💥💥💥 Milwaukee M/18 Fuel 6 inch Grinder VS Dewalt Flexvolt 6 inch Grinder💥💥💥

Подписаться 19 тыс.

Просмотров 141 тыс.

50% 1

Episode # 102
In this video I go over the new The Milwaukee M18 FUEL 4-1/2 in. - 6 in. Braking Grinder, "Model #2980-20."
and compare it to the Dewalt flexvolt angle grinder."
Model #DCG418X1"I think what happens is quite surprising so stick around until the end and see witch one comes out on top.
Both of these grinders are the over all best grinders that I have tested, witch is every grinder
Please check out my other Social ------
/ makingstuffandbreaking...
🔊 Want more? Check out these links:
💥 • Kobalt 24V Tool review...
💥 • Kobalt X.T.R. VS Ryobi...
💥 • "New" Kobalt XTR 24V V...
💥 • Dewalt 20V Tool Review...
🔩🔩🔧🔧🔨 Tools and Materials:
DEWALT FLEXVOLT 60V MAX Angle Grinder with Kickback Brake, 4-1/2-Inch to 6-Inch, Tool Only:
www.amazon.com...
DEWALT FLEXVOLT 60V MAX Angle Grinder with Kickback Brake Kit, 4-1/2-Inch to 6-Inch:
www.amazon.com...
DEWALT FLEXVOLT 20V/60V MAX Batteries, 9.0-Ah, 2-Pack:
www.amazon.com...
DEWALT FLEXVOLT Cutting Wheel, 6-Inch:
www.amazon.com...
Milwaukee 18V 6 inch grinder:
www.amazon.com...
Milwaukee 48-11-1850 M18 Redlithium 5.0Ah Bat Pack:
www.amazon.com...
MILWAUKEE M18 REDLITHIUM HIGH OUTPUT CP3.0 Battery 2-Pack:
www.amazon.com...
KNOCK OFF 18V 5.0Ah Replacement Battery for M 18 Battery Lithium:
www.amazon.com...
🔊 Want more? Check out these links:
💥 • Kobalt 24V Tool review...
💥 • Kobalt X.T.R. VS Ryobi...
💥 • "New" Kobalt XTR 24V V...
💥 • Dewalt 20V Tool Review...

Опубликовано:

29 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 302

@LexisGalvan-zl2tn 5 месяцев назад

I have the same DEWALT grinder for about 2 months now and man that thing is a beast, as a person who works with mostly steel fences, this thing will grind/cut through anything

@markhill1526 4 года назад

That dewalt grinder is a beast

@BRENT3143945 2 года назад

Lol it stalled

@jordanalexander615 2 года назад

I have the original they look identical but mine is discontinued lol I think it's an issue with the wires coming loose or burning out in the brushless motor. I'm getting a new one for free thank goodness for warranty.

@rockpauly3200 Год назад

@@jordanalexander615I agree the DeWalt flexvolt Grinder is a beast I have one and it is by far more powerful than any other grinder of used it will eat up batteries though as in make them go from fully charged to Dead really quick

@mtanyctrainatlantamartatra7164 2 года назад

Cool powerful grinders, I'm happy with my kabolt cordless grinder I have for five years, still strong.

@Impact-OG 2 года назад

I have always wanted to test out the kobalt, I might have to get it with the battery deal.

@garybrown9719 3 года назад

I wore shorts recently do some light welding and got a second degree radiation burn It pealed 3 times

@Impact-OG 3 года назад

When I first started welding I used just those little eye classes thi gs and got really sun burned on my hole face. So I have since learned my lesson. Thanks for watching

@garybrown9719 3 года назад

@@Impact-OG when I was younger 45 years ago I was helping my dad hold parts and he was taking i gout my eyes burnt right through my eye lids had to put potato slices on my eyes.

@jamesweston3679 12 дней назад

I made the mistake of buying that 6" Milwaukee braqking grinder. After 14 months it failed. Milwaukee wanted $162 to diagnose the prob and then parts and labor to fix it. It was replaced with a Flex grinder and all of the Milwaukee tools I have are being replaced with the Flex tools as the Milwaukee tools fail. Milwaukee lost my business permanently.

@Igor-q3f 2 года назад

Just watched a video about a flexvolt rear handle saw vs Milwaukee with a 12ah rear handle. Same issue with the Milwaukee batteries overheating and the guy kept saying you can use any m18. In high demanding tools higher voltage works better.

@mikemorgan5015 5 лет назад

Milwaukee decided to stick with the M18 platform to keep their customers happy. That came with some serious consequences due to the limitations of lower voltage/higher current. They HAVE done an incredible job of delivering with the HO batteries while still making the tools work(albeit with lower performance) with the standard batteries. Both great tool manufacturers with great tools. If that 9ah battery was hot going on the charger and you just got it off the charger(especially a rapid charger), it doesn't take a lot to get it into thermal shutdown. A 12, 8, or 6 HO should fare better. I don't use the rapid charger unless I'm in a time crunch. Fast charging will almost certainly shorten battery life, but then again, a 2000 charge cycle rated battery can be charged every day for 5 1/2 years, so maybe not an issue at all. Just my anal retentive nature about battery care, I suppose. I would like to see Milwaukee put a cooling fan on their chargers like Makita.

@Impact-OG 5 лет назад

Yes a cooling fan would be great. In part two coming out soon I get more in depth with the Batterys I just got my 8.0 HO battery, So I test the 3 HO, 5xc, 6HO, 8 HO, 9HD, and the 12 HO battersy and talk about run time and if they over heated or not. Its kind of boring but informative. Well at least I find it informative. And thanks for watching...

