No video :(

💡QuinLED💡Alternative LED types to use with your dig2go

Подписаться 57 тыс.

Просмотров 9 тыс.

50% 1

The dig2go is very easy to use for 5v ws2812b or sk6812 LED strip but you can also drive 5v ws2811 pixels and pixels beads with it so let's take a look at that!
0:00 - video introduction
📝 Discord 📝
If you still have any questions, let me know in the comments or join the Intermittent Technology Discord server here: / discord
░▒▓[Shopping links]▓▒░
❕ All below links can be affiliate links which provide me with a small kickback in case you purchase something. If you use them, thank you very much! :D ❕
*At the time of this release US local stock has either just arrived or is very close, worldwide should have enough stock*
💡💡 Buying the dig2go and bundles💡💡: dig2go.info/di...
✨ dig2go dedicated website: dig2go.info
✨ dig2go getting started page: dig2go.info/v1...
✨ dig2go quinled.info pages: quinled.info/q...
✨ dig2go quinled.info pinout guide: quinled.info/q...
LEDs shown in this video:
✨ USB-C cable with display used: s.click.aliexp...
✨ cheap black 5v ws2812b strip: geni.us/IxBm
✨ 5v ws2811 pixels xConnect: www.aliexpress...
✨ 5v ws2811 pixels JST: s.click.aliexp...
✨ super thin wire 5v pixel beads: s.click.aliexp...
✨ plastic wire 5v pixel beads: s.click.aliexp...
Recommended USB power bank:
✨ (tested) Very high power 20.000mAh powerbank (100w output for laptops!): s.click.aliexp...
✨ 10.000mAh or 20.000mAh output high quality powerbank: s.click.aliexp...
✨ 30.000mAh powerbank: s.click.aliexp...
My other custom Addressable LED controllers:
✨ QuinLED-Dig-Uno Pre-Assembled: quinled.info/p...
✨ QuinLED-Dig-Quad Pre-Assembled: quinled.info/p...
✨ QuinLED-Dig-Octa System: quinled.info/q...
✨ QuinLED-Data-Booster(-Maxi): quinled.info/q...
✨ Addressable LED strip guide: quinled.info/2...
✨ Power supply buying guide: quinled.info/p...
✨ QuinLED-Dig-Octa Power Supply recommendations: quinled.info/q...
✨ Tools and Equipment used page: quinled.info/2...
📚 Real-World Addressable LED power sheets: quinled.info/2...
📚 Christmas tree guide: quinled.info/2...
░▒▓[Associated blog post & Mentioned in the video]▓▒░
No dedicated post for this video!
░▒▓[Music]▓▒░
Intro&Outro&During video
TheFatRat - Xenogenesis
( • TheFatRat - Xenogenesi... )

Опубликовано:

6 июл 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 44

@timpeterson2738 Год назад

I think you selling pre-made set ups is an awesome idea.

@UnoriginalEpinom 4 месяца назад

I'm running 1024 matrix from dig2go. All power injection is from the dig2go. The power is really quite impressive.

@DesignitBuilditRepairit Год назад

I just inject power in front which then powers the dig2go so I can inject power in multiple spots 😊 awesome product!

@EsotericArctos Год назад

I think the bundle idea, providing it could be economical, sounds really good. Maybe you could have a few options, like a 50, 100 or 150 pixel bundle? Definitely an interesting idea, especially for some nice holiday lights. I think DrZzZs used these early on and had some channel that the pixels could snap into as well if you wanted to do pixels in a straight line.

@michaeluncapher83 Год назад

Was able to get an order in for the d2g, can’t wait for them to arrive!

@petethomson Год назад

I got one as a test to see if its worth it over building your own.....I'm now replacing all my D1 based controllers with these.

@Dr44dst44l Год назад

Excellent video and the pre christmas advice, now we all have time enough to order those fairy lights for christmas (you can never be early enough and never order too many leds), can we have a follow up with an 241 pixel rings, a matrix 16x16 style maybe a few of them , cob lightstrip, and the Dig2go is excellent in fast checking ledstrips you already mounted somewhere or just have laying around.

@AndrewFroude Год назад

Great video. Shows lots of versatility. Thank you.

@stbjr Год назад

I use a dig2go and the fairy lights to upgrade my son's TNMT light to an awesome wled light.

@TheEddieSpangles Год назад

Thank you. Looking for something to control leds around 2 small windows. Great as always thank you

@rlhenry99 9 месяцев назад

Yes I would be very interested in buying pre-made sets

@olehivanishiv284 9 месяцев назад

Great video! Any of your boards support WS2818 pixels with constant current circuit driver method? (part# RA-WS2818-3LED-12V-PCBA-26mm-20 on Ali). Looking forward to new livestream with calculation help, Thx. Cheers!

@MrBobWareham 9 месяцев назад

It looks very nice, but I am in the UK, and I am unable to get a kit, so do you do a kit of parts to make your own or do you have all the information for me to make my own, as I just want some low voltage LED lights around the house that I can control with Wi-Fi. Thanks Bob in the UK

@MichaelLamerique Год назад

This is helpful to know that the Dig2Go can be used with other types of LED's. Do you think you'll make a video on how you spliced the pigtail?

