✨ GMC Yukon / Chevy Tahoe - Easy Blend Door RESET ✨

Scott The Fix-It Guy - Appliance Repair Videos

Подписаться 60 тыс.

Просмотров 279 тыс.

50% 1

✨ GMC Yukon / Chevy Tahoe - Easy Blend Door RESET ✨
NO PARTS NEEDED - JUST NEED A PAIR OF PLIERS AND 5 MINUTES
FIXES THE FOLLOWING:
* Noisy blend door.
*Blows hot air when it should be Cold.
*Blows cold air when it should be Hot.
Click Here If You Need To Order A New Blend Door Actuator: amzn.to/3SHe6FN
It may just need calibration / Reset. If that doesn’t work you can order a new one.
✨ If the video was helpful, remember to give it a Thumbs Up 👍 and consider Subscribing. New videos every Saturday ✨
-Subscribe Here: / @scottthefixitguychannel
🛠- Do You Need Any Additional Help? Become A Member of Our Channel Today and Get LIVE HELP from Scott With Your Appliance Repair. Pick #1 FIX-IT FAN for Just $4.99 and get Text, Zoom, Email or FaceTime Live Help. Non-Members pay $45.00 for Live Help. Just $4.99 for Channel Members. Click Here to Join Today: / @scottthefixitguychannel
-Facebook: / scottthefixitguy
-Twitter: / scottthefixitgy
-Instagram: / scottthefixitguy
-RU-vid Channel: / scottthefixitguychannel
-If My Advice Has Helped You…
Please Click Here To Donate: www.paypal.com/cgi-bin/webscr...
Donate with Venmo - Click Here:venmo/u/Scott-Flint-1
-GREAT PLACE TO ORDER O.E.M. Genuine Parts for Your Appliance - Click Here: fix.pxf.io/MmrxYY
-Need Expert Appliance Repair Help Today? Click Here:asqme.com/@scottthefixitgu
-Good Place to Buy Parts: bit.ly/3wD4L5W
-List of Tools used by Scottthefixitguy: • ✨ Scott The Fix-It Guy...
-Need More Expert Help with Your Repair? Click Here To Schedule a 15 Minute Meeting with Me Using Zoom 💻 : calendly.com/scottthefixitguy
Disclaimer:
Because factors beyond the control of Scottthefixitguy, I cannot guarantee against improper use or unauthorized modifications of this information. Scottthefixitguy assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. Scottthefixitguy recommends safe practices when working on appliances and vehicles and or with tools seen or implied in this video. Due to factors beyond the control of Scottthefixitguy, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not Scottthefixitguy.
Thank you 😊 *
*
🐔 Check Out Our New Channel Dedicated To Showing How To Raise Your Own Backyard Chickens: / @raisingbackyardchickens ***
***
Scott The Fix-It Guy - Appliance Repair Videos Do you need More Appliance Repair Direct Help from Me? Visit me at:AsqMe.com@ScottTheFixItGu and I'll help you get your appliance working again quickly.

Авто/Мото

Опубликовано:

3 июл 2017

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 95

@markschultz2684 10 месяцев назад

Perfect. Worked like a charm

@ScottTheFixItGuyChannel 9 месяцев назад

Great to hear!

@davidkeppler37 6 лет назад

THANK YOU!!!! I tried everything with fuses and other hints. I left the battery unhooked for more than 10 minutes. The trick came from you... when I rebooked the battery, DO NOT start the vehicle but let the power flow and wait about 5 minutes while all of the actuators reset. Everything is back to normal. 👍

@ScottTheFixItGuyChannel 6 лет назад

Excellent, thank you👍

@fritzhiser4659 2 года назад

you got lucky. Didn't work for me, the damn actuator on mine keeps running back and fourth.

@miguelmadriz2880 4 месяца назад

⁠@@fritzhiser4659hey have you gotten it fixed? I have a similar issue I just put in a new blend door actuator, did all different recalibrations procedures and it’s still stuck. With my old actuator it was stuck in hot but the new one is now stuck on cold it’s okay now that’s spring but in the winter it will be a pain in the a**.

@royalwulff1 6 лет назад

Thank you, you were a God send. It worked like a charm on my 2002 Tahoe.

