Машина за 200$ , Saturn SL1 Pan Zmitser  

Поверь,видео ремонта этого Сатурна будет очень интересно!

наконец то, звук шикарный,картинка тоже) Thank you! Good luck!

Люблю старые американские корыта за их нетрадиционную внешность и харизму!!! Конкретно по этому авто запчасти как на ВАЗ классику в Рашке!!!

С первых дней с каналом. Рад что все наладилось и все хорошо!

Заметно по звуку, что новая камера. Комфортно тебя смотреть Дима, поздравляю!

In 2001, a special yellow SC2 coupé model was also built. The model was officially named "Limited Edition", but soon became known as the "Bumblebee Edition". 99 were produced, each with a certificate of authenticity. The "Bumblebee Edition" included embroidered headrests, black leather interior with yellow leather inserts on the seats and door panels, black roof and mirrors, number designation inside fuel filler door and certificate of authenticity. These are not to be confused with the regular issue Yellow Sport Coupe. 2001 also saw a "10th Anniversary Edition" (also known as the "Silver Anniversary Edition") SL sedan model. 1,000 of these vehicles were made; all in SL2 trim with "SILVER" finish. The car commemorated the 10th anniversary of the Saturn SL's production. Included features were black perforated leather interior with silver stitching, embroidered Saturn 10th Anniversary" head rests, unique black (with pearl brite perimeter finish) Saturn badges, silver faced gauge cluster, rear spoiler and restyled 15" premium alloy "Teardrop II" wheels with silver painted inlays. Options included ABS, side curtain airbags, sunroof, driving lights and embroidered "Saturn 10th Anniversary" floor mats. Another Limited SL for 2001 was the "Bright Red" sedan. Approximately 664 were built. Right hand drive In addition to the above-mentioned "Special Edition" Saturns; there was also the 1999 - 2001 Saturn SWP "Postal" Station Wagon that were produced (450 in 1999), intended to be marketed to rural route mail carriers. These station wagons were right hand drive vehicles. There were also a limited number of Saturns that were exported to Japan as right hand drive vehicles circa between 1997 and 2000. Aside from having the steering wheel on the other side, Japanese market Saturns were also fitted with slightly different light units. The rear lamps had amber turn signals and the front indicators were mounted closer to the corners rather than inboard. The Saturn faced a hard time in Japan, where it played directly into the strengths of the Japanese manufacturers, comparing unfavorably with better-priced and more competent Japanese compact cars. The interior, especially, received criticism. A mere 602 units were sold in Saturn's first year in Japan (April to December 1997). Another problem was that Japanese car dealers have always excelled at customer service; this meant that Saturn's main sales argument in the United States was meaningless in the Japanese market. The introduction of Saturn was also ill timed, as the economy was in the midst of a recession due to the effects of the 1980s "bubble economy". As the Japanese had less money to spend on "luxury goods", as imported products are regarded, Saturn found very few buyers. Theft The 1995 Saturn SL was the most stolen vehicle in 2003, while the 1994 SL took third place in CCC Information Services's 2003 most stolen vehicle report. According to the Lynnwood, Washington police department, when use of the key wears on the door and ignition mechanisms, a filed blank key can be used to open the door and start the engine. Racing Saturn SC's competed in the SCCA World Challenge in the 1990s, winning several races from 1995-1997. Several S-series cars have been used as rally race cars

поздравляю с приобретением))удачи в востановлении апарата))))будем ждать новых видео:)

Привлекательная цена! Отличное видео!

приличный сохран,для 2001 года. удачи и лайк!

сатурн был под джиемом, но вроде как работал автономно, со своими инженерным и дизайнерским бюро, после начали беднеть, и продовали опель под маркой санурн. у еще был электромобиль! блок алюминь, башка тоже, как бы там не было перегрева и все это дело не повело(( болты в алюм закручивать потом осторожно надо, вкладыши коленвала будешь менять? пробег все таки не малый!

