@@CatSovietski Two are the X99T8's flashed with Mi899 X99F8 bios unlock. The last is a generic x79 atx from Machinist. T8's are using the E5-2678v3 whereas the x79 uses the E5-2650v2. My T8's Win10 sleep function works though.
@@anthonyslaughter1728 congrats on those kits... They're awesome... I have the f8 one, planning on getting the 2678 v3 as I'm still using the 2620 v3 which is still pretty usable but not enough for adobe applications
What I don't understand is why the Chinese are messing up with the BIOS, why they don't try to create a good BIOS. You have shown that one BIOS can be used on multiple motherboards. Following your guidelines, I have seen you troubleshoot turbo boost, USB 3.0 and memory timings... Good video as always man... This is the best RU-vid Channel about Xeons Chinese motherboards !!!
I was hoping a review would be done for this board because I just bought it. Too bad sleep mode doesn't work but I'm glad my E5 2640v3 will turbo boost. I appreciate your hard work. I'm new to your channel but I love all the videos I've seen so far.
@@tamakimob9898 Yes, it's still going strong. Runs 24/7 & have turbo boost mod from Miyconst enabled. I have E5-2640v3 & RTX A2000 6GB. BF2042, 70 FPS @1440p.
@@EvilEng9 i want to make it with e5-2670 v3 but its basic Frequency is 2.3 .. and in intel website they said that its Max Turbo Frequency is 3.10 , can i reach it with this motherboard ??
@@tamakimob9898 Yes, you can hit 3.10 all core turbo using the Miyconst tool. Check his description in the video for links. He has a video for instructions too.
@@EvilEng9 Sorry for the many questions, but I have another question. How much power supply capacity do I need? Is 500 w enough? And do I need a strong air cooler or a normal cooler will suffice? Because my budget is limited
Really? If you keep the motherboard on a box, the back side will heat up this much, but in my case it is mounted on a test bench, and the back side temps are ~5-7 degrees less.
Really, in cases the temperature reach higher value on rear side of motherboard, just back from VRM mosfets, but, if you change the original thermal pad for a high conductibility one, like Thermal Odyssey, the temps tend to be more homogeneous through the heatsing and board. I am using a DELTA 4020 12V 0.6A PWM fan on heatsink, using a fan controller i set the speed to havd a good air flow without noise. I unlocked the board, and set 50-20 undervolting, chipset is C226. I am using E5 1620 V3 4/8 @3.6 all core, 140W cpu. The temps on AIDA FPU test do not hit 60c. I will test with a 2685 V3 12/12 @3.3ghz all cores 120W soon to see the impact on temps.
@@juninhocale4044 yes, you can do that, it helps to transfer heat from the motherboard VRM to the chassis, but it's also easy to screw something up and cause a short circuit, which will kill your motherboard and be a potential fire hazard.
About the 4 pin fan header. I found that on my huananzhi 8m-f the second 4 pin header is not controlled by the bios smart fan. You can however set a fan curve by using software such as FanControl.
i do really like your way of reviewing motherboards and going over all the little details of them, chinese or not because motherboards are so complex and have so many features packed that it could be very daunting for someone who doesn't have the board in their hands to know if is a decent mobo or a piece of crap i would like to see more reviews of other more mainstream motherboards in the future when you have more subs and the budget allow for it ofc
This channel has saved me a lot of $$ and needs more subs, thumbs up from me. I think a Chinese manufacturer made this for a brand name, but it never came up to spec, sold as not working, unbranded and flogged off to those on Ali express that get it going enough to scam us customers into buying it.
Hi, thank you very much for this very informative video. Thank you also for this magnificent Mi899 program, I flashed my Bios without problem (card bought 15 days ago). I didn't want to have a problem with this card and you offered me everything you need to, indeed, have no problem. Cool !
Thanks you for this great review. I was waiting for it ! Now I know I will not use this board for my E5-2680v3. Looks like I will have to buy a regular board for this processor anyway...
@@nmocruz In my use case, setup will be in a small case, in a closet, and run 24/7. This are not best context, this is why I try to find a better motherboard without temperature issue. However, it looks to be a good motherboard for most use case. Just not fit my requirements.
@@AlexandrePetitjean hard to find a small one with a good VRM for CPU with many cores. keep lookng, this channel is going to review to more mb, maybe the x99m plus d4, but let see the review
Thanks for this information, really great having in mind that i'll probably buy one kit with 32Gb Ram and a 2690v3 which I wont try to Overclock at all. Greetings
I remember that I had an Athlon XP 2400 + that used to fail to go to sleep properly. I'd get a black screen, but the system was still running and still using power as usual.