@jordanalexander615 2 года назад

They are perfect for winter work lol warm up your hands and charges quickly.

@mcqcjc8409 Год назад

Milwaukee Super Charger has 4.5A on M12 and whooping 13.5A on M18. Charger has built in fan inside as well.

@mikemorgan5015 Год назад

@@jordanalexander615 Yes a lot has happened in the last 3 years.

@Valera895 4 месяца назад

DeWalt 9Ah battery in the region of 2.1 kW, 9Ah Milwaukee 1.2 kW, it is natural that the Milwaukee battery will heat up ------- incorrect comparison of the tool

@bentlikeitsmaker 2 года назад

And by the way the thing about speed with that 4.5 inch bonded disk actually same rpm just different disks all sound a bit different between brands honestly just the dewalt seemed to slow down the rpm under light load faster

@mcqcjc8409 Год назад

Using standard xc battery will give u, depending on amount of cells either 30, 60 or 90Amperes. Multiply by 18v and u get 540, 1080 or 1620 Watts. That means only 15 x cell xc battery can deliver enough juice for this grinder. 5 and 10 cell batteries will not give enough juice and will get hurt. On the other hand the High Output batteries are made of 21700 cells ... Developed for tesla by Samsung BTW.. Its called Samsung 40-T. These HO batteries can deliver 40/80/120 Amperes.... 5/10/15 cells. That means u can pull 720/1440/2160 Watts. So even the high output 5 cell design won't be enough., u need at least 10 cells of 21700 or 15 cells of 18650(xc battery)

@pepethebay 3 года назад

Is this the 20 V max or 60 V Max deWalt grinder ?

@petershaw27 5 лет назад

Did'nt see any comparison? You used different materials and only did 2 cuts through the rebar with the dewalt.

@Impact-OG 5 лет назад

No I didn't I compared the 4.5 inch disks and I did the chop test in the intro, and then the rebar and the Dewalt has way way more power, I was really disappointed because the Milwaukee kept over heating all the battery's. But I go over stuff more in part 2.

@petershaw27 5 лет назад

@@Impact-OG ye I know you did in the intro,what I meant was when you was showing how long it took for the milwaukee battery to cut out,you used different materials.If you had used the same material for the dewalt and ran it until it cut out that would have been a comparison.

@Impact-OG 5 лет назад

@@petershaw27 I used the same rebar!!! And the test was a timed test the Milwaukee could not cut through it multiple times as it took the DeWalt one minute and 20 seconds to cut through it multiple times.

@petershaw27 5 лет назад

@@Impact-OG Haha. How stupid do I feel. I just re watched the video,it's the different angles of the camera that made me think the milwaukee was going through thicker stuff. 100% apologise. P.S Nice video

@4wdadventures941 4 года назад

Instead of testing a 60v vs a 18v... why not test an 18v vs an 18v. That would be a better comparison.

@Impact-OG 4 года назад

Well this was a build up were I was looking for the best cordless angle grinder, I habe a few other angle grinder video, not that good some of my first videos, I was on the hunt to the bast one, at these were the top two I decided on!!

@4wdadventures941 4 года назад

@@Impact-OG Ah makes sense now. Really did like the video since you actually tested them unlike others where they un box and talk about it!

@bentlikeitsmaker 2 года назад

How is the runtime with the large size batteries I'm mainly looking for a grinder for light blending and wire wheel for when I'm doing welds that get ultrasound tested

@Impact-OG 2 года назад

So when I did my testing it was of none stop down word pressure. The larger 8.0 and 12.0 ah battery's last a very long time. I cant remember the exact number but I want to say over 30 min of none stop cutting !! it will last most of the day if not all with light on and off use. as for the dewalt it has more power and will eat battery's a little faster, I only tested the 2.0/6.0ah, and the 3.0/9.0ah battery's so I am not sure about the 4.0/12ah battery.

@herbertherbomoore415 4 года назад

Show #2 please!

@chaseblackledge9778 2 года назад

This is bull. He had a sharper blade on the dewalt

@Impact-OG 2 года назад

Oh stop, They both had on 6 inch thin metal cutting disks from harbor freight. The Dewatl just has more raw power its a 60V but the Milwaukee has way way more run time So what are you looking for in your grinder is the question?? Thanks for watching man.

@blackriflear15 3 года назад

Not even close

@scottpittsinger1654 7 месяцев назад

BOY, SET TOO LONG. YOU TEMPERED THAT TEST

@nickrangel139 4 года назад

Milwaucope.

@Syke492 2 года назад

*It made the metal cutting go very smooth with the right kind of blade **MyBest.Tools** I didn't use the blades that came with it though. I had a bit of trouble with the guard, but besides that it is a great tool.*

@Curiosity_Cars 3 года назад

look how he cuts with the milwaukee vs Dewalt lmao.. More aggressive stance, Less stopping and starting, Pulling blade in and out. like wtf lol No way there would be 1+ mins between them.

@VacMaster1991 2 года назад

I know right. Plus with tools like these you need to be using 8ah high output or larger.

@adam8323 4 года назад

I have Milwaukee and Dewalt tools. I actually own this Dewalt grinder. It's a beast. But if you are gonna compare at least make it fair. Use high output Milwaukee batteries which were intended for this tool. Also you say Dewalt cut it in half the time. Well Dewalt cut in 1:23, Milwaukee in 2:03. Using HO battery it would have been even closer. Also did you use two identical wheels?