You were right,Some of 1996-1998 Saturn SL1 & SL2 & SW1 & SW2 were eating oil. That are some of the complains many people expressed. That car have one serpentine belt,that turns all accessories like water pump.alternator/generator, & power steering pump.

ХОРОШАЯ ИНВЕСТИЦИЯ, МОЛОДЕЦ. УДАЧИ, ТАК ДЕРЖАТЬ.

Обязательно делай видео ремонта Сатурна! Очень интересно! Ты молодец! :)

Дима,если эта машина в Штатах не в почёте,то наверняка её после ремонта тяжело будет продать,даже за дёшево?

Дмитрий, благодарю за видео! Очень прошу, снимите ремонт данного автомобиля)

Купил такой в России в Москве теперь не могу найти з/ч можно как-то через вас заказать???? или даже б/у мне ходовая нужно ?????

снимай про сатурн, всё равно интересно! и скинь ссылку на компресометр, нужная вещь)

The best place for parts are salvage yards or junk yards. Also you can learn design by disassembling cars at salvage yards. 2002 Saturn SL1 are rated at 100 horses engine. Saturn SL2 engines are rated at 124 horses.

Second generation SL and SW 1996-1999 The second generation SL and SW were made from model year 1996 to 1999. The redesign resulted in a more curvaceous look for the SL/SW, which gave a slight increase in interior room and doorway size as well as an updated appearance. Mechanically, very little was changed from the previous model. The biggest changes for 1996 were the OBDII PCM, an all new sequential fuel injection setup that utilized a first ever "compress sense" cam sensor setup (cam sensor input was achieved by the ignition module sensing the amount of amperage it took to fire cylinder number 4. More amperage meant TDC compression, less meant TDC exhaust) in lieu of a conventional camshaft position sensor. Also full spark control (timing and firing of the ignition coils) was achieved solely in the engine control module as opposed to the ignition module. A few minor changes were made in the mid-1998 model year. Due to multiple complaints of noise from the trip odometer on the 1995-early '98 gauge cluster, a new cluster with a digital odometer was introduced, rear disc brakes were deleted as an option due to high cost and very little improvement in braking performance over the conventional rear drum setup, the performance/normal mode switch was deleted from the transmission in lieu of new ECU software that learned the driving patterns of the operator and adjusted shift patterns accordingly, and a new larger muffler was introduced to reduce engine exhaust NVH levels. Models made late in the 1999 model year (sometimes referred to as "1999.5" models) received improvements to both SOHC and DOHC engines that did not affect power output, but did smooth out some of the harshness and tendencies toward oil consumption associated with them. These changes included revised pistons (SOHC engines now used the same (flat top) pistons as the DOHC engines instead of the old dished pistons), connecting rods, crankshaft counterweights and the now narrower twin cam cylinder head featured a new roller rocker setup with hydraulic tappets and roller cams replacing the conventional bucket lifter setup of the previous engine. Fuel economy of these refined models also saw a measurable improvement. Also introduced in 1999 for vehicles equipped with California emissions, was a different exhaust manifold that housed an upstream catalytic converter (this converter heated up much faster than the conventional unit and decreased exhaust emissions faster) and provisions for an air injection reaction system (this injected fresh air into the exhaust to reduce hydrocarbons at start up, and help the oxygen sensors and catalytic converters reach operating temperatures faster). These vehicles were made to meet the all new CARB ULEV standards for the 1999 model year. These changes, among others, were subtly introducing the differences of the third generation S-series. Second generation SC 1997-2000 Saturn SC The second generation SC was made from model year 1997 to late 1999. The second generation SC also moved to the longer wheelbase of the SL/SW models, resulting in an equal wheelbase across all models. The redesign resulted in a more curved look for the SC, which gave a slight increase in interior room and doorway size as well as an updated appearance. Mechanically for 2000, the coupes also saw the introduction of the plastic intake manifold. For the 1999 model year, a small rear-hinged third door was added to the driver's side. Although the third door allows passengers to enter and exit the rear seat without sliding the driver's seat forward, it was intended to provide easier access to the rear seat for parcels as the door's latch is on its front edge, and is thus inaccessible unless the front door is open. This prohibits a user from opening (or closing) the rear door if the front door is not open. The SC1 also lacked a rear sway bar.