🔋 How To Charge Motorcycle Battery Without Charger or CAR at HOME ⚡ 

One needs to understand the basics of electricity, just cause that battery does not blow up, doesn't mean your theory is all valid. Increased voltage heats up the plates inside, boils the liquid, and reduces its life. I agree, fancy chargers does all this automatically for you and I so far did not have a single battery charger fail on me. 12v battery can take up to 14.4V, depends on number of cells in the battery and give it the max current. the battery will decide how much current it needs, based on the total plates resistance - A simple Ohms law. To re-vitalize the battery, set the voltage to 0 and current to max, then start increasing the voltage until you want the battery to see taking in certain amount of current. It all depends on the resistance at the terminals that the bench power supply is seeing - Cheers!.

thank you. this is the only video online concerning Bench power supply trickle charging. thumbs up

If you connect the clips of the power supply together the display will show the amps and you can set the amp limit (CC) to 1.2

Bro keep walking back and forth in the beginning and im to high for this lmfao

I have a 30v 2A BENCH POWER SUPPLY ... WHAT VOLTAGE AND AMP IS BEST FOR A 12V 8AH BATTERY ( lead acid ) ?? BTW IM CHARGING IT AT 12V 1A ..and it has gone from 11.3v to 12.02v in 1 hour

I did this yesterday because I was in a bind and my truck battery was dead. I ran the power supply at 14V, the amps fluctuated between 7-10. I’m no electrical engineer but this seemed kind of dangerous to me. After about 7 minutes, there was enough charge in battery to start the truck.

Lol I lent someone my battery charger, so I went into the lab, and grabbed my bench power supply to do the same thing 😂 nice video

My bench power supply has max output volts to 17V And 2A Im trying to charge a 12V car batt lead acid When i connect the psu to batt the psu drops to 11.5 V??? And fluctuating (11.1V-12v) And amp fluctuate (0.00 to 2.99) What is wrong here?

You will never charge a 12 V battery putting 12 V in ! 13.2 volts or higher, is a maintenance charge that can be left connect continuously, at low current level. A healthy battery will read 12.6 V or higher

which suzuki bike is that ?? looks sexy and bassy