@lukeboren3741 3 года назад

But if you look at 0:01 you see he has a high output battery on the tool?

@wolfdenauto3417 2 года назад

He's using a HP battery on the Mil. Moreover he's using the DCG418...it's king of the grinder world

@NathanEsh-w5c 7 месяцев назад

You weren't using a high output battery all the time🫡👎

@philipjohn4149 2 года назад

The 414 flex grinder is one of the best cordless tools ever made. The ergonomics the switch the handle the power the run time. Fast charger and no fuss at 60v. Spindle nut is nice too. Now we have 418 and 440. Dewalt 60v is another class of tool. Milwaukee HO okay for small job. But cost is to high for the performance and heat damage to batteries.

@brendanmoll4799 5 месяцев назад

The dewalt does seem better but a 6 amp high output battery is the minimum size you’d ever want on a grinder a 9 amp flex volt vs a 5 amp battery meant for drills and impacts isn’t exactly a fair comparison

@connerjones4708 5 лет назад

Nice job man, I have been wanting to get me one of those too, but there expensive

@theronpeavey5308 3 года назад

They are so worth it though. I've had mine for 2years now, and I use it everyday. I'm a metal fabricator, welder and Ironworker. Still hasn't quit. Beast of a tool.

@anguianosboy 2 года назад

Aaaaaaaaand this make me.think twice to buy cordless tools.. i gues those are for light duty things,, since i do cutting and grinding for long periods,, this tools wont hold , i m staying with my regular tools

@scanyoursector5731 5 лет назад

I love both DeWALT and Milwaukee cordless tools. I own 25+ DeWALT and 10+ Milwaukee cordless tools. I have noticed that the Milwaukee batteries go into thermal overload or over heating mode very often. That really kills the tools performance when you are depending on getting a job finished!

@Impact-OG 5 лет назад

Oh nice man, Yeah I dont have many larger tools that draw a lot of power like the angle grinder, but it did over heat the 3.0 HD, 5.0 , 6.0 HD, and the 9.0 HD battery's, it wasn't able to over heat the 8.0 or the 12.0 those are both the High Demand battery's and work really well.Thanks for watching man..

@missingegg 3 года назад

@@Impact-OG I think you're being a little unfair here. The power draw of the angle grinder means that it is best paired with a "high output" m18 battery, which is their newest line of batteries utilizing 21700 cells instead of the older 18650 cells found in the high demand and extended capacity series of batteries. You're giving good info to let people know that their existing investment in M18 batteries might not be good enough for a new angle grinder, but the tool paired with the proper battery shouldn't have the same heat issues.

@philipjohn4149 3 года назад

I have all the grinders. Dewalt is so much better. Milwaukee at 6 or 9 in will damage 18v battery even a 12. In fact the 6 is the best for Milwaukee... for heat protection and to now end the life of HO batteries. A 6 will have a higher amp rating per cell and handle the tripping out better. Won't have the runtime... but 2 -6 amph will. And destroying a 12 has lost all run time. It's such an issue at 18v that Milwaukee really should buy back the big tools and bats that cant handle the heat.

@TheDaztheraz 3 месяца назад

Have had a Milwaukee battey fail after about 8 months, only used occasionally for my wet vac, luckily still under warranty, touch wood not had any dewalt batteries fail

@jps101574 5 лет назад

Of course the Milwaukee will cut out faster than the Dewalt. The Dewalt had a much more powerful battery. Dewalt's 9.0 battery has bigger cells and can put out 75% more current than Milwaukee's 9.0 battery. You will have to use a Milwaukee 12.0 battery for a fair comparison.

@FusionBoost2.0 5 лет назад

Still can't compare

@battlebob 5 лет назад

@@FusionBoost2.0 Kinda right there he didnt compare.

@alexbernard8579 5 лет назад

Actually in series current is going to be the same everywhere unless you connect batteries in PARALLEL. So yes the 12 Ah battery will be more of an even playing field for the Milwaukee but you are going to want to check out the voltage which we know, and explains the power difference. FWIW I still recommend there Milwaukee Brushless fuel model as it is a power house and I cut through rebar in seconds at work! This guy doesn't have a good blade and it is all about blades when cutting through steel, we all can agree on that. Maybe that Milwaukee blade was for mild steel? Who knows. Not a fair video by far and Milwaukee Obv wins if it were!

@dylansterio3227 3 года назад

At 54 volts the dewalt battery only has 3ah

@PyroAnonymous 3 года назад

Incorrect. Both batteries are 9AH @ 18v/20v max, but the flexvolt is actually 3 AH @ 60v max. The only reason the Milwaukee cut out was because of Thermal Resistance the tool faces because of the 18v battery. Higher voltage is actually better because you'll need less amps to achieve the same power compared to something running at a lower voltage. Amps is what's responsible for generating heat in the wires which causes thermal resistance, which bogs down the tool. To overcome the resistance, you'll need to draw more amps, and more amps = more heat.

@aristeocortes973 4 года назад

Milwaukee fans are getting toxic🤣😂

@rcud1 3 года назад

I have several Dewalt tools and several Milwaukee tools. Lets not pretend one is better in every category.

@loucifer323 3 года назад

Most of your Milwaukee fans are not in construction

@colocaomantequilla1289 2 года назад

@@loucifer323 go to any job site in texas. there’s more Milwaukee than dewalt. especially in metal trades (architectual and structural).

