ly/carpartscomdiyordont2
Dent Repair takes skill, patience and the right tools. or does it? Our host Zach Jobe takes a swing at paintless dent repair using cheap tools and very little experience. meanwhile, we have a professional dent repairman from Never Dent so us how its done. But who's finished product is going to look better? The Pro with years of experience and ten of thousands of dollars in tools, or our boy Zach?
HERE IN MY GARAGE…
Curious what we use in the shop on a daily basis? Check it out below. And if you purchase these tools from these links, you’re helping support Donut. We appreciate it!
Milwaukee Electric Tools 2550-20 M12 Rivet Tool (Bare Tool) www.amazon.com/gp/product/B07...
Milwaukee - 48-22-0125G - 25 ft. Magnetic Tape Measure - 2-Pack
www.amazon.com/gp/product/B08...
Milwaukee 48-59-1880 M18 REDLITHIUM HIGH OUTPUT XC 8 Ah Lithium-Ion Battery and M18 /M12 Charger Kit
www.amazon.com/gp/product/B07...
Milwaukee Angle Grinding 2781-22 M18 Fuel 4-1/2"/5" Slide, Kit
www.amazon.com/gp/product/B00...
Milwaukee 2735-20 18V Li-Ion Flashlight
www.amazon.com/Milwaukee-2735...
Milwaukee 2557-20 M12 Fuel 3/8" Ratchet
www.amazon.com/gp/product/B07...
Milwaukee 48-11-1880 M18 REDLITHIUM HIGH OUTPUT 18v 8.0 Ah Lithium-Ion Battery Pack
www.amazon.com/gp/product/B07...
Milwaukee 2125-21XC M12 LED Underhood Light Kit
www.amazon.com/gp/product/B07...
Milwaukee M18 FUEL 3/8" Compact Impact Wrench with Friction Ring
www.amazon.com/Milwaukee-Comp...
Adenna Dark Light 9 mil Nitrile Powder Free Exam Gloves (Black), Large - Box of 100 (DLG676)
www.amazon.com/Adenna-Light-N...
Scott Shop Towels Original (75143), Blue, 55 Sheets / Standard Roll, 30 Rolls / Case (10 Bundles of 3 Rolls), 1,650 Towels / Case
www.amazon.com/Scott-Original...
Zep Cherry Bomb Industrial Pumice Hand Cleaner - 48 Ounce (Case of 4) ZUCBHC48CA
www.amazon.com/Zep-Cherry-Cle...
AIDEA Microfiber Cleaning Cloths-100PK
www.amazon.com/AIDEA-Microfib...
Barrow 52 in. Brown Large Rectangle Wood Coffee Table with Lift Top
homedepot.sjv.io/c/2095194/45...
Barrow 52 in. Brown Large Rectangle Wood Coffee Table with Lift Top
homedepot.sjv.io/c/2095194/45...
New to the Channel?
►Watch this: • POPULAR DONUT VIDEOS
We upload almost every day, subscribe so you don't miss out!
►Subscribe here: bit.ly/1JQ3qvO
Click here for more info on joining the Donut Underground!
► / @donut
Shop Donut Merch:
►www.donut.media/
Donut Media is at the center of digital media for the next generation of automotive and motorsports enthusiasts. We are drivers, drifters, and car enthusiasts who love to tell stories.

Авто/Мото

Опубликовано:

1 мар 2022

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 1,3 тыс.

@Donut 2 года назад

What do you want us to try next??

@some_thicc_sedan 2 года назад

Professional Window Tint vs DYI Window tint

@jorgenunez2310 2 года назад

Selling the Miata to the junkyard

@Paios 2 года назад

Salvia, maybe DMT

@gregtennyson 2 года назад

Nitrous or corner balance?

@misssummersalt 2 года назад

Is that custom music by nickisnotgreen?

@dontyouworryaboutit_ 2 года назад

This is one of those things where I would ABSOLUTELY spend the money on a pro.