[1] Third generation SL and SW In 2000, the second generation was facelifted for the final time before the S-Series was discontinued in 2002. This became known as the third generation of the S-Series. The third generation featured many style changes to the exterior and interior, as well as some mechanical and electronic differences. The interior was completely redesigned, featuring a completely different dashboard design from previous generations. This new dash featured an electronic odometer, which did not break like the first generation's mechanical odometer. The 3rd generation was also the only S-Series to use a standard sized Double DIN stereo. The third generation also used a refreshed design seat set for the interior as well for the SL2, SW2, and SC2 models. These seats have more padding than previous years. The SL1, SW1, and SC1 seats remained the same for the base models of the car. In addition to the engine changes at the end of the 2nd generation, the original aluminum intake manifold was replaced by a plastic intake. The third generation also was the first Saturn to make use of a Body Control Module (BCM), and a Powertrain Control Module (PCM) in tandem with each other. The BCM controlled all interior functions, as well as gauge functions, illumination of the dash equipment, mileage displayed on the odometer, and other functions. This allowed the PCM to be relocated under the hood of the car behind the battery. In the 3rd Generation, the PCM is strictly for controlling the transmission and engine of the vehicle. It has no control over any other function besides the running and emissions control of the car. The wiring harness was changed in several areas on the interior and inside the engine compartment, presumably to allow the relocation of the PCM and the addition of a BCM. Third generation SC 2001-2002 Saturn SC The third generation of Saturn SC maintained the familiar SC1 and SC2 monikers. They were essentially identical to the second generation SC in all terms except appearance where minor updates were done to improve the lines[4] and a PCM and BCM were added. For the final generation a special suite of options called the Saturn Expression Series was introduced.[5] These options included a HKS intake and exhaust, American Racing Wheels 15 inch alloys, GT Styling ground effects and rear spoiler, and Progress Group suspension springs.[6] A special Homecoming edition of the SL2 was released for 1994. It had special Pearl White paint (a "silver-tint" pearl, shared with Cadillac models of this year), black Saturn emblems, spoiler, 15-inch (380 mm) "teardrop" wheels, anti-lock four-wheel disc brakes, grey leather/cloth interior, rear headrests, fog lamps, and power locks and windows. Options included a sunroof, CD player, and the 4-speed automatic with traction control. In 1998 and 1999, prospective buyers of a red or white SC2 had the option of purchasing the "Black Top Coupe Package" for $225.00 (US). The models were referred to as the "Red Hot Coupe" or "White Hot Coupe", based on the exterior color. The package came with a black roof panel, black outside rear view mirrors, black emblems, white face gauges and black accented teardrop wheels. These are extremely rare. In 1999, a second Homecoming Edition was produced in a special "Mint Color" with tan leather interior, special off-white gauge faceplates, and black Saturn badges to commemorate the second "Homecoming" visit to the Spring Hill, Tennessee manufacturing facility. The 1999 Homecoming Edition also had the same features offered as the 1994 Homecoming Edition. .

Добрый день Дмитрий а в США где запчасти покупают? На eBay или есть что-то похожее на exist.

Автору за интересное видео и удовольствие от просмотра большое спасибо. Давайте дружить каналами!

Дмитрий, хочу переехать в США в Сакраменто. Как можна найти тебя в соцсетях и пообщятся ?!

Дэу эсперо по моему немного другая. С боку очень похожа на Опель омегу последнюю, так же жопа очень похожа и салон тоже очень похож. Размерами меньше но Опель чувствуется.

Здравствуйте! даже интересно стало что за камера?

Интересно будет, двигатель простой, а машина выделяется многим, про пластик не знал. У GM очень надежные узлы. Будет возможность,удели пару слов про buick park avenue, regal. У них 3.8 мегаудачный и надежный. Запчасти верно, копейки стоят.