Hello, thank you for this good video and for all the work you do. I bought this Machinist x99 rs9 chipset Q87 board with Intel Xeon E5 2670 V3 processor with 2 x 8 GB of RAM, I am using an Asus GTX 1070 TI board the BIOS is original and is from 2022 is that I have to update with your BIOS and which one to choose? Thank you in advance for your reply have a nice day
Hey Miyconst, a quick question about the B85/Q87 and memory compatibility. In the past video's you mentioned the C612/x99 chipset is a bit picky of RAM type: rank and nr. of banks a stick has. What about these desktop Q87/B85/H85 boards? Are these implemented chipsets a bit more flexible?
As far as I know, the standard Huananzhi X99-8M-F BIOS can be used with Q87 chipset as well, but I can't guarantee that and there is always a risk to brick the motherboard.
6:50 Have your tried disabling STR and enabling hibernate? I've had a couple very old machines that wouldn't STR but could hibernate. Hibernate doesn't require too much hardware support. 7:50 Isn't that Turbo Boost Max 3.0? 6800k has it. E5-2678 v3 doesn't. 9:40 While I agree that the VRM is too weak, using a top-down cooler (instead of a tower cooler) would lower the temperature tremendously.
I know I’m late to the conversation, but hibernation works on this board. I just put my system together today and confirmed. Not quite as convenient or efficient as sleep, but it’s better than nothing.
This video is from a few years ago but I'll take a chance at asking a question. Which of these x99 works with overclock and all else important using your Mi899 and has quad memory support? and do you think quad mem support is really worth it in gaming or editing( I don't know much about this, yet)? Because I'm finding it a bit difficult to find which x99 is best to pick ( I'm sure you have heard that a lot). I suppose I was thinking of using the e5 2699 v3. I'm going to continue to watch your vids to learn more about these x99. I'm sure I will watch other vids you have about other things as well because of the time and effort I've seen that you've put into this(x99) alone. Thank you for your time and effort. Oh and I definitely Subscribed.
If you are looking for a motherboard with overclocking and all other bells and whistles, then do yourself a favour and go with AM4 / LGA 1700. For X99, this summary is still relevant: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-YlkQV90-l1k.htmlsi=s6gMO8poIZcRU0Qw
Is there a guide or some documentation available to try using Huananazhi X99-8MF BIOS with this motherboard like you mention at 5:20 ? I got this board to build a portable workstation but I'm experiencing some very strange issues such as failure to POST or random freezes during IO operations. I want to give the alternate BIOS option a try, but I'm unsure where to look for documentation on this.
If your system behaves this bad, it may be a hardware failure, but feel free to try my Mi899 app, there you will find a collection of different BIOS options. Also make sure to have fresh Windows installation.
Maybe the Jingsha X99-8D3 would be an alternative. A little. It cheaper than TF (around 85€ on Ali shipping to Germany). It is using x99 (c612) and 8x DDR3. TF bios could be used and working fine for me with 2678v3 turbo unlocked. DDR3 makes no big difference and used ECC Ram is quite cheap. Thanks for your great review, and helping me to buy some cheap components for playing around with virtualisation.
Will E5 2670 v3 cause heating issues with this Motherboard as you stated? I do have Hyper 212 cooler and pretty decent case with good airflow, my current CPU which is i7 3770 never goes above 60 Celsius with 100% load. Also Is it a good upgrade from i7 3770 to E5 2670 v3? I mostly use my system for gaming and video editing.
In most cases you will get noticeable performance increase, but it all depends on your GPU, game, and RAM timings. X99-RS9 has a weak VRM, thus I would ensure good airflow over the VRM zone even though E5-2670 V3 is not extremely power hungry.
I loved this video, I was thinking of buying an RS9 x99 a long time ago but thanks to this video I have already decided that I will buy it, since for the features it has and others I think it would be a good option to have my own low cost set up. I only have a few doubts, if I first use an e5 2620v3 with the turbo bost bios, will I have a problem if I later want to change the processor to an i7 5930k? And would you recommend upgrading to i7 5930k? excellent video keep it up!
