🔥 Amazing cutting absolutely perfect circle with the jigsaw

Подписаться 195 тыс.

Просмотров 187 тыс.

50% 1

Yes, it is possible to cut a perfect circle, with perfect vertical cut, using my circle cutting jig for jigsaw. No need to drill a hole to insert the jigsaw blade, so there are no marks in the edge of the wooden circle, and the edge is also perfect, with a perfect vertical cut, because I my guide with bearings keeps perfectly vertical and straight the jigsaw blade, so the blade cannot bend. So, if you look for how to cut perfect circles in wood using a jigsaw, this woodworking technique and this circle cutting jig for jigsaw can be of your interest.
This is my amazing technique for circle cutting with a jigsaw jig:
• Amazing Technique for ...
This is my new versión of this jigsaw circle jig. It can be adjusted to cut any wood circle to the desired radius (video with no voice-over):
• It works! Adjustable J... You can watch it in my new channel "DIY and wood".
Here you can watch how to make the guide with bearings to keep perfectly vertical the jigsaw blade:
• 🔥 PORTABLE jigsaw JIG ...
And here the same amazing woodworking jig, but to make perfect 45 degrees miter vertical cuts with the jigsaw:
• 🔥 Amazing JIGSAW JIG f...
More woodworking projects in my channel and in my woodworking blog: enredandonogar...

Опубликовано:

10 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 76

@SMee67 4 года назад

Nicely done mate, and a great quality cut on that circle! 👍🏾 I think the problem with the blade bogging down and getting blunt so quickly is because the blade runs in an up and down motion, and the bottom of the jig where the bearings are stop the sawdust from falling out and jams up in the cut, maybe if you continuously run the jigsaw backwards every 5 seconds or so, letting the sawdust escape you might find it may cut better? I'd be interested in finding out if this makes a difference.

@WoodworkingwithDIYtools 4 года назад

Thank you very much Bill 😀. Cutting this hardwood makes a loooot of very fine sawdust. It accumulates a lot under the metallic shoe of the jigsaw. Also the bearings are very near the bottom of this thick oak board. And I think I should use a jigsaw with some more power than this one. The result is there is too much overheating everywhere. I tried to give some rest to the jigsaw from time to time, but it looks it was not enough. But anyway, I am very happy that I could make so very nice circle cut with the jigsaw in this thick oak board 😀😀😀

@_J.F_ 4 года назад

That is a very nice jig you have made allowing anyone with just a jigsaw to make some easy wooden circles.

@wayneclark3641 11 месяцев назад

Brilliant - Really Helpfull and easy to follow Videos - Thank You So Much!!!

@JoshWrightWoodworking 4 года назад

Great idea. Simple to make and effective. Thanks for sharing.

@donaldadams1644 2 года назад

I liked your first model for cutting the circles but I love this one with its great cut. I will have to go out & buy a couple of bearings & make up a jig like this one. Very clever work, thanks for sharing. Don from South Aust.

@PedroUR 4 года назад

Excellent video. Instead of "take away the screw", (quitar el tornillo), English speakers usually say ""remove the screw".

@IsaKocoglu 4 года назад

Ingenious! Thank you for sharing your secrets 🥰👍

@MadMansCosplay 4 года назад

This video came to me exactly at the right moment! Thank you so much!

@jimgardiner3476 4 года назад

Perfect, thank you.

@BrattonBuilt 2 года назад

Great video. I tried cutting a circle with a jig saw in plywood and it was perfect and simple. But cutting hardwood is another story the blade didn't stay in place. You have a great solution here if it's gotta be done with a jig saw.

@Josh_Luijsterburg 4 года назад

lo diseñaste muy inteligentemente. artesanía. sigue así y mantente saludable y seguro

@mrnobelnigel 4 года назад

Excellent ideas. Great solution for circle cutting 👍👍

@hallerockcliffe8962 4 года назад

Brilliant video, thank you so much...... just what I needed to cut runners for my chair. Thanks so much again,God bless,H.

@tonyholt90 4 года назад

Love the jig you made, clever idea thanks for sharing 👍

@colincooper2360 4 года назад

I subscribed to your channel a long time ago and have admired your "vids" ever since ,i wish you were my neighbour i admire all you do.

@donaldwhite7536 3 года назад

Wow! Very impressive woodworking and video skills. Great, simple (and inexpensive!) method for a difficult woodworking project. You are an inspiration for us garage woodworkers everywhere. Thanks so much!!

@WoodworkingwithDIYtools 3 года назад

Thank you very much Donald 😀. The jigsaw is a great woodworking tool, but sometimes it needs some help to make perfect cuts in wood 😀

@mikeallan9574 4 года назад

Brilliant idea, and very well executed.

@sajidmah62 4 года назад

Wow perfect

@lokitus242 4 года назад

you are genius !

@markduggan3451 4 года назад

That is a really good idea, you could make a lovely table out of that.

@khalilaljamaan7197 4 года назад

I like your way of work and explain. 👍🌷

@rodneicordeiro2205 4 года назад

Parabéns, muito bom, ótima ideia e belo jig

@WoodworkingwithDIYtools 4 года назад

Muito obrigado 😀

@Jako-fh8zg 4 года назад

Nice job, definitely on my to do list now, thanks for the idea 😀👍

@lokitus242 4 года назад

very clean job !