Не давно приобрёл себе Saturn series s 1998г.в за 3200$ в России ,и был удивлён что нет ржавчина, даже где детали из

Здравствуйте ! Интересно , а какая цена страховки на данный автомобиль и вообще автомобили данной ценовой категории ?

Подскажите, задумываюсь о покупке такого же (СНГ), есть ли смысл брать? как у нас обстоят дела с запчастями? Вообще реально ли ее обслужить в случае полной попы?

У нас в Хакасии была одна такая же , все ржали . Она один раз в аварию попала и вся рассыпалась. На свалке щас где то валяется. ))))

Дмитрий, можете рассказать про title status авто, стоит ли покупать авто без clean статуса?

First generation SL and SW The first generation SL and SW were constructed from model year 1991 to 1995. The first Saturn to leave the assembly line in the Spring Hill, Tennessee factory was on July 30, 1990, the same day that then-CEO of GM, Roger Bonham Smith, retired. It was maroon with a tan interior. Originally there were two available trim levels. The SL1 trim level featured a SOHC 1.9 L I4 LK0 engine that was rated at 85 hp (63 kW), which was rated at 27 mpg-US (8.7 L/100 km; 32 mpg-imp) city, 37 mpg-US (6.4 L/100 km; 44 mpg-imp) Highway. The SL2 trim level featured a DOHC 1.9 L I4 LL0 engine that was rated at 124 hp (92 kW), 24 mpg-US (9.8 L/100 km; 29 mpg-imp) city, 34 mpg-US (6.9 L/100 km; 41 mpg-imp) Highway. 1991-1992 model year Saturns featured the base "SL" available with a manual transmission only, an "SL1", "SL2", and "SC". For model year 1993, the line expanded to include the SW1 and SW2 wagons, which were mechanically identical to their SL1 and SL2 counterparts. All models received an interior redesign for 1995 with a new dashboard and dual airbags. All S-Series cars were offered with either a 5-speed manual transmission or a 4-speed automatic transmission. The automatic featured a performance setting which gave crisper shifts at a higher RPM, and a setting for traction in which the transmission would stay in 2nd gear from a stop for more controlled take-offs. The Saturn transmissions in the DOHC-equipped vehicles were geared to enhance acceleration, while the SOHC-equipped model transmissions were geared toward economy. The base SL1 engine was upgraded to the 100 hp (70 kW) L24 engine for the 1995 model year. The two base engines were mechanically identical, save for the upgrade from TBI to non-sequential MPFI. The 100HP engine also featured improved fuel economy of 26 mpg-US (9.0 L/100 km; 31 mpg-imp) city, 40 mpg-US (5.9 L/100 km; 48 mpg-imp) Highway The S-Series had a 12.8 US gallons (48 L; 11 imp gal) fuel tank, which means that both cars got around 384 miles (618 km) on a single tank based on average of 32 mpg-US (7.4 L/100 km; 38 mpg-imp). Owners of the base model typically report real-world fuel mileage of about 38-41 mpg-US (6.2-5.7 L/100 km; 46-49 mpg-imp) on the highway with the manual transmission. First generation SC[edit] The first generation SC was made from model year 1991 to 1996. Originally only one trim level, SC, was available, with a DOHC 1.9 L I4 LL0 engine that was rated at 124 hp (92 kW). For 1993, the original SC trim level was renamed SC2, and an SC1 trim level was introduced. For 1994, the SC1/SC2 got revised power door locks and a recalibrated automatic transmission. The first generation SC2 received a minor refresh for 1995 in which the lower front bumper, and taillights were redesigned, and the interior got a new dashboard with dual airbags. The SC1 featured an SOHC 1.9 L I4 LK0 engine that rated at 85 hp (63 kW). The SC1 engine was later upgraded to the 100 hp (70 kW) L24 engine for the 1995 model year. The first generation SC1 shared its front fascia with the SL and SW rather than the SC2, and also lacked a trunk lid reflector and a rear stabilizer bar.

Дмитрий,как Вы без ямы в гараже ремонтируетесь?! Или где-то рядом поъёмник,эстакада?..