Core i7 CPUs are not compatible with unlocked BIOS, thus you will have to restore the original BIOS before upgrading the CPU. X99-RS9 + i7 is a pointless combo because RS9 doesn't support overclocking. You would much better be with E5-2666 V3.
Hey dex, I only have 16gb of ram working with mine, the other stick wont work. I tried a replacement just in case it was a bad stick but that didn't work either. Have you had any similar problems? I haven't done a bios update. e5-2670 v3
@@PhonePhone-sf8te i did and the issue was the cpu had a dead C channel and other time the issue was the motherboard tgat only had dual channel support. (2 green slots 2 black) i fiiled the greenslots then balck and the sitcks worked but yeah. Got a 5930k with dead C channel
@@dexsters5643 so it worked out for you by just switching to the black slots or it's still messed up? I'm pretty confident that the cpu doesn't have any bent pins. Do you think they're just sending out boards with bad ram slots/bad cpus?
@@PhonePhone-sf8te if were talking about aliexpress X99 boards. No they rarely do. ( i meam rarely bc i got my X99-RS9 with 2 bent pins and 1 missing. But fixed it) The chinise boards with 4 or more ram slots they have issues like first populate the green/red slots then the black ones. Which in my case worked. While others like the X99-D8 from jinsha that board has a jumper if you fill all 8 slots to give more power. Which board do you have? Maybe its dual channel only with 4 ram slots or you need to change a jumer on some pins? The X99-D8 had jumperpins where the cpu 8pin would be on a normal Atx Board
Mine was fine too, but i wanted to tight the timings of the ram, then i flashed, tightened the timings and turned on the resizable bar and everything works great, also added a fan on vrm too.
Thanks for your videos, they helped me to decide on buying a chinese kit! My idea was to mount a 2678 V3, as besides "normal" usage and games, I also do about a render per week, at 4k 60fps. Right now I need to wait 2 hours to render a video of 4 minutes! Do you think that HUANANZHI X99 F8 motherboard will handle it fine? It is worth to go for the 2678 V3 instead of the 2620 V3? My current PC has an i5 3550 and 8Gb of DDR3. Greetings from Spain!
Hi, I don't have a big budget and I was wondering if this mobo with a e5-2620v3 or 2640v3 and gtx 1080 could be the sweet spot for a casual gaming and continuous mining rig. If the system is running 24/24 could it become dangerous (vrm heating)? I would like a safe machine. Thanks for your help. Btw amazing reviews!
For GTX 1080 I would definitely go with E5-2640 V3, because E5-2620 V3 will be the bottleneck in the build. X99-RS9 will be fine if you run mining on GPU only, I would not recommend this board for 24/7 CPU mining.
Thank you for the technical review - what cooler did you use for your build? I bought the motherboard and a Hyper 212 cooler but I am unable to install the cooler.
Cooler Master Hyper 212 Evo has multiple variants, some come with LGA 2011 mounting, others without. If you don't have the required mounting you need to get another model.
I really like this motherboard size and features, a 4x instead of 1x slot would have been much better, sadly i'm pretty sure the efficiency will be terrible
Minha placa mãe x99 machinist Q87 não consigo fazer turbo bust e nem timings, eu executo o mi899 como administrador porém o dump não abre como administrador e assim não consigo fazer nada, o que pode ser isso?
Algo raro me sucedió con esta tarjeta madre. Dijiste que no funcionaba la suspensión y lo probé y efectivamente se quedó bloqueado y tuve que hacer un Clear CMOS para que pudiera volver a iniciar en Windows. Hasta ahí, todo "bien" porque pasó como dijiste pero resulta que hoy, mi hijo presionó una tecla del teclado en forma de luna y el equipo "se apagó" y pensamos que era necesario hacer otra vez el clear CMOS porque presionamos el teclado y el mouse y no encendía pero al presionar el botón de encendido, el computador encendió y todos los programas que mi hijo tenía abiertos, seguían abiertos como si nada... osea que, por alguna extraña razón, la suspensión o "sleep mode" está funcionando y no sé por qué. Cabe aclarar que no he modificado la BIOS de fábrica y que el teclado está conectado por PS2. Es un Compaq RT7H00 y el sistema operativo es la última versión oficial del W11, la 23H2.
Hi miyconst, appreciate the inmense work you put on your content. Will this mobo be able to keep up with a 2670v3 turboboosted? I guess not, but will it have worse temps than a 2640 v3?
