Тёмный

$7 - ENTRY GRADE GUNPLA RX-78-2 GUNDAM Full Build|史上初のエントリーグレード ガンダム ガンプラ全塗装|ASMR 

Potan Creates
Подписаться 215 тыс.
Просмотров 1,3 млн
50% 1

・$7 - ENTRY GRADE GUNPLA RX-78-2 GUNDAM Full Build|史上初のエントリーグレード ガンダム 全塗装|ASMR
☆Subscribe for the upcoming build: / @potancreates
☆Go ahead, get your very ENTRY GRADE RX-78-2 GUNDAM:
amzn.to/3rDqqsI
---------------
エントリーグレードRX-78-2ガンダムの全塗装動画になります。ガンプラって、塗装すると見飽きないものなんですねー。初めて知りました。
子供の頃に組み立てたものは、翌日には飽きていました。顔に墨入れしたときは、思わず「かっこよw」と独り言をつぶやきましたね。
---------------
First look and full build of very first Entry Grade Gunpla RX-78-2. It only costs $7 for buying a kit... seriously?? I was surprised by the quality. Nice silhouette. This kit currently exclusively available at Gunpla Base Tokyo and Fukuoka.
Apparently, EG RX will be released to the public next year. Stay tuned for new information.
Disclaimer: Some people in the comment section told me I'm pro. Thank you, but this is the first full build, and I am a complete amateur. Hopefully, I get better in future videos.
---------------
《Tools I use for Build》
・BXQINLENX Professional 8 PCS Gundam Model Tools Kit - For those who can not afford to buy luxuries, a product like this can be a good starting point.
amzn.to/33LAgy9
・Nippers
Tamiya Sharp Pointed Side Cutter
amzn.to/32MVLQ5
GodHand Ultimate Nipper
amzn.to/2FXJFL6
・Chisel Related
BMC chisel
0.1mm amzn.to/2ZT14vr
0.125mm amzn.to/3b6ND12
0.15mm amzn.to/2FL5Mo9
0.2mm amzn.to/3mDmc2x
BMC danmo
amzn.to/3hSFihj
GodHand Spin Blade
amzn.to/35UmmfN
GodHand Spin Mold
amzn.to/3r9NCyK
Carving Guide Tape
3mm amzn.to/2RIXUWD
6mm amzn.to/2FC2Een
・Sanding
Softback Polishing Sticks
amzn.to/3kA9bos
Tamiya Sanding Sponge Sheet
amzn.to/340bV8f
File Flat 6 mm
amzn.to/3hIq5iY
・Seam Removal
Tamiya Cement
amzn.to/3b6S8Zt
・Cleaners
Ultrasonic Cleaner
amzn.to/3ciPaQh
Parts Dryer after Ultrasonic
amzn.to/2FCjWIh
・Custom Paint Related
Mr. Color
Pick your own color accordingly.
Surfacer Evo
Gray amzn.to/2EgUKpQ
White amzn.to/32NbcYD
Paint Tray
amzn.to/3cekuzV
Paint Stirrer
amzn.to/3hOl4FN
Gaia Color Thinner
amzn.to/3mDCY1p
Enamel Thinner
amzn.to/3mDV6II
Tool Wash
amzn.to/3iOVgKS
Spray Booth
amzn.to/3iMZr9W
Creos Mr. Procon Boy Airbrush 0.3mm
amzn.to/2RZimWA
Creos Mr. Procon Boy Airbrush 0.5mm (For surfacers, metal paint)
amzn.to/3htssK6
Creos L7 Compressor
amzn.to/3sSf9p9
Painting Base
amzn.to/3hOr7tJ
Masking Tape
amzn.to/3iJfBRL
Almighty Clip Stick Mini
amzn.to/33E0Zg0
Panel Line Accent Color
Black amzn.to/3ksOTgC
Dark Gray amzn.to/3mCPbn5