Дмитрий, подскажи пожалуйста на каком сайте можно заказать запчасти в Россию со штатов , у меня Сатурн ск-1

en.m.wikipedia.org/wiki/Saturn_S-Series википедия пишет что тачка была разработана именно Сатурном, и потом платформа была распространена по концерну GM. так что видимо это эсперо похожа на Сатурн, а не наоборот

Да,да давай видео ремонта.И к стати у нас по телику била передача про американских копов и там вставляли кусок твоего видео когда твоему ребенку коп наклейку шерифскую заезду подарил.

Пишу из 19го года, смотрел бу машины на продажу в Москве, наткнулся на такой вот Сатурн на палочке. Вариант интереснее, чем ржавые корейцы, вот думаю, брать, не брать

Рулевое колесо можно попробовать замазать Sugru, а потом кожаную оплетку навесить.

перегрев двигла, ГБЦ повело(стала горбылем), в следствии продуло прокладку. Ремонт не сложный.

Here are more information about the Second Generation 1996 to 1999 The second generation SL and SW were made from model year 1996 to 1999. The redesign resulted in a more curvaceous look for the SL/SW, which gave a slight increase in interior room and doorway size as well as an updated appearance. Mechanically, very little was changed from the previous model. The biggest changes for 1996 were the OBDII PCM, an all new sequential fuel injection setup that utilized a first ever "compress sense" cam sensor setup (cam sensor input was achieved by the ignition module sensing the amount of amperage it took to fire cylinder number 4. More amperage meant TDC compression, less meant TDC exhaust) in lieu of a conventional camshaft position sensor. Also full spark control (timing and firing of the ignition coils) was achieved solely in the engine control module as opposed to the ignition module. A few minor changes were made in the mid-1998 model year. Due to multiple complaints of noise from the trip odometer on the 1995-early '98 gauge cluster, a new cluster with a digital odometer was introduced, rear disc brakes were deleted as an option due to high cost and very little improvement in braking performance over the conventional rear drum setup, the performance/normal mode switch was deleted from the transmission in lieu of new ECU software that learned the driving patterns of the operator and adjusted shift patterns accordingly, and a new larger muffler was introduced to reduce engine exhaust NVH levels. Models made late in the 1999 model year (sometimes referred to as "1999.5" models) received improvements to both SOHC and DOHC engines that did not affect power output, but did smooth out some of the harshness and tendencies toward oil consumption associated with them. These changes included revised pistons (SOHC engines now used the same (flat top) pistons as the DOHC engines instead of the old dished pistons), connecting rods, crankshaft counterweights and the now narrower twin cam cylinder head featured a new roller rocker setup with hydraulic tappets and roller cams replacing the conventional bucket lifter setup of the previous engine. Fuel economy of these refined models also saw a measurable improvement. Also introduced in 1999 for vehicles equipped with California emissions, was a different exhaust manifold that housed an upstream catalytic converter (this converter heated up much faster than the conventional unit and decreased exhaust emissions faster) and provisions for an air injection reaction system (this injected fresh air into the exhaust to reduce hydrocarbons at start up, and help the oxygen sensors and catalytic converters reach operating temperatures faster). These vehicles were made to meet the all new CARB ULEV standards for the 1999 model year. These changes, among others, were subtly introducing the differences of the third generation S-series. Second generation SC[edit] 1997-2000 Saturn SC The second generation SC was made from model year 1997 to late 1999. The second generation SC also moved to the longer wheelbase of the SL/SW models, resulting in an equal wheelbase across all models. The redesign resulted in a more curved look for the SC, which gave a slight increase in interior room and doorway size as well as an updated appearance. Mechanically for 2000, the coupes also saw the introduction of the plastic intake manifold. For the 1999 model year, a small rear-hinged third door was added to the driver's side. Although the third door allows passengers to enter and exit the rear seat without sliding the driver's seat forward, it was intended to provide easier access to the rear seat for parcels as the door's latch is on its front edge, and is thus inaccessible unless the front door is open. This prohibits a user from opening (or closing) the rear door if the front door is not open. The SC1 also lacked a rear sway bar

Нашему человеку дай только что-то починить. Сам чиню торговое оборудование. Я так думаю, мы вышли с совковой бедности, где ничего толком не было, и вот вам результат.