@ScottTheFixItGuyChannel 6 лет назад

Awesome, it’s so nice to have temperature control again😺

@pearlwavey9051 4 года назад

Man thank you I have to change mine not sure which one's need to be changed👍🏾

@jaymestorain1473 6 лет назад

After buying 2 actuators (thinking the 1st 1 did work) at a cost of $42 each. After opening 1 up and trying to put t back together, after doing the 9 volt battery to move door to centerpoint. This video right here did the trick. Just replace actuator, (which the screws closest to the middle of the dash for the cover and actuator is a pain to get out and back in). if heat and cold doesn't work, just take ground off battery for about 1-2 mins put back on and turn ignition switch to the on position 2 click not run you will hear all actuators 1 at a time start cycling. Let it do this for about 10 min to make sure it complete full reset on all actuators. Turn switch back off, then crank up vehicle. There you go problem fixed (if blend door was your problem) Thanks again for this video , it work for me 2002 chevy tahoe dual front and rear.

@ScottTheFixItGuyChannel 6 лет назад

Thanks so much Jaymes😃👍

@truevision004 5 лет назад

well i need to try this because i have replaced two actuators and another motor under there and I STILL have clicking noise from them not calibrating. It is really getting on my nerves because eventually it drains my battery and I have to charge it with a charger to crank it. Man I hope this works!!!!!!

@jasonberry9103 5 лет назад

What setting do you put the rear clumate control on?

@truevision004 5 лет назад

@@jasonberry9103 sorry for late response, I have no rear climate control, only driver and passenger. Passenger side is the problem. Took out fuse(dic) or whatever it is called, turn key on after a min and waited about a min....turn off for min then back on ...not recalibrate. Guess I'll try again! (05 Chevy Monte Carlo SS Supercharged 3.8V6)

@85preston 6 лет назад

Great video. Thank you for posting it. I have a 95 Buick riviera that uses the same actuator. I’ve cleaned up the one on it and it works sometimes but not always. Has anyone reading this tried this calibration on a different GM Vehicle? Thanks again and thanks in advance.

@digitalmixer 6 лет назад

wow thank you I was wondering how do I know which actuator to replace my ac won't blow through my vents but will only blow through the front deep Frost for my windows is that the main one I always serve it working I feel like it's just stuck do you think all it needs is recalibrating or do I need a new one

@proee2471 Год назад

Thanks for this video. I have a 2001 Yukon Denali that needed a blend door calibration, but all of the other procedures I found on the Internet didn't work for me. Following your tips (primarily not starting the engine, but rather turn the key to the on posistion after disconnnecting the battery, or AC fuse, did the trick for me.)

@ScottTheFixItGuyChannel Год назад

Great to hear!😊👍

@JohnSerp1 Год назад

Just worked for me in my 2000 tahoe, thank you!

@ScottTheFixItGuyChannel Год назад

Thanks John😊👍

@darrenpickens7147 5 лет назад

Is this the same for an '05 buick Lesabre? The blend door actuator is operating out of range according to the marks on the actuator housing. My system is a single manual climate control with the actuator having 4 pins instead of 5 of the electrical connection.

@AdrianPerez-xv6rq 3 года назад

Thank you very much for your video it served me and I saved money

@ScottTheFixItGuyChannel 3 года назад

Thanks Adrian😊

@mrpoolplayer6379 4 года назад

I think I finally have it, but I haven't done it yet... it's a 100 degrees out there. I wished you would have made a small instructional list & placed it in front of the camera, for folks to pause the video & read or copy, so the instructions are clear & simple. Thanks

@gikhristkhuugzairs5755 Год назад

They should all do that...itd be sweet

@freddyv7546 5 лет назад

Thank You Sir!!! I tried all the fuses and banged my head around for days. I'm a new subscriber now.

@ScottTheFixItGuyChannel 5 лет назад

Thanks so much😊

@JoseVasquez-rw4lo 6 лет назад

Awesome work awesome video to great detail

@ScottTheFixItGuyChannel 6 лет назад

Thanks so much

@tracyhudson2798 Год назад

Well Done! Enjoyed the video... not alot of back story like most how to vids have.. Just tried it, haven't tested it yet. But really enjoyed the video!

@ScottTheFixItGuyChannel Год назад

Awesome, Thanks Tracy😊👍

@tomfarabee3510 4 года назад

Quick and easy!

@1987timevans 6 лет назад

I wonder what causes them the be un- calibrated?

@matthewdavis1501 6 лет назад

Nailed it. Thanks.

