Make sure that the hard disk is in the correct order for the boot phase. One of the basics of BIOS programming is the arrangement of the boot phase in any motherboard. By pressing Delet, F12 or F9, in the next step we enter Boot and then modify the options to the next first Boot CD-ROM Scand Boot hard disk and this is the option that concerns us now. Press F10 to modify and restart the computer to remove any additional components that have been connected To the computer, you may have connected some add-ons to your computer, such as a flash drive, gaming arms, headphones, or an additional hard disk in any of the device ports, as this may lead to a failure to boot. Of the hard disk cables and their currency naturally is one of the important steps to solve this problem, and the majority of solving the problem lies in those steps, which are to make sure that the hard disk works normally and that the connections, whether SATA cable and the definition of the SATA cable here is the link between the hard drive and the motherboard and that it works normally and it is better to change it with a new cable, also make sure of the power cable connected to the hard drive whether it works or not and change it with another cable to make sure it works normally. As for the laptop, it is mostly that the hard The disk has moved from a place and needs to be reinstalled. Weak power supply. Power supply is one of the very important pieces, contrary to what some believe that it is a conductor of electricity only, but the truth is that it is the most important piece of the computer because every piece in the computer, whether the laptop or the desktop, has a certain wattage to operate it and it must From the availability of that watt, or problems occur due to poor feeding of the power supply and some parts may not work because of that, and problems occur. If you have confirmed the previous steps, you should try another power supply to install a new Windows. But it should be noted that the copy of Windows should be changed to another copy completely, and the use of a program to burn Windows is completely different. It is recommended to use a copy of Windows that is raw and not modified. The modified copies may have some defects that lead to This problem is the damage of the hard disk, the last reason for this problem is the damage of the hard disk, and among these problems is the following of a ticking sound from the hard disk, and this problem indicates that the needle of the hard disk does not work properly. The data entry of the hard drive is damaged
4 окт 2024