Clear
Flat Matt amzn.to/33LWXCA
Gloss amzn.to/3iJgKJ3
・Decals Related
Mr. Cotton Swab
amzn.to/3iPfjsG
Finish Master
amzn.to/3uJCoTY
Mark Setter
amzn.to/2HfewmN
---------------
《プラモ制作に使用している道具一覧》
ニッパー類
・ゴッドハンド アルティメットニッパー
amzn.to/2HhvVLL
・タミヤ クラフトツールシリーズ 先細薄刃ニッパー
amzn.to/3mDTkY0
スジボリ関連
・スジボリ堂 BMCタガネ
0.125 amzn.to/3ccIJyo
0.15 amzn.to/3kE2Fxf
0.5 amzn.to/2FBhqSB
1.7 amzn.to/2ZUjX14
・ ハイキューパーツ スジボリ用ガイドテープ
3mm amzn.to/3kzyDKY
6mm amzn.to/33KFsCp
ヤスリ類
・Mr.セメントSP 40ml (合わせ目消し用)
amzn.to/3kzpbaw
・スジボリ堂 薄刃鬼斬
amzn.to/35StCJ6
・スジボリ堂 二代目鬼斬 細目
amzn.to/2RIjrPc
・ウェーブ 切れてるヤスリ
400 amzn.to/2FSpq18
600 amzn.to/35QxkTN
・タミヤ研磨スポンジシート 400、600、1000、1500 セット
amzn.to/2FOJX6O
パーツ洗浄関連
・シチズン 超音波洗浄器
amzn.to/2ZSbICF
・山善 食器乾燥器
amzn.to/2ZSHGic
塗装関連
・GSIクレオス Mr.カラー各種
・ガイアノーツ サーフェイサー
グレイ a.r10.to/hzxKhl
ホワイト amzn.to/33MGEFk
・ガイアノーツ Ex クリアー
光沢 amzn.to/3mBMoKT
フラット つや消し amzn.to/2RM6BiI
・ガイアノーツ ガイアカラー薄め液 (中)
amzn.to/2ZTsLnK
・ガイアノーツ メタリックマスター (中)
amzn.to/2EnWlue
・ガイアノーツ マイルドツールウォッシュ (大)
amzn.to/35RkhkV
・Mr.リニアコンプレッサー L5 セット
amzn.to/3kzpB0A
・タミヤ エアーブラシシステム スプレーワーク ペインティングブースII ツインファン
amzn.to/33O9cyi
・タミヤ スミ入れ塗料
ダークグレイ amzn.to/3hVmP45
ブラック amzn.to/3cgG9Yj
・タミヤ エナメル溶剤特大
amzn.to/2FNNTVD
デカール関連
・Mr.綿棒 俵型タイプ 50本入り
amzn.to/2FKe4N3
・Mr.マークセッター
amzn.to/3crvE4x
文字数足りないので、未記入の道具に関してはコメントしていただければAmazonリンクで返信させていただきます。
---------------
Thank you for watching my channel.
I'll do my best to bring something new to the community.
Have a good build, guys.
---------------
#potancreates
#ガンプラ
#gunpla
#エントリーグレード
#entrygrade
#rx782
#エクリプスガンダム
#ガンダム
#gundam
#custombuild
#fullbuild
#asmr
#全塗装
#pgunleashed

Опубликовано:

 

30 сен 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 866   
@g3lo218
@g3lo218 3 года назад
If he can make a cheap kit look expensive, I can make an expensive kit look like it was created by a 3 yr old.
@madderester7304
@madderester7304 3 года назад
lol me 2
@st.salmonella9827
@st.salmonella9827 3 года назад
My first kit was a master grade... you can probably imagine how that turned out with scissors
@g3lo218
@g3lo218 3 года назад
Mine was a master grade too. I just plucked it with my fingers
@st.salmonella9827
@st.salmonella9827 3 года назад
@@g3lo218 the pain
@Bartholo-meow
@Bartholo-meow 3 года назад
@@g3lo218 i can't believe u don't even have a nail clippers
@wd7187
@wd7187 3 года назад
When an entry grade looks better than my master grade.
@ryuzakikentaro350
@ryuzakikentaro350 3 года назад
i feel you bro.
@MrNoobzGamer1998
@MrNoobzGamer1998 3 года назад
Yeah, HG too.