@michaelwhisman345 3 месяца назад

I can’t say enough good about both brands they are tough tools I have Milwaukee on my service truck and Dewalt for home use the Milwaukee holds up better in the dusty rock quarry I work in but my shop tools are all dewalt

@christopherbeddoe406 3 года назад

Just can't complete with the higher efficiency of having more voltage on a grinder. More power delivery with less current = less waste heat.

@imbrandon16 4 года назад

Bro, I'm not your boss, and i'm not your safety guy, but i'm telling you for your own good, I don't know how familiar you are with Zip wheels, but you really shouldn't run them that deep into the material, you want them as shallow below the surface as possible, when you're cutting deep like this @ 7:49 cut down through the top, not straight head on into it, you're 10X more likely to bind up that blade causing it to break and send shrapnel everywhere, which could seriously hurt, or even kill you.

@JuanRamirez-di5tg 4 года назад

Thanks for the advice dude

@thebrandonlee8264 2 года назад

The Milwaukee grinder works a lot better with the HO battery series! Not sure if it’d beat the Dewalt but would have a better chance, never have overheating issues and it’ll literally cut threw anything!

@alexteixeira27 2 года назад

for Milwaukee fanboys like me that mad because that DeWalt grinder is better, even if you pair m18 grinder with 6 or whatever battery you want that DeWalt is a monster. I enjoy using both of em.

@Impact-OG 2 года назад

Yes me too. Dewalt definitely more power, but the Milwaukee will last longer. Thanks for watching

@nsxproperties560 2 года назад

You need to use a High Output battery in the Milwaukee. That Grinder is designed to be used with high output batteries.

@NathanEsh-w5c 7 месяцев назад

Exactly

@gheufbfff 3 месяца назад

@user-pb1qo9ke1q yeah, you need to use a 400 dollar battery to run the 300 dollar grinder lol. Milwakee fan boys lol. Stfu

@andrey_sen 3 года назад

Incorrect comparision and conclusuion. You compared two grinder 54v 9ah battery and 18v with 9 ah non high output batteries and 6 ah high output. In comments you wrote that 8 and 12 ah HO batteries not overheat, but not used it in test. It's obvious that not HO batteries will overheat and show less performance. So you just have to make next video with this batteries :)

@Impact-OG 3 года назад

OK first off if you don't believe me that is fine, and this test is for two 6.5 inch grinders not 60 vs 18 or 54 vs 18, I was going to make a part two follow up on this but I ended up selling my Dewalt grinder. Yes the 12AH Milwaukee battery did over heat, not as easy as the 3,4,5,6,and 9 but it did, the 8 I had to beat the hell out of it to get it to over heat, but with normal use I dont think it would. Thanks for watching man

@garybrown9719 3 года назад

Im luck i don't have to use harbor freight cut off wheels I find them in dumpsters all the time I bid on 2 dewalt grinders Dewalt just. Came out with a more powerful 60v grinder

@verminfate7074 4 года назад

Dudes got a milfucki and uses harbor freight blades(Dam) no hate tho

@Impact-OG 4 года назад

Because I am just wasting blades in the video, I save my good stuff for when I'm working on a project!!! You know what I mean.

@terybigmoneyr9398 3 года назад

Part #2 I would also like it if you could show more of the battery indicator while doing your comparison?

@giovanniamoruso2811 4 года назад

It works a lot better if you used the M18 high output batteries instead of the regulator hd batteries since that grinder is optimized for that battery.

@Impact-OG 4 года назад

Yes i know, I tested every battery from the 3.0ah hc, to the 12.ah HD battery.

@Clamjammer 3 года назад

Dewalt still has more power

@SwapnilBhartiya Год назад

@@Impact-OG Do you have a video of HO battery? I want to but one but I am concerned.

@the_visionvry6244 3 года назад

dewalt released the new dcg418 model with 30% more power over the one in this video dcg414

@LynnJynh9315 2 года назад

You deliberately restarted cut your w/ the Milwaukee twice. You could've cut through in 1.75 min easily. Utterly dishonest. Seriously, people. Actually watch the video.

@damianwalters5657 2 года назад

DeWalt is the BEST grinders on the planet nothing else even comes close. However the flip side of the coin Milwaukee owns the BEST Sawzall in the world the orbital super sawzall kills everything.

@viperstrike3827 5 лет назад

I know that when dewalt finally comes out with a cordless 7/9 inch grinder its going to be the best one on the market we my see a 120 volt cordless.

@skatewithvanz 4 года назад

Viper Strike doubt it , youd need 120v to charge batteries and being that high a voltage it would be to close to charge youd need a stepup transformer built into the charger then a bridge rectifier to convert it to dc power

@skatewithvanz 4 года назад

Cool but now you need 4 batteries to charge 2 while you use your other 2 not to mention a charger with at least 2 ports (checkmate jk)

@skatewithvanz 4 года назад

Yikes

@raunefare 4 года назад

Or you could just live in Europe 230v xD plus normal outlet 230v 10/16amps 3600w and you only got 120v 15amps 1800w. How do you get anything done is beyond me 🙄

@mikekahotea9197 4 года назад

If they do come up with one 9 inch DeWalt ..... I'M IN (if it's good enough) , so far I've been using my cordless 690 cut off saw to cut heavy Steel . It's not the greatest but it'll do .