@danielroytanked2375 2 года назад

I have a prius full of dents. I'm thinking I'll probably try diy-ing it just for fun. I guess it depends on if the car is worth the professional treatment to you. :)

@dontyouworryaboutit_ 2 года назад

@@danielroytanked2375 *absolutely worth it if you give a damn about the car

@danielroytanked2375 2 года назад

@Steven Losey I give a damn about the car. Just not really about how it looks. 100% a point A to point B car. Not going to be taking it to shows any time soon

@Seb-Storm 2 года назад

Indeed some of the detailing processes are usually better left to a pro who can guarantee you a good job when is on vehicles you really care and don't want to mess up

@dan-5678 2 года назад

@Pinocchio congratulations No one fucking cares

@ojasviverman7738 2 года назад

why does nobody ever talk about the mini songs donut makes for the diy or don’t videos? Like they’re so good and funny 😭 11:53

@baselkhan3231 2 года назад

was about to see if the Dent Pro theme song got any love lol

@metal.8997 2 года назад

the one in this episode absolutely slapped too Lol

@dantheman1689 2 года назад

LOL dude i’m mid watch and hear and literally lold

@fenmoods 2 года назад

I'm only in the comments looking for people showing some love for their mini songs! 😂😂😂 They're really really good and so subtle I love it!

@smallhatshatethetruth7933 2 года назад

needed lyrics on the screen though!

@cardkoda 2 года назад

I have always said and continue to say, Donut has an absolute Stellar cast. Everyone is so entertaining and great to watch, especially Jobe. Even better that their content is so fucking sweet

@something44444 2 года назад

Except for James Pumphrey 😬😬

@LochyP 2 года назад

'Cept for jeremiah

@deramon1000 2 года назад

Absolutely agree except for James. I actively avoid his videos even if they're an interesting topic. Lad is obnoxious

@GarretRB 2 года назад

@@deramon1000 y’all are literally the first people ive ever heard saying they don’t like James

@karlo9535 2 года назад

@@GarretRB they're probably on their old years, James energy is too much for them 😂

@kshitijdixit413 2 года назад

Man This PRO vs DIY series is just awesome It gives lots of entertainment and information Love it

@xephael3485 2 года назад

Pro vs idiot

@bradentibbles 2 года назад

I went with the pro. I had my entire car done for $800 CAD, considering my trunk has some hail damage I am amazed that it only cost $800 to get every single dent out of my car. It looks brand new.

@cameronknowles6267 2 года назад

Where did you go in canada

@bradentibbles 2 года назад

@@cameronknowles6267 I am in Toronto, I went to a business called Magic Dent Repair. Great guy.

@SvetGolovkin1462 2 года назад

That's a hook up w/ a brother discount. Honda and Bmw charges $800 cad fixing an inch or 2inches dent. The whole car they'll charged atleast $3000. I know bc I worked for them.

@bradentibbles 2 года назад

@@SvetGolovkin1462 to be fair most if not all of the dents were smaller than a penny in size, Probably 15-20 in total on the whole car though.

@tinyrodent2821 2 года назад

@@SvetGolovkin1462 Going local will almost always be a lot cheaper. Even for paint touch up repair, local garage quoted £120 for a few spots, Renualt wanted over £300

@TotalxTroll25k 2 года назад

Jason was super informative and seemed really comfortable talking to the camera.

@justiceeriksen1413 2 года назад

He gave bob ross vibes to me

@lucasduque8289 2 года назад

The Bob Ross of dent repair

@Casualweeb475 2 года назад

I'm now going to tell them when I'm done.. I'm done

@FromTheDead. Год назад

Glad i wasnt the only one that felt that way. He almost seemed like a regular donut crew to me.

@warrior_poet1776 2 года назад

I’ve been doing body work for about 6 years and even I can’t do PDR it’s a completely different skill. So don’t feel to bad zack

@s3renity690 2 года назад

What does PDR stand for?

@doodslangpo9494 2 года назад

@@s3renity690 I think it's "Paintless Dent Repair"

@Everythingisgoingtobealright 2 года назад

I’ve been doing body work for 35 years, I’ve never picked a dent anywhere near good. We do use glue pulling to straighten dents then fix them conventionally. PDR is an art.

@yongling9825 2 года назад

Never had the opportunity to do it?