@IntermitTech Год назад

Maybe in the future but the idea is to maybe make pre-made cables. It's just a straight through connection with a WAGO, nothing special. :)

@MichaelLamerique Год назад

I'm ready for those premade cables now. Came back to this video because I was lost on what to do at the connection point.@@IntermitTech

@wimkramer5330 Год назад

very interested to be able to order pixels with pigtail for a reasonable price. I'm going to use this with the dig octa system, powerboard 7 with two brainboards.

@ooglek Год назад

It would be awesome if the Dig Uno could have a native USB-C connector for power. I can get an inexpensive battery adapter that will take an input of up to 28 volts and output USB-C PD 3.1 voltages of 5, 9, 12, 15, 20, 28, 36, and 48 volts, maxed at the input of the battery. I don't yet know the efficiency, but now I can skip a buck converter which I use now for a 4S LIPO battery to drop to 12 volts out to the Dig Uno. I can do this with a PD Trigger board, but inspired by the Dig2Go the USB-C powering would be awesome. Will you ever build a 12v-capable Dig2Go?

@johnnyvandemoosdijk Год назад

Is it possible to use more than 150 pixels with a dig2go? because in the examples you use max 10w and dig to go can use 30w, so if you put a wago between the pigtale and power inject to the back or middle maybe 200/250 pixels are possible?

@thelastengineer8633 Год назад

can i get the effects ..or rather the presets in alexa? so i can activate them with alexa?

@TheOoze777 7 месяцев назад

Bought 2 of these, one stopped working. The power light comes on, but it is not reachable with wifi or USB. Is there a way to do a full reset of it?

@IntermitTech 7 месяцев назад

Use install.quinled.info and it'll be reset and reflashed!

@TheOoze777 7 месяцев назад

@@IntermitTech Tried that but my computer does not recognize the USB device. Is there a reset that can be done directly on the device? Not sure what happened to this one. It was working fine and then suddenly it would no longer connect to wifi or USB. The second Dig2Go is working just fine. Awesome controller, by the way!

@locosmuevenmundo 11 месяцев назад

what will be the maximum pixels without injecting an external power?

@IntermitTech 11 месяцев назад

Up to about 150 it's fine, beyond that they get a bit starved for power.

@matheokoning4456 Год назад

I was just looking at your site at the analog section and I noticed that the white light led strip with good quality are all not available in ip65. Do you know if this has any special reason or do you know (on aliexpress) also good quality but with ip65 rating?

@eclecticlight.design Год назад

IP65 break easily, I don’t recommend them.

@Bigglare Год назад

ooh where did you get the USB-C cable with the power meter?

@IntermitTech Год назад

I added it in the video description!

@danny7902 Год назад

I used the Dig2go with a fully charged 20.000 mah powerbank to light up a meter sk6812 led strip for my bedroom closet. I find out that the powerbank is out of power real fast. I thought the Dig2Go had a feature that prevents this power draining. The light didn't turn on that much. Does others have the same experience?

@IntermitTech Год назад

Yes the relay feature is by default turn on which means all power to the LED strip is cut so the LEDs won't draw idle power when turned off. The dig2go itself then consumes about 0.4w to 0.5w or so to stay alive which would give you a realistic standby time of about 66Hours or 3 days just being idle. I have an upcoming article which will explain more about this and how to calculate everything to see if what you are getting in regards to runtime is what you should be getting!

@ForbesPhoto Год назад

"currently only using 5.5W" clever

@joelevi 11 месяцев назад

3:59 isn't it pronounced "pal-let", not "pa-let-ee"?

@demochef 11 месяцев назад

I like his pronunciation better.

@joelevi 11 месяцев назад

@@demochef no argument with that. :D

@kmonty6188 5 месяцев назад

Hey bud, I bought a Dig2go last week. Can I combine neopixel rings in series with Led strips? The strips are BTS lighting ws2812b and he neopixels are the adafruit 12 led rings? I have tested both independently with the Dig2go but have not combined them in series yet until I verify. Thanks for any response.

@IntermitTech 5 месяцев назад

Yeah in theory that should work!

@kmonty6188 5 месяцев назад

@@IntermitTech thanks. One more. I thought I had RGB led WS2812s but in the WLED program the color order does not match. It seems when I switch to GRB it matches colors on the pallet and LEDs. Did I miss something on the packaging from BTS. I dont still have it. it works so thats good but just curious. maybe i missed a video somewhere

@IntermitTech 5 месяцев назад

@@kmonty6188 It depends on the LED chip used what the color order is, nothing wrong in that sense.

@VAKUL-DC Год назад

Please post the link to the usb c cable with power usage display.

@IntermitTech Год назад

Ah my bad, it's this one from Baseus: s.click.aliexpress.com/e/_DBarrTB

@IntermitTech Год назад

Apologies I actually used one from a different brand I was testing, that's a wotobe cable but functionally it's the same: s.click.aliexpress.com/e/_Dm82YYH

@VAKUL-DC Год назад

@@IntermitTech thanks for the link. between your mail vid and pileostuff testing all these cable, i was not sure which one is better/accurate. I will get the one you have. i have build ton of digiuno and quad but ordering the pcb and smds. so now i can only buy these rather build. since i have 2 dozen of these pcs, is there a way to add the mic/button on the digiuno/quad ? or you already have that on your website ?

@IntermitTech Год назад

Sure just check this guide quinled.info/dig-uno-quad-microphone-guide/