🐝Speedybee Mario 5/ rcinpower major wasp/ air unit O3/ no jello/ sin hélices  

Yes, G2

Le puse lo mismo que máster 5 # dump # version # Betaflight / STM32F7X2 (S7X2) 4.4.0 Apr 11 2023 / 05:25:16 (4605309d8) MSP API: 1.45 profile 1 # profile 1 set profile_name = - set dterm_lpf1_dyn_min_hz = 67 set dterm_lpf1_dyn_max_hz = 135 set dterm_lpf1_dyn_expo = 5 set dterm_lpf1_type = PT1 set dterm_lpf1_static_hz = 67 set dterm_lpf2_type = BIQUAD set dterm_lpf2_static_hz = 135 set dterm_notch_hz = 0 set dterm_notch_cutoff = 0 set vbat_sag_compensation = 0 set pid_at_min_throttle = ON set anti_gravity_gain = 80 set anti_gravity_cutoff_hz = 5 set anti_gravity_p_gain = 100 set acc_limit_yaw = 0 set acc_limit = 0 set crash_dthreshold = 50 set crash_gthreshold = 400 set crash_setpoint_threshold = 350 set crash_time = 500 set crash_delay = 0 set crash_recovery_angle = 10 set crash_recovery_rate = 100 set crash_limit_yaw = 200 set crash_recovery = OFF set iterm_rotation = OFF set iterm_relax = RP set iterm_relax_type = SETPOINT set iterm_relax_cutoff = 15 set iterm_windup = 85 set iterm_limit = 400 set pidsum_limit = 1000 set pidsum_limit_yaw = 1000 set yaw_lowpass_hz = 100 set throttle_boost = 5 set throttle_boost_cutoff = 15 set p_pitch = 39 set i_pitch = 97 set d_pitch = 43 set f_pitch = 129 set p_roll = 34 set i_roll = 79 set d_roll = 32 set f_roll = 124 set p_yaw = 32 set i_yaw = 88 set d_yaw = 0 set f_yaw = 100 set angle_level_strength = 100 set horizon_level_strength = 50 set horizon_transition = 75 set level_limit = 55 set horizon_tilt_effect = 75 set horizon_tilt_expert_mode = OFF set abs_control_gain = 0 set abs_control_limit = 90 set abs_control_error_limit = 20 set abs_control_cutoff = 11 set use_integrated_yaw = OFF set integrated_yaw_relax = 200 set d_min_roll = 29 set d_min_pitch = 40 set d_min_yaw = 0 set d_max_gain = 37 set d_max_advance = 20 set motor_output_limit = 100 set auto_profile_cell_count = 0 set launch_control_mode = NORMAL set launch_trigger_allow_reset = ON set launch_trigger_throttle_percent = 20 set launch_angle_limit = 0 set launch_control_gain = 40 set thrust_linear = 25 set transient_throttle_limit = 0 set feedforward_transition = 0 set feedforward_averaging = OFF set feedforward_smooth_factor = 65 set feedforward_jitter_factor = 12 set feedforward_boost = 15 set feedforward_max_rate_limit = 90 set dyn_idle_min_rpm = 0 set dyn_idle_p_gain = 50 set dyn_idle_i_gain = 50 set dyn_idle_d_gain = 50 set dyn_idle_max_increase = 150 set level_race_mode = OFF set simplified_pids_mode = OFF set simplified_master_multiplier = 90 set simplified_i_gain = 130 set simplified_d_gain = 100 set simplified_pi_gain = 85 set simplified_dmax_gain = 50 set simplified_feedforward_gain = 120 set simplified_pitch_d_gain = 120 set simplified_pitch_pi_gain = 105 set simplified_dterm_filter = ON set simplified_dterm_filter_multiplier = 90 set tpa_mode = PD set tpa_rate = 35 set tpa_breakpoint = 1200 rateprofile 0 # rateprofile 0 set rateprofile_name = - set thr_mid = 25 set thr_expo = 65 set rates_type = ACTUAL set quickrates_rc_expo = OFF set roll_rc_rate = 7 set pitch_rc_rate = 7 set yaw_rc_rate = 7 set roll_expo = 13 set pitch_expo = 13 set yaw_expo = 13 set roll_srate = 67 set pitch_srate = 67 set yaw_srate = 65 set throttle_limit_type = OFF set throttle_limit_percent = 100 set roll_rate_limit = 1998 set pitch_rate_limit = 1998 set yaw_rate_limit = 1998 set roll_level_expo = 0 set pitch_level_expo = 0 # end the command batch batch end #

Si quieres por aquí te podríamos ayudar t.me/ELRSfpv

Hola , muchas gracias por tu parte y por responder tan rápido. Muy amable. Si no es indiscreción por cuanto le salió el dron que montas en el vídeo, de nuevo muchas gracias.

@@josemariaeliasdelgado9446 35€ frame 83€ F7 V3 BL32 50A 100€ motores wasp major rcinpower 250€ air unit o3

Yo tenia las truerc x2-air

Lo volé poco ya no lo tengo, le puse unos motores potentes los rcinpower jasp major

1300 cnhl negra

Utilizó adobe premier o davinci