@abstractgamer8543 4 года назад

Very nice you could build an entire table using the outer cut off pieces as legs. S̷̛̤̟̯̞̍̑̍͒̕ù̸̡̡̱̣̯͇͓͙̦̞͛̋̊̄̈́̄̿́b̸̨̻̟̪̥̜̭̞͐͊̑̚s̷̡̬̤͎̭̑̔̅̑̏́̉ͅc̴͇͚̋͋͠r̷͇̞̰̫͖̀̑̀̆̚i̸̖̤̜̞͉̲͓̖̖̹̍̽̚b̶̧͖̬͕̭̜̼͔̪̺̅̏͋̉̀ḗ̵͕͑̋d̴͚͖̂

@alunmorgan7869 4 года назад

Good idea

@Mr_Rick 4 года назад

Good work. Very creative.

@buzzgallagher 4 года назад

Subcribed for a long time now. Enjoy watching your ideas....

@crazy_dreamer7616 4 года назад

Great jig, great work. Thank you for sharing! Greetings, Robert

@itamarcarrijo 4 года назад

Congrats. Excellent, as aways. Thanks for sharing.

@WoodworkingwithDIYtools 4 года назад

Thank you very much 😀. Thanks for watching

@FranksDIY 4 года назад

Not bad for a jigsaw.

@WoodworkingwithDIYtools 4 года назад

hahahahaha, not bad ... but, amazing for a jigsaw? 😀😀

@mrupholsteryman 4 года назад

Curious....maybe you know.. Do router bits come in this long of a length? And if so? Is it cost prohibitive? I know the blade of a jigsaw is skinnier and will be less dust...but was curious about the length of router bits. Cool jig though! 😇😎

@FranksDIY 4 года назад

@@mrupholsteryman Yes they do at a bit more costly than a jigsaw blade but more accurate. If you don't have one this is the way to go.

@marcosantoniovolpato988 4 года назад

MARAVILHA

@WoodworkingwithDIYtools 4 года назад

Obrigado 😀

@Kevinrichardsonministries 4 года назад

Good Job !! Thumbs Up !!

@WoodworkingwithDIYtools 4 года назад

Thank you very much 😀

@hassanal-mosawi6049 4 года назад

well done!

@WoodworkingwithDIYtools 4 года назад

Thank you Hassan 😀

@terjegrov899 4 года назад

Very Nice device U made.

@WoodworkingwithDIYtools 4 года назад

Thank you very much 😀. I think I will use this jigsaw jig a lot

@joshallen4891 4 года назад

I wonder if this can be done with a reciprocating saw with a bigger jig and floor roller..a whole table built just for it if you do alot odf thick round table cuts..also some king of center radius pin or pole even if you have to fill it in later with wood filler

@WoodenItBeNice 4 года назад

Hi Sergio, That is a fantastic jig. I have a bandsaw with a circle cutting jig for cutting circles otherwise I would build one of these. Take care. Cheers, Huw

@WoodworkingwithDIYtools 4 года назад

Thank you 😀. Sure one day I will buy or make a band saw

@SkyForgeVideos 4 года назад

I need this...

@squaredcircle8768 Год назад

Hi. Do you know why my jigsaw is cutting slanted when I cut a circle?

@FABIOATWORK 4 года назад

Ingegnoso e favoloso comlimenti

@dr.blackysenior8615 4 года назад

Very nice way to cut circles with jig saw. I did not understand why you had to screw the jig in 2 places of the work piece. Would one screw in the Center of the needed circle enough to get a perfect circle?

@michalsalter-duke4028 4 года назад

The first one is for cutting in from the edge to the right place. Although there could probably be a different way to do it with only one screw. Maybe free hand cut to the right spot? But his way made a really clean line where the actual circle started, so other ways might not work so well.

@Pete.Ty1 4 года назад

😊👍

@billf7062 3 года назад

Result is excellent. How long is the blade?

@MultiTom1956 4 года назад

Very nice !! Where do you get this extra long blades?

@sajidrafique375 3 года назад

Lovely ...Now modify with an option to cut perfect elliptical board and post a video

@WoodworkingwithDIYtools 3 года назад

hahahahaha, yes, that was also in my mind 👍😁. But first I will cut a perfect bevel using the jigsaw 😁

@billbyrd9845 4 года назад

Great idea with the bearings. What part of the world are you in?

@abeque64 4 года назад

Bill Byrd Galicia. Northwest of Spain.

@briandmello1981 4 года назад

What tpi blade to use for this?

@lokitus242 4 года назад

it's possible to cut in 45° angle to make bowls ?

@ParaBellum2024 4 года назад

That would be good if you could make it work. Similar to what you can do with a scroll saw. It should be straightforward to cut the outer circle, but you'd need 45 degree pilot holes for the inner circles, big enough for a jigsaw blade.

@jamescampbell7780 4 года назад

What do you do to disguise the screw hole?

@ParaBellum2024 4 года назад

Put the screws in the underside or reverse of whatever you're making.

@CHRlSTlAN 4 года назад

Great Idea. But you can use Festool, Dewalt, Milwaukee blades in this Bosch Jigsaw.

@SuperChrisgaffney 4 года назад

Clever how the jig saw blade is kept square....pity it a crap jig saw my baby sister has one of those .....but good work mate

@michaelhankison3996 4 года назад

Or you could just use a router

@deanwhiteside6339 4 года назад

a clean cut with all screw holes on surface of wood 👎

@TheOnlyHalfline 4 года назад

why are tiny pin holes a problem? could be filled with sawdust and glue afterward and completely disappear. and often the center hole will be needed for "step 2" of construction anyway.