@edwinmedina4338 25 дней назад

@@Everythingisgoingtobealrightwhat's the hardest part besides everything?! 😅

@smashbother5684 2 года назад

4:00 Zack: "I spent a hundred bucks on my whole set." Jason: "We will see how that works out." Someday I wish to have Jason's level of professional confidence.

@coalmn7 2 года назад

you will

@spikex8 Год назад

he could have let him use his tools and it would have probably been the exact same outcome...

@germanchrome1810 Год назад

2 Minutes later: - i spent roughly 200 bucks for this 💀🤣

@edwinmedina4338 25 дней назад

@@spikex8It's like letting someone use a Rupes vs a DA polisher from Amazon.

@snowASS8888 2 года назад

As a professional PDR tech this is extremely enlightening to watch, I will be asking my customers who claim they "take out" their dents on their own to watch this video, I applaud a good repair attempt though.

@Omega11998822 2 года назад

Why would you have cusomers to repair dents when they've already repaired the dents? Thats like me getting a painter and decorator in when i've already succeded in decorating my house. Or do you mean your customers who've tried to repair dents?

@snowASS8888 2 года назад

@@Omega11998822 could you paint the Mona Lisa? You could try and see how good your results are, you might be happy with it, or you could ask a professional artist to paint you the Mona Lisa, if they are good then you will not be able to spot the difference between theirs and the original Mona Lisa. Now if that artist has to try and make your painting look closer to the Mona Lisa, than it will take them more times to go over your mistakes and sometimes they will have to start over on a fresh canvas from the beginning. Same goes for PDR and autobody work.

@devonesq.7533 2 года назад

@@snowASS8888 dents are something that if you mess up on, you cannot undo, if you're serious about diy stuff, i would first try it on a car that i dont care about, some 30 year old car with a bunch of autobody damage, if this is a car i care about, i would gladly pay $800 to make it look nice.

@snowASS8888 2 года назад

@@devonesq.7533 I agree! and the truth of the matter is that PDR is the least obtrusive dent repair approach compared to conventional bodywork, I educate my customers on the danger of DIY PDR attempts all the time and that's why they don't try PDR at home after bringing their vehicle to me

@bigross37 2 года назад

@@devonesq.7533 Another option is a junkyard hood, hit it with a hammer and attempt repairs repeatedly until your comfortable enough to try on something ya kinda care about or find out that pros just make it look easy and that your better off paying

@veteran17865 2 года назад

Just putting this out there. This is the only channel where I don't skip the sponsored video message.

@ImDying2Live 2 года назад

I skip it, I skip it so hard.

@wontonii232 2 года назад

@@ImDying2Live Shh we're trying to send signals to sponsors to pay Donut more money because people actually watch the sponsored part!

@HaloAssassins 2 года назад

I like that they actually put effort into it and aren't just reading a RAID SHADOW LEGENDS script

@omikron6218 2 года назад

@@HaloAssassins Internert Historian has masterd the craft of sponsorships. Sometimes the sponsors segment is better than the rest of the video.

@veteran17865 2 года назад

@@ImDying2Live I am sorry you will never know the epic tail of uncle Jerry and his best friend Dave. ;)

@Pienimusta 2 года назад

Covid must have hit music industry hard when James Hetfield is fixing dents on cars.

@s.willis8426 2 года назад

Pretty sure Lady Gaga is writing custom songs for the Donut professionals too.

@josiahelam3331 2 года назад

Seriously underrated comment right here

@liontron8317 2 года назад

The line "that which I desire" in Fuel is about dent repair tools

@joesmith9216 Год назад

oh.........''GIMME FUEL''

@Dentlesstouch 2 года назад

My prayers have been answered 🙏🏽. I’ve been wait for you guys to make a video about paintless dent repair. Being a PDR tech for the last 17 years I can say this video was spot on.

@nfschido 2 года назад

I have uncles that have serious years of experience doing PDR. My first time taking out a dent with their tools took me 5 min to do just one, and they can do it in 60 sec or less and far better. Without watching the video I'd say a PRO is the way to go. Good content, Donut never dissapoints.