@mrmanitoba 3 года назад

I have Milwaukee tools and I was leaning toward that one but after watching this, I guess not.

@rookiexreviews 3 года назад

same here got allll Milwaukee I just ordered the flex grinder tho

@zztopinthehouse 3 года назад

Buy the milwaukee. Its a great grinder.

@jeffarnold1983 5 лет назад

Bring on part 2. I have the dewalt and love it. It has as much or more power than any corded grinder.

@Impact-OG 5 лет назад

Oh totally Its a beast !!! I am a little disappointed that the Milwaukee would keep over heating battery's like it did. I dont know the out side temp shouldn't matter when you use it. but it was very hot out side.

@jeffarnold1983 5 лет назад

18/20v just can't compete with 54/60v. You have to give Milwaukee credit for doing as well as they did with 1/3 the voltage.

@redrhino3041 4 года назад

Jeff A no not really when you look at the cells in the batteries flexvolt and the high out batteries are basically the same go check out ave he takes them apart

@Clamjammer 3 года назад

@@jeffarnold1983 Milwaukee lost. So there’s no credit to give

@connors.1077 3 года назад

@@redrhino3041 The current through any given cell is the same, but the current (amperage) through the interconnects, power electronics, and motor is ~3 times higher in 18V tools. This isn't necessarily a good thing, as wasted power (heat) is proportional to the square of current, and partially explains why even recent Milwaukee Fuel tools tend to have more issue with thermal cutoffs than Dewalt FlexVolt tools. Dewalt has different challenges working with high voltages since the control electronics are higher resistance, motors need to be wound differently, and PCB traces need to be further apart for voltage isolation reasons.

@stephaniedupeyronxalfredot2670 4 месяца назад

Las dos amoladoras tiene el motor del mismo amperaje, pero dewalt función con 60 volt y Milwaukee con 20, eso hace que la batería se caliente en exceso

@mtanyctrainatlantamartatra7164 2 года назад

That's strange, why is my comment appearing 4 time's

@Impact-OG 2 года назад

Yeah I saw that. Your just trying to boost my channel thanks buddy

@robswingler 5 лет назад

Your using a hd 9Ah on the Milwaukee you need to use the HO batteries only (6ah or 12ah )to get the same performance as the flexvolt . The Milwaukee 9Ah aren’t designed for high output

@Impact-OG 5 лет назад

You are right I said I did all the testing with EVERY BATTERY that I am posting in part two!!! I was just showing you that it over heats after 3 min of use!!!!

@robswingler 5 лет назад

Making Stuff and Breaking Stuff with Al does it overheat with High output batteries? It’s like putting a non flexvolt dewalt battery on (20v xr range) the 60v grinder . But it won’t work at all on dewalt

@Impact-OG 5 лет назад

It over heated every battery but the 12.0, It wasn't like I was using it super hard, a couple of the battery's over heated in under 60 seconds !!!!

@W3TFART 5 лет назад

Dewalt is king take your toy Milwaukee back to the sandpit .

@aaronrudd2690 5 лет назад

King of trash tools

@haydensantos6474 2 месяца назад

Heavy duty use cuting quarter inch stainless steel every day. 4 years old. DEWALT

@bentlikeitsmaker 2 года назад

As well atleast this grinder is good there brushless corded grinders are junk especially the 7 inch think about this putting a 13 amp motor on a 7 inch that typically has a 15 amp motor keeps burning out the electronics yet is supposed to have all this protection circuitry

@TomNord1 11 месяцев назад

what would happen if Milwaukee had a 60 volt battery??? Put a 18 volt battery in the DeWalt and see what happens!

@mikekahotea9197 4 года назад

That must be the flexivolt 414 like the one I have . That grinder is a mean machine , I use it daily and it has never let me down on important heavy jobs . I scored me a couple of 12 amp flexivolt and Maan my work hours are done in half the day . Apart from the 414 I am seriously getting the DeWalt 418 which has more runtime, bit more power . Also I am thinking of getting a Milwaukee cordless grinder for my Milwaukee platform cause of colliding contracts that I do suiting general steel fabricating to carpentry related work... Almost there . Waiting for a good Milwaukee grinder to arrive .. if ever one does

@SuperPhoReal Год назад

I would’ve just hop on the xgt makita grinder. Wayyy better.

@nsxproperties560 2 года назад

I use the Milwaukee in the 8.0 and it, worked pretty good. I would use 8.0 in grinder.

@jordanalexander615 Год назад

It is true the bigger batteries run cooler. But that's where DeWalt using 60v helps more. The batteries seem to stay much cooler for longer.

@chavivillalta8290 2 года назад

@ around 12:50 into the video it looks like you use a 4 maybe 5 ah battery and not the 9ah like u claim bro towards the end of your video compare to 9ah from the dewalt

@mikekahotea8148 2 года назад

Thank you for your time and effort in making this video much appreciated

@paulw9732 5 лет назад

I bought this 2980-20, it eats battery’s for breakfast! It is much more powerful and not much bigger than the old 2780-20 I got 6 batts and 3 chargers going I’m waiting on a battery lol. I got all the h.o. Batts and Xc batts above 5.0 surprisingly the 9.0 xc runs the best, considering they recommend a h.o. ! I also own a 2783-20 I believe the brake on the 2980-20 is what’s cooking the battery, unlike the 2783-20.im running a 6” grinding wheel

@Impact-OG 5 лет назад

Yeah I really like mine, when I was testing mine I had a 6 inch metal cut off wheel on it and it was overheating all the batteries except the eight and the 12 but I was cutting through a 2-inch thick rebar was mine which is unlikely for anybody to really do. but I figured on the job site it's not uncommon to try to cut through something that big.