@@Miyconst Thank you so much, I ended up going for a Machinist X99 PR9 and e5 2670v3 because I saw a review by Lipezito that had much better VRM thermals than RS9(65-70º vs 80-90º in Aida). Is the PR9 contemplated in your flashing software? Or TBU should be done manually? Thanks in advance
Thank you for all your hard work! I viewed a lot of your videos to research and finally bought this motherboard. I’m going to use it for a home server with an Intel Xeon E5 2637 v3 and 32GB of DDR4 ECC memory. If I plan to install Proxmox as the main OS, would you recommend I still flash the BIOS with the recommended version?
Is there a specific version of the BIOS you would recommend I use, for something that will run 24/7 but will be idle 90% of the time. I don’t think I would need Turbo Boost either, just something that runs stable and uses low power
Got my motherboard, everything seems normal. Installed Windows and ran the Mi899 tool to flash the Huananzhi x99-8M-F BIOS. My previous question was more around if I should use the -50mV or similar BIOS (I'm totally unfamiliar with CPU undervolting) but in the list of available BIOSes for this motherboard, based off the description, the X99-8M-F BIOS seemed like the best. I've now got Proxmox running. Thanks MiyConst for your work again!
Thank you for very useful information as always! Now I've got Machinist(Kllisre) X99 V201 from Ali (www.aliexpress.com/item/1005001639760170.html?spm=a2g0s.9042311.0.0.7a794c4dIC9ThM), but 1. Front USB3.0 is sooo slow as if it's USB2.0 2. CPU temperature lies as if it's cool 3. E5-2660 v3 can't boost to 3.3GHz but just only to 3.0GHz 4. Task tray says there's no internet but actually LAN is connected and I can connect to the internet 5. BIOS has no RAM timing settings 6. Sleep won't work I hope your modded bios solves some problems. Again, thank you for this channel!
Waiting for Miyconst Review of this board. I suspected that would be some trick with this USB 3, h81 has Just 2 usb3. Buyers from Aliexpress say that IS Just dual Channel, but Intel Ark say that IS Just 1 dimm per mem chanel, lets wait miyconst Review. There is old x99 d4 on daixu store, maybe its good option now.
What chipset does this use? I have a i7-5820k but all of the X99-RS9 boards I find say they have a B85 chipset. Is this compatible with a i7-5820k, or do I have to find a different one?
Is replacing the thermal pads under the vrm heatsink on this motherboard with a higher thermal transfer graphine pad a reasonable fix for vrm temps and/or with a vrm fan? I am looking at what appears to be a ddr3 version of this board from Jingue (who I assume is a rebrand of machinist) and would probably work with the x99 hm-f huananzhi bios, and will be doing my own testing
@@Miyconst thats unfortunate. I do have an EVGA copper heatpipe vrm finstack from an X58 board I was going to try to fit to the board with the graphine pads, as it has the same mounting hole measurements.
Judging by the TDP - the motherboard will be a fire harazd if you try to stress test it, but I don't know how this CPU behaves in real life. For example, E5-1620 V3 has a very high TDP as well, but in reality, it consumes about as much as E5-2620 V3.
Is a good opportunity for businesses, firstly they sell this motherboards overheating, then they could offer heatsink and active cooling for the mb as extra accessories to sell to people that want to use certain CPUs
I'm having problems with this motherboard, everything was working but there's drivers missing used to use ethernet and I cannot find these drivers anywhere or where to download them etc. Can anyone help?
@@Miyconst I searched that up and installed the Win10/Win11 Auto Installation Program (NDIS) onto a USB stick and then plugged it into the other pc, when I ran it It just gives me the message "The Realtek Network Controller was not found. If Deep Sleep Mode is enabled Please Plug the Cable." (I'm not an expert on this kind of thing so I don't know what to do as everything I've tried so far doesn't work and nobody knows a solution.)
Nice video really helpful!! I´d just received my X99 RS9 motherboard and I have a question. In order to get the dual channel , in which slots should I plug 2 memory stick? Thank you for your help!
X99-RS9 has quad memory channel configuration, it means that each slot has its own channel, means it doesn't matter which two you use you will get dual channel configuration.
Hello Miyconst, As you mentioned in this video, I did the procedure of changing the bios of my Machinist RS9 card to the bios of the Huananzi 8MF and everything went well for the Mi899, congratulations for the program, it is very easy to use and fast But I had a question, I would like to change the RAM timings, but in the factory 8MF bios there is no such option, as I use the 2683 V4, it does not support turbo boost, I was afraid to put the bios "8MF, TP" just to change the RAM Timings as I don't know what that "TP" means Can I install this TP version? or Do I have to go back to default RS9 bios with Ram Timings unlocked? Thanks.
