💦INSTALLING NEW HOSE BIB💦  

It is so satisfying to see professional work done. Very nice job 👏

Since everyone is criticizing the man let me add one more. The should of been a mounting block installed right there. Screwing directly to the siding can cause it to buckle in the future.

It makes the job so much easy if you have all the right tools.

Painter/home-owner is going to appreciate all the silicone rubbed a fingers width all the way around.

so satisfying to see a professional drill a hole on an angle in the wrong direction for proper drainage of the tube

When u install a nonfreeze out side Tap make sure u slope it towards the outside or it will freeze and split inside the house, it won't leak until u turn it on in the spring because the rubber in the nonfreeze is inside the house❤

Professional Plumbers always make things look so easy. Bravo

For colder climates where water freezes, one must remember to incline down spout towards the outside.

You did good as long as you're 😉 not in freezing climates.

I've always had great respect for the plumbing profession.

Love the tools 😎

когда есть необходимый инструмент -это все здорово, красиво, и быстро)

Always love the uncoated drywall screw

Is the frostless angled to drain out? It appears to be tilted backward.

Such an art. Thank you for your service!!

Serviço profissional, parabéns.

I like to crimp my pex on my hose bib before sending it through the sill plate. Less fuss in tight spots.

It's more like the whole house needs new plumbing

You forgot the shut-off valve

They always make it look easy, then I try and end up turning it into a project

What about that main valve 🤷🏻‍♂️

So glad I did my house in all copper 14 years ago. I listen to my friends with houses leaking around 5 years after the plumber leaves. I think it's hilarious. The reason I talk to tradesmen in the driveway before they enter my house is so I can peek inside their truck and see their mind. Have turn away many contractors over the years. Not a single regret. Or service visit

Man that is some fancy dancy toobin cutters you got thair...

Os caras têm ferramentas específicas pra tudo! Chega a dar inveja porque isso facilidade demais o trabalho e aqui a gente sofre. Eles têm ferramentas que a gente nem sabe que existe

Nice job! As a realtor, I usually see the vinyl “buckled” around hose bibs.

The only thing I'm thinking is spiders, lots and lots of spiders.

Isso é a prova, que com as ferramentas certas, podemos facilitar em 100% a mão de obra

I use to do plumbing with flare tools, solder, and a torch.

Вариант сильно южный. В средней полосе зимой разорвёт морозом.

Hey brother, nice job, quick and clean. I typically will clean the pipe before I cut it because it is more rigid while sanding and then mark if needed. I prefer emery-cloth over sand cloth due to strength and durability. A quick tip that helps me is that I tear a1 foot long piece of emery-cloth in half, (so it’ll be about 1/2” & so it forms easily around the pipe circumference) then wrap it 360 degrees around the pipe then pull both ends back and forth. Helps in tight spaces where I can’t see the backside clearly. Maybe you’ve already tried that one. I apologize for this being so wordy. A picture truly is worth 1000 words. Does that Milwaukee cutter leave much of an outside burr?

Ferramentas adequadas e um bom profissional combina perfeitamente!

My god. At that speed he must be able to do like a hundred jobs a day!

This guy makes it look easy. Love when pros know how to use their tools

Leave the man alone, he tried his best.

Nice toys to make quick work of it😊

Que show de trabalho, top👍🏻👍🏻👍🏻

Bob should be sloped down to the out side so as to drain when shut off.

Einfach wunderbar und schnell! Bei mir in Deutschland geht das leider nicht so einfach: 1) offiziellen Handwerker finden, der diesen Hahn mit Wasserzähler für Gartenwasser anschließt. 2) Antrag bei der Stadtverwaltung / Rathaus stellen, auf Gartenwasser und dabei Zählernummer des neuen Wasserzählers angeben. Rechnung und Bilder des Wasseranschlusses anhängen. 3) Nach Genehmigung des Antrages, den örtlichen Wasserversorger kontaktieren und Termin vereinbaren zum Verplomben der Wasseruhr, welche nun 5 Jahre genutzt werden darf. Dann muss diese wieder getauscht werden, da die Gültigkeit dann abläuft. Wahrscheinlich dann wieder mit Antrag für das Gartenwasser. Damit zahle ich dann keine Abwassergebühr auf das entnommene Gartenwasser. Sonst könnte ich das Wasser ja weiterhin mit Schlauch von innen nach außen legen, wie wir es schon seit Jahren machen. In Deutschland ist alles verboten was nicht ausdrücklich genehmigt und erlaubt ist... Und wehe du baust schwarz und das kommt raus! Dann droht Strafe und / oder Rückbau / Abriss des Gebauten. Mit unserem Denkmal geschützen 200 Jahre alten Haus ist alles bauen nochmal schwieriger und nur mit Abstimmung der Denkmalbehörde möglich. Beschießen hier! Liebe Grüße über den Teich ;) Linett