@rafaeehussin3866
@rafaeehussin3866 3 года назад
Real Gred feel it too
@knuckles7790
@knuckles7790 3 года назад
Daaaaaaaaaaaamn!
@christiandaniel3714
@christiandaniel3714 3 года назад
Sad Grade noises
@treemannick2969
@treemannick2969 3 года назад
Entry Grade:"No tools, no stickers, no painting" This video: scribers, decals, airbrushing
@pine9974
@pine9974 3 года назад
The kit is called entry grade
@-MastersTV-
@-MastersTV- 3 года назад
Dude gundam is freedom u can do any thing u want
@zangetsu27
@zangetsu27 3 года назад
I can relate😅😅😅
@hiroto5095
@hiroto5095 3 года назад
Yeah, I don't know what that's about.
@SylvianX
@SylvianX 3 года назад
No man. That's moddeling done RIGHT. Kit is entry - most basic and cheap you can get. And still giving him love you can make something amazing.
@pengfeixianyu2268
@pengfeixianyu2268 3 года назад
7 bucks for the entry grade, 700 for the tools and materials
@Rob749s
@Rob749s 2 года назад
300 for labour.
@gavig1981
@gavig1981 2 года назад
No shit
@starmanoo7
@starmanoo7 Год назад
Your scary right. Dude I just bought the basic shit and it ran 700 by time I got the paints, I gotta wait till payday to buy the stupid vent
@tks5537
@tks5537 4 года назад
You just upgrade the appearance from EG to RG
@yoonjaichoi2422
@yoonjaichoi2422 3 года назад
Nah man it’s master grad e
@flamestoyershadowkill6400
@flamestoyershadowkill6400 3 года назад
no cause no inner frame
@henrimachan
@henrimachan 3 года назад
@@David242Rblx @Flamestoyer Shadowkill he meant master grade detail
@yoonjaichoi2422
@yoonjaichoi2422 3 года назад
Thank you doge
@-MastersTV-
@-MastersTV- 3 года назад
No it look like a pg I even thought he was going to review a pg Rx 78 gundam
@NickDyers
@NickDyers 4 года назад
I like your building video style: no talk, lots of ASMR, & pointing out important details. subscribed!
@PotanCreates
@PotanCreates 4 года назад
Awesome, thank you!
@PersonMan-qf3om
@PersonMan-qf3om 3 года назад
Same
@Tinybudgetfilms
@Tinybudgetfilms 3 года назад
I hope to be just as successful soon xD
@Bartholo-meow
@Bartholo-meow 3 года назад
BANDAI: so our 'no tools etc' labels r some jokes to you huh? time to rerelease the colourless gunpla
@frza_6213
@frza_6213 3 года назад
Would love to see that i mean it will be heaven for custom builders
@nguyenleucduong3446
@nguyenleucduong3446 3 года назад
It's actually realeased since 1980, the fg rx 78-2
@Bartholo-meow
@Bartholo-meow 3 года назад
@@nguyenleucduong3446 that's why i said 'rerelease'
@nutthings4017
@nutthings4017 3 года назад
This aged well
@natuno_sumisora
@natuno_sumisora 4 года назад
作業用材料費の方が圧倒的に高い(白目)
@revodako113
@revodako113 3 года назад
I like how the captions just say “music” when he takes the parts of the gundam.
@dagreenshark
@dagreenshark 3 года назад
Did he back then know how to use nippers.
@orcashamudeluxeu567
@orcashamudeluxeu567 3 года назад
Music to my ears
@tomat4t4
@tomat4t4 3 года назад
Definitely not an amateur. This whole thing costs more than $7.
@ntrogaming9933
@ntrogaming9933 3 года назад
That is 16 minutes well-spent. Yes, watched it twice.
@kazukiyomeyer2227
@kazukiyomeyer2227 3 года назад
Respect man. Respect.
@neokzproject28
@neokzproject28 2 года назад
you watched 2 times... i watched more than 5 times.....