You will have to learn more english to understand these videos. Saturn Training Video - Chassis Systems ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-V1qKUq3-pKQ.html Saturn Training Video - Engine Repair ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-rWaQ98Bd0cw.html

Хотя бы немного изучил вопрос. Сатурн S-серии тем и хорош, что строился с нуля по принципиально другой корпоративной культуре, направленной на качество и удовлетворённость клиентов.

Какой камерой снимаете?

удачи тебе во всех начинаниях,от души желаю успехов.только не становись пожалуйста каким-то соц-адоптатором,родами в америке и всякой х....й.они уже достали.лайк однозначно.

200 долларов это два рабочих дня американца? Интересно сколько он стоил новым.

a на мерсы есть аналоги запчастей?

Хороший аппарат за эту сумму.

Сатурны довольно надёжные тачки. Концерт GM всё-таки ..

Как это не интересно аудитории. Дима снимай еще как интересно

это где-то 8л.\100км.а приус где-то 4-6л.на сотню!

не "жрет на 2 майла меньше", а проходит на 2 мили больше на 1 галлоне)

Well you did not look close enough! You really have to look ! Saturn S-Series From Wikipedia, the free encyclopedia Saturn S-Series 1996-1999 Saturn SL2 Overview Manufacturer Saturn (General Motors) Production 1991-2002 Assembly United States: Spring Hill, Tennessee (Spring Hill Manufacturing) Body and chassis Class Compact car Layout Transverse front-engine, front-wheel drive Platform GM Z platform Chronology Successor Saturn Ion The Saturn S-Series are a family of compact cars from the Saturn automobile company. This was the first series of Saturn vehicles. The automobile platform, the Z-body, was developed entirely in-house at Saturn and shared very little with the rest of the General Motors model line. It implemented a spaceframe design, also seen on some Pontiacs, which meant that the side panels did not carry load and could use plastic pieces instead of metal. These polymer panels were dent-resistant-something that remained a selling point for Saturn until the brand's demise. The S-series was sold from the fall of 1991 through the end of the 2002 model year, with partial redesigns in 1996 & 2000 (sedans) and 1997 & 2001 (coupes). The S-series debuted with SL (“sedan level”) models in 1991 for the 1992 model year, a 2-door sports coupe designated SC joined for the 1992 model year and the SW (“sedan wagon”) joined the lineup for 1993. Taiwan and Japan were the only two Asian countries to import Saturns. From 1992 to 1996, the first- and second-generation sedans plus the first-generation coupes were sold in Taiwan. From 1996 to 2003, the second-generation versions were sold in right-hand drive in Japan, and some Toyota Netz dealerships, and former Isuzu dealerships did offer Saturn products until 2001. The first generation vehicles were not in compliance with Japanese Government regulations concerning exterior dimensions and maximum engine displacement requirements, while the second and third generation sedan and wagon were, however, the coupe was not for all generations. Canada imported all available Saturn models from 1992 onwards. A change partway through the 1999 model year gave the SC a small suicide door on the driver's side. This type of door had previously been used in extended cab pickup trucks, but was an innovation in coupe design.[1] The S-series was replaced by the larger Saturn Ion in 2003, which was unable to match the S-series' sales numbers before the end of its own production at the end of 2007. Coupes and sedans equipped with the base single overhead cam engine and a manual transmission were among the most fuel-efficient cars available in the United States when they were produced, reaching 40 miles per US gallon (5.9 L/100 km; 48 mpg-imp) in EPA highway tests at the time (this would likely translate to 36 miles per US gallon (6.5 L/100 km; 43 mpg-imp) under current methodologies).[2]