У нас сантехник собрал такой же из полипропиленовых фитингов и трубы. Без всяких приблуд)

My old my said ,it's about being professional but be confident about your work ❤🙌

I love how your frost free hydrant is sloping into the house. Fail

You get all the fun jobs!!!

tools makes work a lot easy specially in tight areas. excellent idea

I ain't a plumber. No shut off valve for the spigot? No downward slope for winterizing? Don't rodents like plastic(pex) in crawl spaces/basements?

If you don't put a grade towards the outside, water will freeze and break the valve. Note for future reference.

Easy great job

Trabalhei nos EUA ! Foi muito bom !! Dinheiro , ferramentas , etc I work in the USA !!! Tool amaizing , maney , very good!!!

You forgot to add valve for servicing

That vinyl siding doesn't like to be held so tightly. I think they sell a part for sillcocks.

That's a good work

Perfect tools and So professionally done 🙌🏻👍

It's easier to clean the pipe before you cut it

With modern tools, these jobs are getting better & faster

All the best cool tools

Holy shit that crawlspace is tall😭

Good shit bro

You make it look so quick and easy that the homeowner will want it all done for 20 dollars

Things seems so easy when done by a professional but almost impossible by ordinary guys like me.😂

Ah yes, the all season exterior drywall screws. Those should last till, oh next spring at least....😂

That’s hose bib needs to have a little bit of fall so the water can drain after the valve body. If installed in a part of the country that experiences freezing temperatures you will no doubt be back to fix your mistake

Good tools make job easy

Tools are the absolute best… And you have the best tools. Good on ya, brah 🤙

How do we seal the gap between the pipe and the wall? Foam?

I know nothin about plumbing but that looked like a real good job. Unrushed and properly done. Also was very satisfying to watch lol

*Ferramenta 🛠 é Tudo!!*

I love tools! 😊

No isolation valve?

You missed a step. Every rafter needs a hanger.

Really good work i learned alot from you youtube plumbers

no soldering of copper pipes anymore ?

You don’t use copper or brass on steel pipe it causes you steel pipe to corrode faster

Love the Froth-Pak in the rim joist. Good vid thx

Beau travail mec! Bravo.

Good job but much easier to Clean the pipe before it is cut.

3 out of 10 : No tilt for the hole, no backfilled insulation

Nice to see you brought out the sandpaper.

Amazing tools

$6000 dollars worth of tools and no caulking gun...plumbers!

And that's what you call slapping a house together.

Muy buen trabajo, fantástico 🎉

I like how pex has changed plumbing so much for the better

Guaranteed leak......

Americans build houses like we would build like a shed for garden equipment DIY

I ❤ the yanks they have every tool going 😅😅😅❤❤❤

Skylar, we have rot all over the floor💀

Nice tools.

Wise men nor fools can work without tools. Nice job !

Very good! 👍😄

Made that look so easy. Good job sir!

Those tools really made those work perfectly done,

Sou mais o sistema hidráulico, aqui do Brasil 👏🇧🇷👏🇧🇷👏

Dang, that sure looks easy!! Awesome job!

Zabardast kam .good job

A true professional 👏

Awesome 👍😎

Awesome!

الله يبارك خدمه ما شاء الله 👍

I think cleaning the pipe before you cut helps your cutters last longer, honestly cuts easier too

Estas si son buenas herramientas para trabajar en cualquier lugar de donde tengas que ir a trabajar 👍👍

Just a perfect job