Thank you for the support. Each BIOS has it's description, please read it. TP, most likely means TechnoPlaneta, another RU-vid channel that covers Xeon builds, and I added their BIOS into Mi899.
The change from Bios to TP and the timings went well, here the least I could get was 12-12-12-28-306-40, the latency was 89.6 and now it's 74.5 Thank you for your help
Hello, I have this motherboard with a 1650v3 Xeon inside of it. I have flashed the 8mf bios and rs9 bios, from your Mi app, with unlocked RAM timings and tried many of them. My problem is that when I enable "Overclocking Features" the system just hangs and will not POST until I clear the CMOS. I dont change anything, or I do set what I believe to be fair settings (i.e. 38 multi with 1200mv). Still no POST until I clear the jumper. I have been through this time consuming act for awhile of trying different known working BIOS' and have only been left dancing with a tambourine. Why is this happening? My CPU is multiplier unlocked... not even XTU in Windows 10 will let me play with the Multiplier! I am very confused because it says in XTU that it is COMPLETELY UNLOCKED. I'm pulling my hair out. Thank you very much. PSU is Seasonic CX 650, 980ti, 16GB DDR4, NVME PCIE SSD, M.2 WIFI/Bluetooth, Samsung SSD, Gammix 400 v2 aircooler, Coolermaster TUF 300QL, thats about it.)
Hello. Did you watch the video at all? I have specified very clear, this motherboard does not support any overclocking because it uses a desktop chipset.
Should I flash the Huananzhi Bios to this motherboard in windows 10 or is there more to it? Any chance you could make us a video showing how to do this?? Thanks!!
You should understand the risk and the consequences of flashing the BIOS and then decide for yourself if you should or should not do that. I already have a dedicated video about Mi899: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-bO2t790vhg8.html
Could you recommend for me X99-k9 and X99-rs9. Which one is good for i7 5820k? I see rs9 has 2 ports fan 4 pins for case. K9 only has one port fan 4 pins. Like your channel. Very useful for knowledge. My motherboard asus just gone.
I would definitely go with K9, even though the VRM is weak you still have at least some overclocking possibilities while RS9 uses desktop chipset with zero overclocking options. I am currently testing such a combo.
Hi, so I'm trying to overclock my i7 6800k on machinist rs9, but when I activate the overclock function, the error code screen on the motherboard gives error 19, and it.ao starts. And I have to reset the cmos, do you know how to fix this? I really appreciate it if you know!
Hello from alabama, you probably get tired of answering all these questions but, I bought this motherboard for a budget gaming rig and I read through the comments to see that it supports the 6800k (with no oc) and I also saw the cpu is 140 tdp, would this make the vrms overheat?
Nice to see a properly wired x16 lol. Ive decided i will be getting a 6800K. Prices are getting very nice for them, too good to pass up. I still havent decided if i should get a china mobo or cough up the 160-200 for a nice asrock or asus, etc. So ive been rewatching alot of your reviews. I have recently seen several ebay sellers offering a 6800k-6950x paired with an HSGM X99_s680 v3.1c far what seems to be a very decent price. have you heard of this one at all? its design reminds me of the huananzhi x79 2.85 but with an x99 socket, and a single vrm cooling fan,
I will try to check what that motherboard is, but so far I can't say much. As far as I remember, most of those boards had only two memory channels, 2 slots for DDR3, and 2 slots for DDR4, which makes it rather pointless.
@@Miyconst yes im only really considering the F8 or D8, even if i dont NEED 8 dimms, its cheaper to add sticks than replace the ones you have, so i could get 4x4 now and add an identical 4x4 later if needed. 219 is what they are asking for that board and a 6800K. it only has 4 dimms. looks like dual channel. but i might consider just buying the deal and selling the board www.ebay.com/itm/Intel-Core-i7-6950X-6900K-6850K-6800K-E5-2680R-V4-E5-2680-V4-with-X99-Motherboar/174549060356?hash=item28a3ef4b04:g:WHkAAOSwaYVfzbGg this is the link in case you are curious. tbh, 40 extra for a 6900K might even be a worthwhile deal. ive seen them close to that price with no mobo
@@eclipsegst9419 the motherboard you have linked has 2 DDR4 and 2 DDR3 memory slots. DDR3 & DDR4 cannot work together, and there are only a few Xeon V3 CPUs which support DDR3. Thus, there is no way this motherboard has quad channel RAM configuration.