@mcfistoyourfood69 2 года назад

KEEP BRINGING THE DAMN HITS!!! the music that's being tailored to each pro is so amazing lol 🤣 need full length versions!!

@anisrabaa4172 2 года назад

11:47

@anisrabaa4172 2 года назад

Indeed !!

@hudsonja 2 года назад

This was the best one yet!

@Desertpunk1986 Год назад

Daaaayum, that’s cooordination. ☠️😂

@zedbets 2 года назад

I apprenticed with a PDR guy for almost a year. I still wasn't very good at it after that long. It's an art as much as a science and takes a lot of experience to be an expert.

@dontyouworryaboutit_ 2 года назад

Worked with a guy that did it as a side hustle in his shop and he’d been doing it for 25 years. It’s an artform

@zacharyhorvath3768 2 года назад

@jaymopar3543 2 года назад

When I used to work as a BIW(body in white) tech before. I used to pull dents left and right in the production line.It's way easier on the bare metal and aluminum surfaces, but when pulling dents on a painted car. Boiiiiiii u gotta have patience to do this job. Thats why I applaud these PDR techs for keeping the job done. I thought I was a pro dealing dents, but when I tried PDR, fuc! I was struggling 😩. Patience is a virtue thats for sure.

@Spadishking Год назад

My dad owns a local body shop in my town, growing up watching him take a beat up peace of junk and making it completely brand new in a matter a couple days. That's when I realized I definitely don't have the patience as well as he, maybe it's learned over the years but watching a professional do body work on a car that needs a lots of work is like art

@colinhess8900 2 года назад

If you’re just wanting to clean up some dents in your truck/beater, go for it. But if you care at ALL about the paint/appearance then hire a pro. It CAN be done, but you’re more likely to make it worse. Ask me how I know.

@Seb-Storm 2 года назад

Yup, even here shows how diy dent fix can go wrong

@kareemashraf- 2 года назад

how do you know?

@colinhess8900 2 года назад

@@kareemashraf- My cousin’s girlfriend’s dads boyfriend’s step uncle did it. Didn’t go so well.

@nittayoshifumi8252 2 года назад

@@colinhess8900 Thats a lot of layers!

@Superman-xr1oh 2 месяца назад

@@colinhess8900Totally sounds believable...

@konnergarrett5543 2 года назад

As a glass company owner I need to see a diy windshield install or crack/chip repair

@poggersthepuppy6547 2 года назад

Chrisfix did one

@Eric-zs6rd 2 года назад

Infinitely easier than PDR

@DilavarHuseynzade Год назад

@@poggersthepuppy6547 I have seen his video, it is actually very informative and he does very good job there. But we should note that he does his works with propers tools, does not cheap out in anything (as it should be) and he is not totall beginner, he is at this point mid level technician. Most of us would not be able to do repairs in his level even at same conditions.

@damcleandetailing 2 года назад

I think it’d be interesting to see the pros use the “budget” tool kits and teach Zach at the same time. This may help the newbies see just how far they can get on a budget setup before needing to step up to the higher end more specialized tools. In the case of PDR I’d say it’ll take a lot of time, experience and skill before one needs to start spending a few grand on tools let alone 25+

@pilotdog68 2 года назад

Problem is these pros have no incentive to teach themselves out of a job

@MaximillionBucks 4 месяца назад

@pilotdog68 yup, i see a bunch of them in this comments section, gatekeeping their profession. Same thing with detailers, they lack the drive to introduce the next generation to the profession. Otherwise we'd realize this is all work we could be doing ourselves

@theroburrito 3 дня назад

Really none of the tools the pro was using were that expensive. He has 20k total in tools because he's got tools to cover a wide range of problems. And things like carbon fiber handled mallets.

@El_SantoTaco 2 года назад

this series is amazing but whats even better are the theme songs for the pros. Imma need a spotify playlist.

@tylerknowles2408 2 года назад

I was hoping someone else liked the music lol

@ethakis 2 года назад

Jason looks like the main character in an action movie. Watching him work is kind of the coolest thing ever.