These two headlights are called DRL. They are High Beam Headlights. DRL - Day Running Lights. During the day light hours these are constantly on at 50% of their power full power. At night they will function normally together with low beam lights that are on outside. While using parking hand brake,the light will go out! If you really want, you can disconnect them,but you need to find the correct fuse in the fuse box. The general idea GM Had is to for reason of safety to turn these light on all the time. The loss of energy are easily compensated by 85 amp alternator that give plenty of power to many other functions. How I know so many details. I am owner of three of these cars. But,mine cars are all with twin cam engines. 1996 Saturn Wagon SW2 , 1998 Saturn Wagon SW2 and 2002 Saturn Sedan SL2. My 1996 since bought brand new in May of 1996 have now logged over 177500miles. These cars like maintenance & more maintenance. Religious maintenance Early models back since 1991 to 1999 like to eat a lot of oil.Just keep checking & adding motor oil & you will be just fine. That is dictated by the design of the engine. Very high torque developed from only 1.9liter motor. By constantly replenishing with fresh motor oil,the engine will last longer. Engine actually vaporizes motor oil into fine mist inside the engine block under very hot temperatures. All Saturn S models like to run very hot during normal operating conditions. Saturn Corporation worked very hard to improved the design and engines were improved for model year 2000. Single & Twin Cam engines versions are available, with 5 speed manual transmission & optional four speed automatic gear box. The rear suspension of SL2/SW2/SC2 have an additional rear stabilizer bar. Plus 185/65SR15 tires with optional 15 inch cast aluminum rims but only for SL2/SW2/SC2 instead of for SL1 that had 14inch steel wheels. Yearly SL1 from 1991 to 1996 had 175/70/14 or later modes were upgraded to 185/65SR14 tires for Saturn SL1 Switching to larger rims will not be very useful, for lower line SL1/SW1/SC1 because these cars have different gear boxes that fit the ability of the engine to choose the right gear at the correct time. SL1 have MP6 automatic gear box, SL2 have MP7 automatic gear box. They have completely different set of gear ratios. Simular situation exists with 5 gear manual transmissions under designation MP2/MP3. Google if you want more information on these cars. AS far as I know these cars were exported to only two other counties,back in 1996-1998 they were Japan & Canada. Everything on these cars are made to metric standard. Made in Springfield, Tennessee.USA from 1991 to 2002. Saturn Ion went into production at Springfield,Tennessee after production of S models have ended in 2002. web side www.saturnfans.com/forums/showthread.php?t=14446 contains more information on history & have many repairs chronicles. Including answers to many questions from Saturn mechanics that use to service these automobiles in the past. These cars are know under the S-Series Saturn's they were produced in coupe,sedan & wagon variants. All from one & the same platform 102,4 inches wheelbase for sedan/wagon and 99.2 inches for coupes. Platform designation Zeta.

Баковины похоже на опель омега 95-2001

А правда что у этой машины кузов пластиковый ?

30 миль на галлон - это 7,84 литра на 100 километров ......

магнитом можно проверить

может крыша проклеена просто?

В России самый дешёвый вариант 1993года 1.5 тысяч долларов требующий конкретно ремонт и денег. Как-то так.

That why it is $200.00. Because only for some body that can fix that vehicle.

примерно 8 литров на 100

200к миль это 320+к километров

These cars have DRL . DRL - What does DRL stand for? Daytime Running Lights. en.wikipedia.org/wiki/Daytime_running_lamp

Блин, Дмитрий, ну честно это не для наших а АМЕРИКЕ!!!!!!!!

Зачем нам Сатурн в России? У нас в России есть Дэу Нексия

For more original information on all Saturn Models that were produced in United States go to link bellow! www.saturnfans.com/forums/showthread.php?t=14446 For exemple www.saturnfans.com/forums/showthread.php?t=223319 Some even more knowledgeable people answer questions from Saturn automobile owners. You need to register to enter the forums. and ask questions !