@buma2462
@buma2462 3 года назад
When an entry grade looks better than my school grades
@crimsama2451
@crimsama2451 3 года назад
Very awesome work! As someone curious about the hobby, its great to see just how far a beginner kit can truly go. Great showcase that it isnt all about expensive kits. Theres always room for improvement on the builders side.
@im.miracle
@im.miracle 3 года назад
This is really awesome! The video style, the RX-78-2 Entry Grade being upgraded to the next level, everything! Earned a subscriber! Love from Canada! Hope to see a Perfect Grade in the future too!
@amau994
@amau994 3 года назад
This is when a good builder is also a good videographer. Subscribed.
@monsterbroh9085
@monsterbroh9085 3 года назад
Ultimately this was just a flex, he said this was an Entry Grade, and still made it insane! Imagine what Master grade might be...
@gefehede7783
@gefehede7783 3 года назад
Master grade when he customizes it = Perfect grade.
@jaimeshickman-hymers2499
@jaimeshickman-hymers2499 2 года назад
@@gefehede7783 perfect grade when he customizes it = uhhhhhh idk.... perfection
@thanatosstorm
@thanatosstorm 2 года назад
@@jaimeshickman-hymers2499 He has finished it. And it was exactly that.
@casediedwell5094
@casediedwell5094 2 года назад
The thing I really love about Gunpla is that you can put TONS of effort into the cheapest kits and make something amazing. Or you can just snap fit that PG and call it a day. So much room to 'do stuff' with it!
@captainfry245
@captainfry245 2 года назад
they’re perfect grade for a reason, damn it!
@mubbie
@mubbie 3 года назад
The editting looks like this channel got 5m+ subs. Actually this channel deserves it.
@daitoray9876
@daitoray9876 Год назад
This is a guide on how to make a $7 Entry Grade worth the same amount as a mini Master Grade.
@htetnayl
@htetnayl 11 месяцев назад
$7 for the Gundam kit. But only paint colour and decals are over $10 already, which excludes the airbrush. I got a lesson from Tamiya 1/24 cars. I bought those cars because of cheap. But once I have to buy paint, spray, masking tapes, extra decals, and so on, it is 2 times more expensive than a model kit. But this video is cool and I LOVE IT. Great job. Potan Creates is one of the best channels on RU-vid. Cheers.
@filipposguotti6974
@filipposguotti6974 3 года назад
gunpla builder: uses the god hand separating tool pota: I HAVE THE GOD HANDS
@Roger_808
@Roger_808 2 года назад
one of the stupidest things ive ever done in my life was pay 30 dollars for this set on amazon.
@tyerker
@tyerker Год назад
This kit is SO much better than it has any right to be. It can hold poses so much better than most of my MGs or RGs.
@moe-td1bf
@moe-td1bf 3 года назад
He used his hands instead of a plier. What a mad lad
@adamharith782
@adamharith782 3 года назад
I used hand back then
@NeroVingian40
@NeroVingian40 3 года назад
I mean, that’s how Entry Grades are supposed to be cut out. Bandai literally advertised it like that.
@DavidGonzalez-xd5mh
@DavidGonzalez-xd5mh 3 года назад
Entry level: proceeds to make it harder then anything i could do
@williamsusanto8082
@williamsusanto8082 Год назад
To think, that you turned an Entry Grade into a “Real Grade” Revived. Awesome job! This video truly lives up to the title, “Excitement Embodied”!
@BlackLotus30
@BlackLotus30 Год назад
I'm almost done with my first time building a Gundam, I went blind and bought a RG of the Zaku II, lets just say mistake were made. I'm on the decal step right now and i'm crying.
@subtrict8245
@subtrict8245 Год назад
Dang, you can turn just about any gundam into a master piece. I wish I had artistic skills like that. Keep it up
@muhammadazim3374
@muhammadazim3374 Год назад
I think you can, i mean study lil by lil, practice and all
@バイポーラだよ
@バイポーラだよ 3 года назад
ランナーから外す時手でやってるのもちゃんとエントリーモデル意識してる感あって素晴らしい👏
@tk_mitternacht963
@tk_mitternacht963 3 года назад
If you try to convince me that this is an rg kit instead of entry grade I would have believed you mate .__.