@Tux612 2 года назад

POV: zach just wanted to do this episode so the pro can remove the dents from his miata

@DankoleClouds 2 года назад

I love that you're not only showing us the DIY method and evaluating whether or not it's worth it, but you're also showcasing a local professional who's knowledgeable about the process. This series is fantastic.

@bKoelle689 2 года назад

As a collision tech, watching our PDR guy is amazing. huge appreciation for PDR guys. Also saves some money on a very occasional opps in the shop.

@veronv1670 2 года назад

Look at the Flicka Da Wrist 🤣 Haha absolutely love the mini song!

@aaaaaabbbbbbccccccd1 2 года назад

“This is more annoying than my hair” As a guy who started growing mine out around the same time as Zack (it’s about the same length now) I 100% relate. It’s super annoying sometimes but so cool it’s worth it

@dipstiksubaru3246 2 года назад

It's 100% worth it in the end. Zachs is badass it's nice to see someone that's different on the show, not all cookie cutter dudes.

@AN2Felllla 2 года назад

Haha same! I permanently wear headphones now because it keeps my hair out of my eyes, but now even that is starting to fail...

@dipstiksubaru3246 2 года назад

@@AN2Felllla it's worse if u have curlyier hair than Zach's. Worth it in the end though.

@infantsorrowtt 2 года назад

I've been doing pdr for a while and Jason seems like a nice guy most older pdr guys especially hail techs have such a ego but from what I've learned is most hail guys sometimes struggle with side panels and oversized dents.

@pdub62 2 года назад

I would say it’s a good 50/50 on hail guys that have the skill to do it from route type experience but being too lazy to put much effort into side panels as they could fix a whole hail panel for more $ in roughly the same amount of time vs. hail guys who only learned how to fix hail and have no experience at all with side panels.

@infantsorrowtt 2 года назад

@@pdub62 thats true cause I have experience in both retail hail and route cars and when I work in a shop I see more experienced hail techs struggle on certain panels sometimes even drilling holes but guys who have experience in both dont have that issue but they are sometimes slower at hail. All in all I like the job so I like trying everything from hail to oversized dents Bryce Kelly is a huge inspiration. But my complaint is the ego that guys get everyone claims to be the number 1 tech aswell as how everyone constantly complains and gossips

@matthewfowler5214 2 года назад

Let’s go Wednesdays. Missed you there for a couple weeks. Love the new series 🔥

@trashandchaos День назад

Man, Jason's an artist. It's a pleasure to watch him work.

@paradox... 2 года назад

11:53 Will be vibing to this for the rest of the day, thank you very much.

@julian23561 2 года назад

Jobe knows how to make his audience have a good time, always massively entertained by his videos.

@marcusvogt95 2 года назад

This pro was great in front of the camera. Good stuff Donut!

@verified.2606 2 года назад

You guys have the best sponsored segments ever.

@JCHUCKK1020 2 года назад

This guy is so zen and chill about it. I could watch him fix dents for a while.

@tinyrodent2821 2 года назад

Loving this series. We need a Diy or Dont for some modifications, especially after Money Pit. Would love to see some simple stuff like Suspension changes, all the way up to custom exhausts or remaps.

@Tacgibs 2 года назад

Remap is definitely a don't, as exhaust for a turbo car !

@sortsvane 2 года назад

They really made a cover song for their dent guy. That's quality.

@sk8xaq 2 года назад

I'm stoked that you guys are going as complete as you can on these cars and incorporating video content to accomplish both wins at the same time. It would be awesome to be able to see a collection of the cars that you guys have transformed and also see how restored and far they can come from what they started as. Really great to see these useful topics, it doesn't matter if it could be common knowledge to the hardcore out there, you guys have a great teaching and presenting style so its always useful information even if it might not be new information. Thanks!

@user-te1le7ck6b 2 года назад

The effort for the sponsors ads and Jason music haha 😂😂😂😂😂😂 👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻

@notme6323 2 года назад

I love watching someone that is really good at what they do. Very impressive.

@alucard5921 2 года назад

Thank you donut media I’m in a really dark place right now so your informative and funny and just plain entertaining so thanks guys ur genuinely helping me

@whatwhale5888 8 месяцев назад

Hope youre still hanging in there and that things are better now...