@paulw9732 5 лет назад

Making Stuff and Breaking Stuff with Al I finally busted mine out for the first time today ( had it for 2 weeks) I was impressed by the power for a fairly big job, just could not beleive how much power it used.all that kept playing in my head was the music from this vid. I was excited to get to use it. Lol

@shiningstaer 5 лет назад

You used the 9:0 am with the grinder, you need the 6.0,8.0, or 12.0.

@jessemichalies 3 года назад

I agree this grinder pretty much requires ho batteries.

@pietromoopy2010 2 года назад

Lower voltage and higher current = more heat. Higher voltage and lower current = less heat. At the same draw producing the same amount of power, the higher voltage/lower current will always produce less heat then the higher current/lower voltage. To add to this, excessive heat is terrible for the lifespan of Lithium Ion batteries. Therefor dewalt wins. However dewalt batteries are misleading and done so on purpose I'd imagine. For example a 60v 6AH battery will not get you 6AH at 60v. Notice how it says the AH on the 20v side and not the 60v printing. This is because the battery is 6AH at 20v and 2AH at 60v. Marketing B.S. so that people will OOoh and Ahhh. If you are using a 60v dewalt battery, just divide the AH by 3 and that will be the true AH at 60v.

@xPPBx 2 года назад

It’s just because the voltage is flexible they have to make it clear what ah it would be in the platform everyone knows

@TheChico868 Год назад

Damn. Thank you for info

@Set_your_handle77 4 года назад

We're you using the same blade? Would it make much of a difference?

@owjfabrication6822 3 года назад

@josemora9666 2 года назад

Year right the milwaukee is not that weak

@Impact-OG 2 года назад

OK I never said it was weak!! The Dewalt just has a little more power. BOTH ARE EXCILENT TOOLS. Thanks for watching

@whatthehellimbored 3 года назад

Wearing shorts while using a grinder lol

@victorvictor8311 8 месяцев назад

Make real video why you cut the sound of we need to hear voices to know it's not fair

@BRENT3143945 2 года назад

I use 12ah batteries for my m18 6in grinder

@gs300ondub 5 лет назад

Wow, looks like the Milwaukee fan boys are getting butt hurt lol

@joewalker3021 4 года назад

you are compering 18v to 60v hows that fair?

@gs300ondub 4 года назад

@@joewalker3021 don't bring a knife to a gun fight, 💪

@linkstale 4 года назад

@@gs300ondub i love dewalt but even im scared cus milwaukee is gonna come out with with a new gen of powertools thatll destroy everyone except for dewalt of course

@kundetjenesten 4 года назад

It is hard to beat the Flexvolt grinder in terms of performance, and that is nothing to be butthurt about. Rather it is a good thing for us as consumers; it forces the big tool producers to stay on their toes. I'm on the M18/M12 platforms but I can appreciate when someone does something right. One thing I would like to add though is the madness of pushing down hard on a grinder, that is the reason why some guys have to buy a new grinder every year while others have theirs for ages.

@bigchungus7720 4 года назад

I use both brands just deciding which I should go with

@williamm4334 2 месяца назад

its not the same metal he was cutting with the default.. why?

@dumitrascuclaudiu7097 2 года назад

Milwaukee, overheating is persistent over many power tools!

@truthserum9157 2 года назад

I have 2 Dewalt grinder, one for grinder the other set up for cutting.

@gear-arquitectocastleclash7738 Год назад

What model usong for what?

@truthserum9157 Год назад

@@gear-arquitectocastleclash7738 - I use one DCG418 as a grinder and the other DCG418 with a metal cutting blade on it for cutting metal only, like that you don’t need to go back and forth changing blades.

@danielglaus7144 2 года назад

No compare and IAM DeWalt your did cut the same shit dude

@truthserum9157 2 года назад

There’s a new DCG418 that’s even better than the DCG414.

@josecortez5213 3 года назад

I like the brutal tests. New subscriber here

@Impact-OG 3 года назад

Thanks man I appreciate it.

@mcqcjc8409 Год назад

Milwaukee says its equivalent of 13Amperes. That being said it means 13x120=1560 Watts. Now your milwaukee xc battery delivers ca. 60amperes with 10 cells... That is 60x18=1080

@gabakusa 2 года назад

where is part 2?

@NathanEsh-w5c 7 месяцев назад

Is that Milwaukee's latest grinder?

@matthewderden424 4 года назад

It was an unfair comparison because you didn’t use he High Output Milwaukee battery which it is designed for and milwaukee says it adds 50% more power vs the non HO batteries.