@robk6551
@robk6551 3 года назад
Taking pieces out of runners without clippers somehow just feels wrong
@bewitchedk
@bewitchedk 3 года назад
This is a Entry grade, so that's kinda the point
@johnl2613
@johnl2613 3 года назад
Bandai designed the kit in such a way that one can snap the pieces off. I guess if you dont pull them off roughly then you are fine. Even if you do damage some, you can fix w putty and filler
@kalendaryo9864
@kalendaryo9864 3 года назад
The box said no tools, no paint, no sticker
@nargarex2390
@nargarex2390 3 года назад
Not all people have extra time, effort, and money to buy gunpla tools and accessories. I have built my kits just fine with only my hands, instructions manual and cuticle nippers.
@bewitchedk
@bewitchedk 3 года назад
@@nargarex2390 same
@blacknitron007
@blacknitron007 Год назад
RGのデカールをEGに流用出来るんですね!凄いです。
@el1704
@el1704 Год назад
So entry grade can customize to this level there is no need to buy higher grade kits for advanced modellers as it looks freaking awesome 🎉
@tacobellbroly2489
@tacobellbroly2489 3 года назад
Can you please not do it fast build
@tbh_fan6936
@tbh_fan6936 3 года назад
But why?
@whyamarhere117
@whyamarhere117 3 года назад
@@tbh_fan6936 bcs he want to custom it the same way he do
@tbh_fan6936
@tbh_fan6936 3 года назад
@@whyamarhere117 oh ok
@alfalanceer17015
@alfalanceer17015 3 года назад
Taco bell broly
@zulfikranzulmos4066
@zulfikranzulmos4066 3 года назад
U can change playback speed
@TRDGE
@TRDGE 11 месяцев назад
It's never about the grade of the kit but the level of the modeler 🔥
@SBaby
@SBaby 3 года назад
0:55 - One thing, if you're ever doing a Perfect Grade build (or any Gunpla build, for that matter), never do what the person is doing here. NEVER punch out every piece from every one of the runners. There's no reason to. ALWAYS do one runner at a time. The manuals are formatted in a way where each runner has a beginning and an end.
@dooking4129
@dooking4129 3 года назад
" Oh are you new to Gundam?" " No, I'm not" " Then you should try the more advance Gundam like in master grade" " I know what I'm doing" I bet that's what happen when he bought the entry grade I also love the end, cause its like those cinema coke commercials in the movies You should build more Gundam! Love the videos!!!
@juliusthecoolius7823
@juliusthecoolius7823 3 года назад
The entry grade is cheap. The effort, the hassle and the additives made it all. But isn't that what makes hobbies more fun? Great Video! Keep up the good job! Found this vid just now and its great.
@traumatisedboi8919
@traumatisedboi8919 3 года назад
When professional do the entry grade be like: Nice tutorial.
@KatlikeRider
@KatlikeRider 3 года назад
0:41 - 1:04 Yo this is a bop
@magebane360
@magebane360 2 года назад
Crazy how amazing you made this look into. This was a Potan Grade build.
@troylandzerep8045
@troylandzerep8045 3 года назад
soo you just bumped the grade up form Entry grade to the middle of HG and Rg nice..
@vergil4418
@vergil4418 3 года назад
Now, I shall perform a magic trick where I make a Perfect Grade, look like a polished turd!
@NoName-wr2nm
@NoName-wr2nm 3 года назад
Amazing work. I personally prefer this look over the revive because despite what people say, this version is more accurate to the anime.
@jwww0313
@jwww0313 3 года назад
I just love the way how you make even the simplest gunpla so perfect
@lynncai891
@lynncai891 2 года назад
Just search this vid. I never ever buy any gunpla before. Tomorrow my 1st gunpla will arrive and it was this rx entry grade. To see potan customise it like this make me feel pressure. It was perfect for me. Damn so talented.. let see what my 1st gunpla will be. Haha. Cant wait. 😅
@Melloww2000
@Melloww2000 Год назад
bro made an entry grade look like a real grade,respect.