@CzechAvailabilitie Год назад

Whoever does those low-poly 3D models and animations needs a medal.

@chukisthereason 2 года назад

This pro needs his own show.

@Heroo01 2 года назад

Donut could get almost literally anyone interested in cars. I love this channel so much. Quality beyond belief

@MoMo-zo1jw 2 года назад

Really great video! It makes me appreciate pros like Jason even more.

@DampActionRC 2 года назад

*Look at the flick of the wrist* *DAMN that’s coordination* 😂

@Dustin_Platt 10 дней назад

The song about the professional dent guy is hilarious and a banger.

@adamhayden5152 2 года назад

I wouldn’t touch this and I do a lot of my own work on my cars. This is a job for a well seasoned pro! I would pay this man to fix the few door dings on my 05 lowered deville.

@mujtabasaeed6697 2 года назад

I'm loving this new series 😍

@vloppysagina 2 года назад

I watch all the ads done by the Donut crew, best ads on RU-vid imo, and the only ones I don't skip! Love it

@MulettoMotorsports Год назад

I love how you dedicate a song to every professional on the shop. It's all in the details, thank you Donut media.

@Ichibuns 2 года назад

Once upon a time, a deer slid into the side of my car and placed a giant dent on the door. I put some soap and water on the dent and pulled it out with a plunger. It wasn't perfect but it was one of my crowning achievements.

@blauwzakjecrack 2 года назад

I would like to see alot more content with Jason. Perhaps a series on how to fix dents!? What a guy!

@combedintuition Год назад

I'm loving this series, staying humble and letting the pros do their thing so we can all learn something new.

@VonD00M900 2 года назад

I’m loving these car therapy ads

@thediscgolfmann 2 года назад

Loves these videos, hope to see one with paint/clear coat restoration

@JayJaxRHS13 2 года назад

I love this series! Anything with Zack is always my jam. Something I think that would make this series even better would be asking the pros how to start and get I to doing what they do. I would definitely pay a pro to fix my fender but I also would love to learn how to do some bodywork like this, only issue is I have no idea where to start

@RoguePC4U 5 месяцев назад

As a pro myself, this is a tough question to answer. PDR Training (where we all start) is expensive and meant for anyone wanting to do this for a living. If you only want to do this part time, as a hobby, or just for your own repairs - it would be overkill on the budget. And PDR is difficult to learn. You need to spend years just to get "decent" at it.

@SamJ1000 2 года назад

As a paintless dent repairer myself I found this video highly accurate and entertaining. Additionally much like the PDR Guy said, I get called often by people who have attempted a repair themselves and have damaged the dent beyond a perfect repair by stretching the panel, especially with glue.

@sniperlif3 2 года назад

I love these Pro vs DIY episodes. I think it is awesome to give praise to those professionals, not to mention, it provides insight into what is available in the car world. I never thought there was such thing as a mobile paintless dent repair.

@Geeboogobber 2 года назад

This is one of the best ads the donut crew has ever done

@MysterWynter 2 года назад

Sometimes you just gotta watch Donut vids for the sponsors

@JMRSplatt 2 года назад

What a great guest and he's such a good sport about sharing secrets! Thank you guys.

@Professor_GonZo 2 года назад

Whoever does the lil songs for this series deserves a raise. They are absolute gold. This one's for you, Professional Song Guy...

@ChrisPBacon-gn9jx 2 года назад

11:50 so where are we getting a Donut Media record label?

@derekwilliams1155 2 года назад

fr why is nobody mentioning it?? i was vibin

@mcmaschio 2 года назад

Yesss plsss … i have tried so many tricks to try to remove dents … once on the roof which was caused by a mango falling on it 🤧

@bluethunder6506 2 года назад

I love the design of those 3d models!!!

@bossrobs5416 Год назад

I'm just professionally done this on my car by a pro. Worth every penny.

@OhhthatsCody 2 года назад

I love catching donut media change their titles earlier this was like “ dent pulling pro vs diy “ or something

@hhstarwars 2 года назад

As a 3 year pdr technician I can confirm it takes a while to figure out the magic finesse and also learning all the different manufacturers gauges of metal and what metal is used.