@Impact-OG 4 года назад

I have done extensive testing with these two grinders with all batterys and the only one that didn't cut out is the 8.0, the 12 did the 9.0 did and so did the 6.0 and 3.0, so yeah. There will be no part two as I sold both of these a long time ago to buy other stuff. Thanks for watching

@lil.dark.one. Год назад

Everyone needs too remember that you can buy that Dewalt with (1) DCG418 60V MAX Brushless 4-1/2 in. - 6 in. Cordless Grinder, (1) DCB609 Flexvolt 9.0Ah Battery, (1) Charger, (1) Side Handle, (1) 4-1/2 in. (115 mm) Type 27 Guard, (1) 6 in. (150 mm) Type 27 Guard, (1) Wrench, (2) Flanges and (1) Kit Bag Up to 30% more power vs the DCG414 Brake engages when the trigger is released with stopping speeds of 1.5 seconds with standard grinding wheel Kickback brake engages when a pinch, stall or bind-up event is sensed. The electronic brake engages with maximum force to quickly stop the wheel, reduce the movement of the grinder and shut the grinder off E-clutch activates in less than a tenth of a second when a pinch/stall is detected, shutting down the motor 9000 rpm no-load speed for applications with 6 inch grinder wheels For $330 That Milwaukee with just the grinder and nothing else your looking at $250 It dose the same thing the Milwaukee will and will last just as long and cost way less for what you get. Dewalt is a working man’s tool Milwaukee is a grandpas tool.

@mtanyctrainatlantamartatra7164 2 года назад

Cool powerful grinders, I'm happy with my kabolt cordless grinder I have for five years, still strong.

@galvanizedgnome 2 года назад

Beta

@JamesBond-py8xs Год назад

I just got a Milwaukee M18 lithium cp 2.0 battery thst was $90 and it sucks!! 2-3 minutes use at the most then 30 minutes to charge. My M18 xc isn't too much better. I have other Dewalt tools with a fast speed charger so think I'll just get a used Dewalt cordless grinder now or w/cord. The grinder you're using seems great if the battery will work with my charger

@marculiana4816 3 года назад

I think this could be a commercial for dewalt, I'm not sure ... it was a short break in filming after he finished cutting with milwaukee ,,, he took out the battery but didn't show the LED indicator directly, the pause appears after which take milwaukee with the battery mounted but the moment when he puts the battery back is not seen in the filming !!!! which battery did he put ???!!! milwaukee and dewalt or other brands no longer have the same quality as in the past or since they have been manufacturing in china, the quality of the materials is weaker ... tools of the new generations breaks to the electronic part .... at first the amazement for performance and then the disappointment ... for marketing reasons it is produced at the lowest possible costs with capitalization at the highest exorbitant prices so that robbers boys in suits can live well as far as I know neither dewalt nor milwaukee have fan chargers like they are at bosch or metabo with air coller ... at the prices they are they should have put a minicoler on and powered by the battery to start when the battery starts to run out warm up ... that gives me the idea to bring this improvement to my batteries

@huanle695 3 года назад

You cant be using flexvolt battery on the dewalt and uses regular 5.0ah for milwaukee since its fuel why dont you use another bath that match up with the flexvolt battery. Not balanced!

@thedude8976 3 года назад

I have the Dewalt its a Beast

@Impact-OG 3 года назад

Yeah I feel like the Dewalt definitely has more power then the Milwaukee. Thanks for watching man

@boringsoaring Год назад

No guard at least put on two gloves

@manuelleyva8991 Год назад

I love dewalt the best grinder

@wakeupcall8188 4 года назад

Nice video mate I agree about batteries I have a question regarding milwaukee grinder I had it for a wile Used occasionally sometimes for long, sometimes short periods but nothing heavy duty But today start makes funny noise and smoke I've opened up couldn't do anything As it cools down still working but not like it used to Any ideas

@jordanalexander615 Год назад

Could have a wire broke in the brushless motor. Which is pretty much impossible to repair. But could also be the gearbox getting worn out. Some proper greasing might have saved it but who knows. That's the problem with grinders. Lots of heat, lots of fragile internals, and it takes is a big spark finding it's way inside to burn a wire. Or just a short from a battery frying the tool.

@cmal90 5 лет назад

Milwaukee keep going on about being on the same battery platform clearly a dig at Dewalt and the flexvolt system. It seems clear that technically yes it’s the same Battery platform but there are now tools that you can’t use 4 or 5 amp packs on like the high demand tools meaning a purchase for users even although they already have multiple 4 or 5 amp packs, and then equally your newly purchased high demand packs 9 or 12 amp packs don’t really work that great on say an impact driver because it’s then heavy and unbalanced & a bit impractical. So they have ended up with 2 systems really.

@tommyfitzgerald8045 5 лет назад

Disagree with that I can use a 2 amp in my fuel sawzall or a 12 and there is many more tools you can use the full range in like the the circular saws and sds drills.. on a work site if you are some where hard to get to and you are using an impact driver and the last battery you have left is a 12amp it's so handy just to be able to use it may be awkward but it works.

@petepistachio8229 5 лет назад

This is where red china fools their lemmings. They just are selling higher powered tools with underpowered batteries. Now they scammed their users into buying “HO” batteries. Hahahaha. Fools. Why do I want a 2ah battery to fit on my 12” Mitre saw, table saw, concrete saw, grinder, etc??? This is where Milwaukee will get left behind in the future OR look foolish by going back on their word and make a new battery line or do a Makita and start putting multiples of those toy batteries on their toys. I hope they don’t, and just go the way of the Dino.

@dangerousfandango5943 4 года назад

Foreals, the still need 2 different batterys.. doesny matter the voltage lol...fanboys are like oh no... you need the h.o battery lol

@strizzy239 2 года назад

I really want Milwaukee to make an adapter to plug in a “cordless” grinder to the wall. My radio and my fan can both do it; why not a grinder? Most of the time especially when I’m welding I got power so it’s just as easy to plug in and would be awesome to have infinite runtime. I can’t believe they don’t already have this.

@levis3131 2 года назад

Biased comparison.