I have a question please.. WHAT motherboard would you recommend for x99 lga 2011-v3 in a micro atx with similar PCIe slot configuration and m.2 nvme? One without a bios issue
Hi, is there any motherboard in M-ATX or ITX format that supports well the E5 2678v3 with turbo boost and has quad channel RAM? Thank you for your videos, I really enjoy your content.
Hi there, thank you for the video, it was great!! I bought this motherboard with 64GB RAM ECC and Xeon E5 2673 V3, and I was trying to make ECC work, but at least with the original BIOS, it doesn't work no matter how many ECC features of the BIOS I change so I stated reading several blogs and it looks like changing the BIOS is a solution in other motherboards. What do you think about it? Have you experienced something like this?
Good Morning. Forgive me if you have already stated, but would you prefer x99 qd3 or x99 rs9? I am building a Red Dead Redemption 2 pc, and need to decide on which one. Thank you.
Hi friend, I liked very much this motherboard for a budget server. I am thinking if a E5-2618L v4 (QS) can works normally in this motherboard. Or if you think it's better to stick to the v3 options non-QS. Thanks in advance.
@@Miyconst in dolar this qs cpu is $108. It is almost 3x the price of the 2630l v3. I have a 2630l v3, I like it very much. I was thinking of 2618l v4 as a way to reach a higher single thread performance (and a ddr4 2133 support). A qs cpu could be unstable? Or maybe it's a bad choice
Hello, I flashed bios using Huananzhi X99-8M-F today (-70mv version), then the RS9 stuck at error code 91 and refuse to boot....Anyway we can reverse the bios at this stage? Thank you! (Last time, it was succesful, not sure what happened this time.....) I guess have to try CH341A way.
Hi miyconst, Please if you can help me, I got the Machinist X99-RS9 kit (most current version that has the temperature led) + 2683 v4 + 32g ram ddr4 2666mhz Do you indicate using the bios that already comes in it or one that you have created? As the v4 version has no way to turboboost, what would you advise getting to 3.0GHz? Thanks
Hi there. X99-RS9 is compatible with Huananzhi X99-8M-F BIOS, at least the revision I have tested was compatible. Xeon E5 V4 cannot be turbo unlocked or overclocked, you are stuck with the default frequency.
@@Miyconst Good, since the 2683 V4 doesn't have turbo boost, when the card arrives, I'll try to do the RAM Timings, do you think it would improve the performance? Does this BIOS that comes with the Machinist RS9 have the option of memory timings?
@@Miyconst I learned that as V4 versions do not have Turbo Boost, you can use the Throttlestop program to increase the cores and increase performance, then test
No, China branded RAM is often incompatible with the Chinese X99 motherboards. If you decide to buy Machinist/Kllisre or similar RAM - make sure to buy it in a bundle with the motherboard so the seller tests it for compatibility.
Thanks, a lot, I’m thinking of buying this mobo with a 2630v3 but I’m a bit concerned about the usb 3.0 issue you mentioned on the video. Is that a problem I can get along with if I decide to not change the bios? The thing is that I don’t have any idea of how to do that and I don’t want to mess it up with the bios
Chinese X99 motherboards are only for those who are not afraid to get their hands into some basic PC tuning. For gaming it's essential to unlock Turbo Boost, otherwise the performance is very crippled. With Mi899 it's just a few mouse clicks, but you need to understand what you are doing.
@@Miyconst thanks for the rensponse! Fortunately I have a frind that knows about this stuff, he will be helping me to change the mobo’s bio for the x99 8m-f you talk about in the video. Thanks again!
Thanks for the video I learned a lot. So is there any way to get a proper CPU temp reading? I'm building my first computer with this board and would like to know. Thanks
RS9 2640v3 working fine with Huananzhi X99-8M-F -50/50 BIOS. Only one downside wich is that it freezes, requiring to force shutdown when looking at sensors, like aida64 and hwinfo. Aida can be fixed by disabling PCH / Bibxy module but hwinfo I'm unable to use, still looking for a fix
Unfortunately there is no fix for this issue, the desktop chipsets were not designed for LGA 2011-3. Maybe a better BIOS could solve the problem, but so far there is no such BIOS.
