Excellent machine!!! One Caveat: you should always measure runout at the actual machine center, instead of the outside of the chuck. The outside is almost never square to the inside bore. chuck up a piece of drill rod or some precision round bar, and use that to measure runout.
My dear brother, if you increase the welding shielding gas a little, it will be a healthier work..! Otherwise, overloading may break your machine! Respects..
용접하는거나, 만드는 폼새를 보니, 진짜 개판이네! 정성과 섬세함과 정교함이란 찾아볼수가 없네요! 그 좋고 편한 논가스 용접기로 용접 하는것도, 마치 귀찮아서 막가파식으로 용접하고, 철판을 붙이는 것도 진짜 DIY같지도 않네요! 이렇게 유튜브로 내보낼꺼면, 시청자들이 볼때도, 덕이 되야하는데, 보는 내내 짜증이 나오고, 한숨만 나오네요!
lessons from long journey 1)draw a specific blueprint even each and every bolt and nut 2)before cutting and welding, you have to make a realistic wooden mock-up sample 3)ever step, measure and measure.
Струбцины называются ваймы. Логичнее профиль располагать на ребро, чтобы меньше прогиб был.Фиксацию ответной каретки проще делать без резьбы, поднял-опустил, можно с пружинкой или просто с фиксацией штыря, в крайнем верхнем положении, чтобы не терялся. Когда сохнет клей времени крутить винты нет.