@jonasausiura8770 5 лет назад

Thanks for the upload, great stuff. I was wanting to pick up the new M18 grinder kinda just to have it but having the Flexvolt grinder, I think I might spend my "tool itch money" on something else lol

@Impact-OG 5 лет назад

It's hard there's so many awesome tools to pick out, so little money... hahah thanks for watching

@jamesfair9751 4 года назад

If you gonna get a new grinder get the new flexvolt grinder. It’s even stronger 33% stronger and they come with the 9.0 ah batteries now too. Looks identical and only way to tell is the item number old flexvolt 414 new flexvolt 418

@jayross6588 4 года назад

Janes Fair right on, I didn’t know that they had a newer model out. Thanks for the share.

@aubertbethencourt3241 2 года назад

Dude I don't doubt that the Dewalt grinder is good but look how your pressing it into the rebar and the milwaukee your holding it ever so gently.

@jorsotmex7com 3 года назад

Milwaukee 👉👌 dewalt

@meanodustino9563 5 лет назад

I have Milwaukee but I dont care which one of these grinders is best. Im just impressed you can get 6” cordless and now 7/9” as well. Totally unreal we have can these tools. Though i have my suspicion Milwaukee will come up with a better battery platform in the near future and screw their customers. Usually how corporate operates.

@Impact-OG 5 лет назад

Yes that is very true!! I would love to try the 7/8 inch grinder..

@chaseblackledge9778 2 года назад

Apple dose this to their customers every year. And people buy it up. Milwaukee can do it because they have a colt that won't care. They will buy. And if a company can upgrade they're tools I'm all for it. Even if it means having to buy all new shit. I want the best tools. I've owned both dewalt and Milwaukee. I prefer the dewalt. I haven't really needed to replace anything like I did Milwaukee

@mastermultiservicios 10 месяцев назад

Wey need the parte 2

@tanker2051 7 месяцев назад

Hmm suspicious

@martinmeaney340 2 года назад

Great video and also you realy remind me of buzz from home alone

@shawnbowman687 3 года назад

Not to interested in the grinders so much but the high torque 1/2 m18 impact has put a many of pneumatic Matco and snap on guns to shame. The snap on cordless 1/2 doesn’t even come close to the Milwaukee. Blew my mind that it would take rust lug nut off a semi truck that our big IR gun struggled with.

@wolfdenauto3417 2 года назад

Uuuhhh....and when you go to maintain the Milwaukee impact you'll spend 30 minutes taking the entire tool apart just to grease inside the nose cone. Absurd.

@jlbknives5722 2 года назад

@@wolfdenauto3417 you’ll save those thirty minutes time over again using the Milwaukee cause it works faster.

@wolfdenauto3417 2 года назад

@@jlbknives5722 that's funny..... Care to square them off? The Chinese made Milwaukee nearly impossible to maintain or the USA made DeWalt that is long term user friendly being much easier to maintain. P.s. Think about that hard. We have both brands in the shop. ;)

@jlbknives5722 2 года назад

@@wolfdenauto3417 there are plenty of videos out there comparing Milwaukee snap on etc out there and the Milwaukee impacts have been shown to show better torque specs battery life etc. I’ve taken my 1/2 mid torque Milwaukee apart and greased it with reassembly in less than 15 min if it take you 30 min you’re working slow. I’m not saying it’s the easiest to maintain but when you save the time dealing with air lines and lack of performance I’d say it’s worth it. You can also take the battery powered Milwaukee/dewalt anywhere can’t do so with corded or air tools.

@wolfdenauto3417 2 года назад

@@jlbknives5722 I'm not talking about Snap-on (although it can be greased in 30 seconds) I'm talking about DeWalt which can be maintained in the same 30 seconds has ridiculous power...and best of all Made in 🇺🇸 FYI... per a rep from Milwaukee three weeks ago...Milwaukee at present does NOT make one cordless tool in the United States of America. They make a couple corded sawzalls (not all) and they make a magnetic drill press (not all) That's it. Moreover Milwaukee is completely Chinese owned with 99.8 percent of their power tools made in China. The only thing American about Milwaukee any longer is the name and some disposables. Squares, some bits.. Power tools? Nope! While DeWalt does not make every power tool (cordless or corded here) they make a decent amount and trying to add all the time. If Country of Origin isn't important to you so be it. I own a shop and it's extremely important to us. Matter of fact 98 percent of our tools are either USA or Germany (Knipex).

@mtanyctrainatlantamartatra7164 2 года назад

Cool powerful grinders, I'm happy with my kabolt cordless grinder I have for five years, still strong.

@jordanalexander615 Год назад

I use mine with the 8 amp high output battery. It lasts forever and sure it's rpm is slower but the torque is great. Just keep going and going.

@jordanalexander615 2 года назад

Just be careful in a dusty environment the DeWalt air inlets get clogged fast and let's some inside. Had to vacuum mine out a few times.

@treebossmike8818 5 лет назад

Would love to see part 2 brotha! I just bought the Flexvolt Grinder myself. I have Milwaukee’s Gen 1 Fuel and it’s awesome for smaller tasks. I went with the Dewalt because of the power. It doesn’t surprise me all the non-high output batteries over heated on you. I think that’s why Milwaukee introduced the High Output batteries to begin with, because their standard XC packs can’t take the draw tools like angle grinders need in order to perform. Great video brotha look forward to seeing part 2!

@philipjohn4149 2 года назад

I got news for ya. The HO batteries for m18 trip out also on some big tools. They get damaged a bit to easy too.