@ScottTheFixItGuyChannel 6 лет назад

Great, Thank you

@WeTryYouWin 2 года назад

Thanks a million!!

@ScottTheFixItGuyChannel 2 года назад

You are most welcome😊

@starnelson8825 4 года назад

07 Yukon stopped blowing cold on the driver's side. Buddy took out the actuator for it and lost it. Trying to buy the right one.. anyone know what actuator I'm supposed to buy?

@RasTona_ 2 месяца назад

Good job!!

@ScottTheFixItGuyChannel 2 месяца назад

Thank you! Cheers!

@rdillo5424 6 лет назад

Thanks for this info. It helps me understand a little more about the problem with my 2014 GMC Sierra - warm/hot air from driver's side vents for the last 14 months. Dealer first replaced the HVAC control module (had to wait 3 months for part). Problem returned 6 months later. Dealer then replaced the blend door actuator and calibrated same. Problem returned 2 days later. Dealer then "updated software and recalibrated the HVAC system". Problem returned 5 days later. Any suggestions on what to try next? Thanks much.

@mikelarry2175 6 лет назад

rdillo54 your dealership saw a walking free atm

@rdillo5424 6 лет назад

Mike Larry - Appreciate your comment, but I never had to pay for any of the work as the problem was initially noted at the 33 month mark of the truck's new vehicle 36 month warranty. The final resolution required removal of the plenum (which also required removal of the dashboard) in order to replace a blend door actuator that is attached on the firewall side of the plenum. This work was done about six weeks ago and since then the AC has worked properly.

@jordannew8316 7 лет назад

Thanks for the video. My mode actuator went out the other day and is stuck in defrost. Already bought the part I was just curious how to recalibrate the new one. Now I know!

@ScottTheFixItGuyChannel 7 лет назад

+Jordan New Thanks Jordan Try removing the 10 amp fuse from the fuse box under the hood that's marked HVAC/EACS for 10 seconds and then reinstall it. Next turn on your engine for two minutes to let all the actuators reset then fully turn off the engine for 20 seconds, then turn the engine back on to see if it resets. You may not need the new actuator.

@jordannew8316 7 лет назад

Scottthefixitguy already removed the old one. But will definitely keep that in mind. Thanks!

@jordannew8316 7 лет назад

I don't have a 10 amp fuse labeled that. I have a 30 amp labeled RR hvac and a 30 labeled frt hvac

@matthewdorr9699 6 лет назад

did it fix the problem

@denniswaterman3982 2 года назад

@@ScottTheFixItGuyChannel On some vehicles this is the 10 amp fuse marked "DISPLAY".

@VOYAGER2336 3 года назад

are the controls supposed to supposed to be all off before starting the recalibration procedure or will it recalibrate in whatever position/temperature setting it happens to be at?

@ScottTheFixItGuyChannel 3 года назад

Any position is ok👍

@chadoneal7339 5 лет назад

I unloosened the battery bolt like you said at 1:15 but it just seemed to get tighter.

@bradt9350 3 года назад

Wouldn't "Un-loosening" something be the same as tightening it? 1:16 Just asking...? Good video. Thanks

@ScottTheFixItGuyChannel 3 года назад

😂😂😂😂 sounds logical.

@albinwilson7856 7 месяцев назад

While this help to start the air/heat to come out of the face vents

@ScottTheFixItGuyChannel 7 месяцев назад

That should help😊

@baldy194859 5 лет назад

I have to change the blend door actuator on my 99 Chevy blazer ! do you set the actuator the same way as the Yukon and Tahoe ? thanks !

@ScottTheFixItGuyChannel 5 лет назад

He’s Sir

@ScottTheFixItGuyChannel 5 лет назад

Yes Sir

@andresbenitez9054 3 года назад

!!!@@ScottTheFixItGuyChannel @ +yvd

@Epicjib 3 года назад

I have tried this on my 2011 suburban and it will not calibrate. It defaults to 23c when fuse is pulled but no calibration after and just blows cold and out the front vents.

@enriqueayalajr4597 3 года назад

Different process that's why.

@damndatstuff9341 Месяц назад

I dont know whats wrong with mine i did all the steps everything is good but for some reason when i put it to cold(blue) it blows hot and when i put hot(red) it blows cold im literally stuck like im glad it blows cold now but its backwards, do know the reason to this?