@warsfamicom8422
@warsfamicom8422 3 года назад
いろんなプラモを作ってきたが、やはりガンプラに行き着く。プラモ界では別格の存在感を放っている。ファーストガンダムのストーリーが蘇ってくる。
@darthnihilus9502
@darthnihilus9502 3 года назад
OMG he is not using God Hand
@건프라빌드-v1k
@건프라빌드-v1k 2 года назад
MG gundam barbatos build Please 😌😌😌
@animus_water
@animus_water 3 года назад
Never seen someone put so much work into an entry grade RX-78-2
@sagarasouske
@sagarasouske Год назад
From $7 to $70.
@adityaputu2107
@adityaputu2107 3 года назад
outstanding effort on the building phase and video production as well, congrats!
@chanwooje5204
@chanwooje5204 8 месяцев назад
I thought that it was mg. it was satisfying🤩🤩🤩🤩
@AangDknight
@AangDknight 3 года назад
*Meijin Kawaguchi approves of this video.* If only we get RG granddaddy remastered ..
@starwarstheriseofpokemon8903
@starwarstheriseofpokemon8903 2 года назад
Wow it looks so nice it looks like a master grade complete with all the stickers and stuff
@dark_akatsuki
@dark_akatsuki 3 года назад
Either u give MASTER POTAN a 7 dollar entry grade gundam or a Pg Unleashed gundam, I bet u he will never let u down with his exceptional skills!! 😎😉
@ヴぇ
@ヴぇ 3 года назад
原点にして頂点。 やっぱりカッコいいですね! とても作業が丁寧で尊敬します!
@SBaby
@SBaby 3 года назад
You know, all the tools the person uses here probably collectively cost more than just buying a Perfect Grade kit. And the only tool you need for PG is a cutter tool for the runners.
@PPPeepeepoopoo
@PPPeepeepoopoo 3 года назад
for some reason whenever he breathes it reminds me of HowToBasics but gunpla
@The.throngler
@The.throngler 3 года назад
*Proceeds to throw eggs at the build*
@theguy3851
@theguy3851 3 года назад
All this for the entry grade? I kid, this was a great video!
@gunpla12
@gunpla12 3 года назад
me:how many dollars you put on this EG gundam? pota:idk me:look this adition pota:holy sh**t
@randominternetguy88
@randominternetguy88 3 года назад
"Entry Grade" Me when I saw the end product: *this can't be real-*
@OPcakeYT
@OPcakeYT 2 года назад
This guy nearly making everything cheap become expensive
@gaiazero598
@gaiazero598 3 года назад
I guess this is what gunpla building really means it doesn't matter which grade you bought as long as you have great imagination you can build cool and amazing models
@2hd1_07
@2hd1_07 2 года назад
For me,this is better than other grade,its more squares and every shape are more detail The best thing is no sticker and nipper,thats cool asf
@ottery2242
@ottery2242 2 года назад
Wait....im new at gunpla's collecting and yall take all the parts off from the start? I would be confused af XD.
@FLG8r
@FLG8r 2 года назад
great attention to detail ... making an entry level model look even better!
@victorvandenbrink6851
@victorvandenbrink6851 Год назад
I recently assembled this guy as my very first Gundam build! I have to say yours looks a lot cooler, I did some rudimentary weathering with an ink pen I had lying around haha. But it was a lot of fun though.
@Jolofsor
@Jolofsor 3 года назад
this type of video is my favorite type. there is something about straight-to-the-point and no-talking videos on this current state of youtube. keep it up :)
@ezen2278
@ezen2278 3 года назад
You’re freaking amazing! Loved the outcome. 🦾🦾 Definitely out of my builders block after this video
@marcvaldelara
@marcvaldelara 2 года назад
An underrated channel. Bandai and Tamiya, pay this man. Subscribed!
@natalebabbo-gunplaanddioramas
@natalebabbo-gunplaanddioramas 3 года назад
How to make an entry grade kit look fantastic! Great job!
@hudsonball4702
@hudsonball4702 3 года назад
Pretty damn badass brother!