@s.willis8426 2 года назад

It's one of situations where you aren't paying the guy $600 for the 4 hours he works on your car, you're paying him $600 for the 10 years he spent learning how to do it.

@lemster101 2 года назад

Really enjoying this new series!

@Camell513 2 года назад

The producton quality on this series is amazing. The custom music, the custom sprites/modles. Truly a chefs kiss

@thejusmar 2 года назад

"Should you pay someone with experience and 100x more tools than you to do a very specialized job?" Yeah, tough question.

@Paios 2 года назад

once when I was a kid we were playing basketball in my friends driveway and the basketball ricocheted and left a pretty big dent in the door. His parents were obviously furious, but a day or two later we were back at it, shootin hoops and someone's butt hit the edge of the dent perfectly and popped it out. complete stroke of luck, but it was pretty koo

@AisuruMirai 2 года назад

"We're Phat-Ass Dent Repair! Call us at 1-900-MIX-A-LOT. We'll fix them nasty dents."

@Paios 2 года назад

@@AisuruMirai yo funny enough it was the fat kid of the friends group who dun it. We would've paraded him around like Rudy but ya know....

@davegoldspink5354 Год назад

Absolutely brilliant video. Watching a Pro at work is something else. Thanks for sharing. 👍🏻👍🏻👍🏻

@jaydub7984 2 года назад

Been loving this series

@Lexor888 2 года назад

What a great way to remove your small dent just to have 35 smaller bumps... call a pro for this 😂

@bruhnt5063 2 года назад

Day 299 of asking Donut to bring old B2B back

@anynonymous1585 2 года назад

Do you ever comment anything else?

@LtNduati 2 года назад

I love the little songs we get in the middle of the episodes. This series rocks!

@iansaccount8991 2 года назад

Thank you for these episodes!! Always a great day when @donut uploads

@diogoalmeidavisuals Год назад

You know what costs less than 600$? A new fender

@swartzkoft7886 Месяц назад

A fender without paint yea maybe

@StoneWolfe-vl9nc 10 дней назад

@@swartzkoft7886rattle can job would still put you under 600

@swartzkoft7886 10 дней назад

@StoneWolfe-vl9nc that's what is called a shit job but be a cheap skate

@jordanweimer788 2 года назад

That shot of the Jeremiah’s notes. 😂😂😂 Reminds me of the Jackie Treehorn scene in Lebowski.

@XSAoRAD 2 года назад

As a PDR tech of 12yrs, I gotta say THANK YOU! Too many car guys think we just "pop" or quickly pull out dents with little to no skill, every week I see a suction cup or eBay glue pull kit in the corner of the garage when I do a repair.

@mikeoxlong4600 2 года назад

I can not explain how awesome this new series is, its not just buying and modifying a car that I can't afford it's stuff that I can actually use!

@jakelannetti3128 2 года назад

The best part of that carparts ad is that someone was laying down in the Miata to pop the headlights up and down

@erictwhitman 7 месяцев назад

I really like the pros you've picked for this series. They don't put down the DIY, but try to educate while being confident in their work.

@kameroncousins2093 2 года назад

That car parts add is just top notch. 🤣

@shevoy_000 2 года назад

I think Donut should consider a marketing agency, Donut Media Marketing.

@kyleweber5517 2 года назад

Fantastic video and thanks to your guest for sharing his knowledge

@jtreinen762 2 года назад

I used to be a detailer at a pretty big dealership here in Omaha. The dealership's contracted PDR company would sometimes use one of our bays if we had room and the body shop nextdoor didn't. Watching those guys work was like watching a master sculptor creating his next masterpiece. The sheer focus and concentration in their faces was something I'd never seen. They'd bring in a hail damaged car that looked like the surface of a golf ball, and make it look like it was brand new. Of course, they'd wash those cars themselves after they were done. We shidiot apes weren't going to be the ones to ruin the hours of painstaking effort they'd just put in. PDR is truly an art form, and it takes a lot of time and patience to be good at it. These dudes performed miracles.