@ScottTheFixItGuyChannel Месяц назад

Good question. Sometimes you need to repeat the reset process a few times to get the system back to normal. Once you get back in the truck after turning the key, make sure to wait 10 minutes before turning it all the way back on.

@Jodyfaye17 6 лет назад

What if for some reason the vehicle will not recalibrate? I've disconnected the battery ground several times 2 min. 5 min. 10 min, etc and then turned the ignition 2 clicks but the actuators do not budge or try to recalibrate. Any ideas would be appreciated! I've also tried pulling HVAC fuses suggested in other videos but nothing seems to work :(

@Conald_isAfalseProphet 6 лет назад

I was wondering the same thing but in your situation maybe you have at least 1 blend door actuator that is possibly bad..? I also a couple other video's of how to re-calibrate these if you haven't searched already.

@Blown76Elky 5 лет назад

I was wondering the same thing, since I just replaced the mode selector actuator and it did nothing. So I was mainly wanting to know if you had to make it calibrate before it will even work or if I have some other problem

@j.m4383 3 года назад

I know years later but did you ever find out to calibrate to fix the problem. I've done battery and fuses still nothing

@hectorgarcia9120 2 года назад

After I replaced the battery on my 2002 chevy tahoe, all I have is hot air blowing all the time even with the A/C on, do you think I need to calibrate the actuator?

@ScottTheFixItGuyChannel 2 года назад

Yep, That will fix it😊👍

@morecowbell235 2 года назад

I wished this worked. Unhooked battery, waited a few minutes, plugged battery back in, inserted key, turned a couple clicks but not all the way until it starts. Didn't hear anything. Does the AC have to be on or off when you turn the key? Mine automatically comes on after the battery is cycled off/on.

@ScottTheFixItGuyChannel 2 года назад

Ac needs to be on👍

@morecowbell235 2 года назад

@@ScottTheFixItGuyChannel Thanks I'll give it another shot

@manuelcastallera6538 4 года назад

👍

@larrylallemand6167 3 года назад

If it was that easy on a 03 s 10

@DadBodOperatoR Год назад

Will this work on 2010 tahoe?

@ScottTheFixItGuyChannel Год назад

Yes it will👍

@masonfalcon6933 9 месяцев назад

@@ScottTheFixItGuyChannelwhat about a 2012 Chevy traverse?

@moose9626 7 лет назад

Is it common for two to go out? I was working on a guys car and both of his werent working.

@dionkraft6782 7 лет назад

Well sometimes the recirculation one will fail but you won't notice it. Then another like the temp will fail and then you do. Then you discover that two have failed if you read the codes. Many times the Recir led will not stay lite when it fails but some people don't really notice that.

@jeremyladnier687 3 года назад

I cant get mine to slide back on that black post I fought with it fir two hrs any advice

@ScottTheFixItGuyChannel 3 года назад

Hi Jeremy, Can you turn that black post a little bit so that it lines up better with the plastic female portion of the actuator?

@mallkrawlerz620 Год назад

Did you figure this out? Mine is t lined up either.

@mallkrawlerz620 Год назад

@@ScottTheFixItGuyChannel mines doesn’t like up either. At all. Any advice?

@hanluong2510 Год назад

@@mallkrawlerz620 Exchange with another one. the dot at one side supposed to at the center. Your properly not. Turn the actuator around. Where the plug in you will see the center line.

@DDRANNN Год назад

Were is the actuator located

@ScottTheFixItGuyChannel Год назад

For the blend door actuator is located at the lowest point of your dash board right in the middle just a few inches above the carpet.

@DDRANNN Год назад

@@ScottTheFixItGuyChannel I have a 2010 gmc sierra, I will look again.I even removed the bottom panel .just don't ser it

@thesaabisturbo Год назад

I have that same tiny little ratchet and it’s a fkin tank! Makes my 3/8 drive craftsman look like a used diaper.

@ScottTheFixItGuyChannel Год назад

😂😂😂😂😂👍

@johngisler29 8 дней назад

what ratchet is that?

@thesaabisturbo 7 дней назад

@@johngisler29 idk the brand, it’s from Oriley auto parts store.. it’s a really good one too.

@nonolabs 6 лет назад

Mechanics are charging $100 for this. What a rip off.

@joeygemini6390 5 лет назад

There's one more step . . . Start car and let run for at least 10 seconds but not more than 30. Then the recalibration is complete. Can't imagine why the last step. I wonder if someone added that as a joke but somehow it started being taken seriously.