@Synesgarage
@Synesgarage 2 года назад
$7 + painting + decal not $7 but is so good bro
@bearity
@bearity 3 года назад
Lol I thought mine was painted so now I have a random white gundam on my desk
@Healthandwellnessp90
@Healthandwellnessp90 3 года назад
Watching this is like watching someone assemble a watch
@k1enbui347
@k1enbui347 3 года назад
Seller: 7 dollars Him: KABOOM!!! 70 dollars
@24k_oniloni7
@24k_oniloni7 3 года назад
Entry Grade: No need for tools, paint or stickers 😁 This Man: Yeah…We dont do that here
@brogovroom3174
@brogovroom3174 2 года назад
Thus us the best hobby for students as it would kill time and we only get 1- 2 hours of free time
@jringhisen
@jringhisen 3 года назад
Wonderful example of skill making an affordable model amazing. Would love to see some tutorial videos and reviews of how you chose your materials (paints, tools, etc).
@johnpaulguevara3977
@johnpaulguevara3977 3 года назад
This is insulting. This is THE entry grade? Looks better than mg MG. My goodness the patience and skill. Great work.
@ironingot7768
@ironingot7768 3 года назад
that real grade decals totally changes the how entry grade looks
@audbgsr457
@audbgsr457 3 года назад
Entry Grade? more like EXTREME Grade!
@mako4075
@mako4075 3 года назад
エントリーグレードに見えない! やっぱりナナハチはカッコいい‼️
@Help_MehL3
@Help_MehL3 2 года назад
When I fully upgrade my starter weapon
@Sophie_519
@Sophie_519 Год назад
sugoii!!! arigatou ,,, learnt a lot from your build~
@Remyinajar
@Remyinajar Год назад
The gray primer made me want a G-3 gundam that wasn't p-bandai
@Roachinator3000
@Roachinator3000 3 года назад
When you don’t feel like buying a Real Grade
@natthakitrawinarasawad817
@natthakitrawinarasawad817 10 месяцев назад
Bro roast me in 78-2 language. 🤣😂
@darkerentertainment9270
@darkerentertainment9270 3 года назад
That looks like Real Grade
@Shiro_47
@Shiro_47 2 года назад
Now that’s definitely an “upgrade” from entry to master
@Shmeezer93
@Shmeezer93 Год назад
How did u make both sides look so accurate?
@JakartaSeptember
@JakartaSeptember 3 года назад
Amuro Ray: Arigatou..
@ezgaphi
@ezgaphi 4 месяца назад
Why am the one to like this comment?
@SlayerGodOfDeath
@SlayerGodOfDeath 11 месяцев назад
from cheap one to ... wtf just happen 🤣😂
@KarmaSXQ
@KarmaSXQ 3 года назад
How can entry kit look like small PG XD
@alisyed8399
@alisyed8399 Год назад
But is it still 7 $ even after buying all that stuff?
@moldywaffle69
@moldywaffle69 3 года назад
I have a lot of free time should I build models?? I love Gundam.
@gatomeong
@gatomeong 3 года назад
yes
@Jason-ut3ou
@Jason-ut3ou 3 года назад
Definitely it can be intimidating but just got for it, I watched videos on weathering techniques and tools I should get for about two weeks and build a High Grade Zaku Origins suit, it turned out great did some battle damage to it, weathered it and gotta say for my first time it stacks up to people who have been doing it for years. I put about 50 hours into it.
@mannyfresh1087
@mannyfresh1087 Год назад
Ah yes the Mazda rx-78-2
@hansenderviotedjakusuma2971
Man make a entry grade like it's Master Grade
@maxwelltv6581
@maxwelltv6581 3 года назад
This i the perfect way to build gunpla with a real grade decal it look's so cool with it it with the perfect detail's also in your way building gunpla is so perfect to build in that way i love your good content
Далее
Дикий Бармалей разозлил всех!
01:00
Every Main Gundam’s First Launch (1979-2023)
51:54
Просмотров 1,8 млн
Gunpla Custom - 7$ Entry Grade RX-78-2
21:12
Просмотров 275 тыс.
I made this CHAMPION GUNDAM MODEL. 【GM SNIPER PRO】
11:11