Here you can watch a guy that became Saturn Professional because he serviced so many of these cars in the past. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-sNQC_24-Qvc.html&feature=em-share_video_user ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-KaKXFcDI2rU.html There are many other videos about servicing Saturn S- Series by richpin06a By Rich Pin. The cars in his videos that appear most often are the second generation Here are more information about the Second Generation 1996 to 1999 The second generation SL and SW were made from model year 1996 to 1999. The redesign resulted in a more curvaceous look for the SL/SW, which gave a slight increase in interior room and doorway size as well as an updated appearance. Mechanically, very little was changed from the previous model. The biggest changes for 1996 were the OBDII PCM, an all new sequential fuel injection setup that utilized a first ever "compress sense" cam sensor setup (cam sensor input was achieved by the ignition module sensing the amount of amperage it took to fire cylinder number 4. More amperage meant TDC compression, less meant TDC exhaust) in lieu of a conventional camshaft position sensor. Also full spark control (timing and firing of the ignition coils) was achieved solely in the engine control module as opposed to the ignition module. A few minor changes were made in the mid-1998 model year. Due to multiple complaints of noise from the trip odometer on the 1995-early '98 gauge cluster, a new cluster with a digital odometer was introduced, rear disc brakes were deleted as an option due to high cost and very little improvement in braking performance over the conventional rear drum setup, the performance/normal mode switch was deleted from the transmission in lieu of new ECU software that learned the driving patterns of the operator and adjusted shift patterns accordingly, and a new larger muffler was introduced to reduce engine exhaust NVH levels. Models made late in the 1999 model year (sometimes referred to as "1999.5" models) received improvements to both SOHC and DOHC engines that did not affect power output, but did smooth out some of the harshness and tendencies toward oil consumption associated with them. These changes included revised pistons (SOHC engines now used the same (flat top) pistons as the DOHC engines instead of the old dished pistons), connecting rods, crankshaft counterweights and the now narrower twin cam cylinder head featured a new roller rocker setup with hydraulic tappets and roller cams replacing the conventional bucket lifter setup of the previous engine. Fuel economy of these refined models also saw a measurable improvement. Also introduced in 1999 for vehicles equipped with California emissions, was a different exhaust manifold that housed an upstream catalytic converter (this converter heated up much faster than the conventional unit and decreased exhaust emissions faster) and provisions for an air injection reaction system (this injected fresh air into the exhaust to reduce hydrocarbons at start up, and help the oxygen sensors and catalytic converters reach operating temperatures faster). These vehicles were made to meet the all new CARB ULEV standards for the 1999 model year. These changes, among others, were subtly introducing the differences of the third generation S-series. Second generation SC[edit] 1997-2000 Saturn SC The second generation SC was made from model year 1997 to late 1999. The second generation SC also moved to the longer wheelbase of the SL/SW models, resulting in an equal wheelbase across all models. The redesign resulted in a more curved look for the SC, which gave a slight increase in interior room and doorway size as well as an updated appearance. Mechanically for 2000, the coupes also saw the introduction of the plastic intake manifold. For the 1999 model year, a small rear-hinged third door was added to the driver's side. Although the third door allows passengers to enter and exit the rear seat without sliding the driver's seat forward, it was intended to provide easier access to the rear seat for parcels as the door's latch is on its front edge, and is thus inaccessible unless the front door is open. This prohibits a user from opening (or closing) the rear door if the front door is not open. The SC1 also lacked a rear sway bar

Майл - Миля - 1.6км

Actually you do not know the whole story of Saturn automobile & Saturn Corporation that were created by General Motors starting from scratch or a complete zero. Spring Hill manufacturing plant,in Spring Hill, Tennessee were built for only one purpose to build & assemble Saturn S-series of automobiles. Building of the factory started back in 1985,when I was living in suburbs of Detroit Michigan. I was listening to car radio,when I heard that General Motors are going to spend 5 billion dollars to build buildings & assembly line of New Manufacturing facility in Spring Hill Tennessee ! Where they (GM) are going to assemble A New kind of car, From a new kind of Company! The name of company was "Saturn Motor Company". www.saturnfans.com/forums/showthread.php?t=14446

похоже на 16 клап

А ещё сатурна все железные детали ложные

Пипец, какой ведущий. Зачем?

Вам не жалко было свое время и знания тратить на этот неликвид ?