🔥 How to REFORM a STORAGE ROOM with PLASTER PANELS 🤜
• 🔥 Cómo Hacer REFORMA d...
In this video you will see how to mount a drywall partition for a bathroom.
We will mount the ceiling in such a way that we are going to leave a space for storage.
✅ Link to the product:
www.huepar.com/products/huepa...
🌕 Amazon link: amzn.to/3EghVgO
About this product
BLUETOOTH TECHNOLOGY AND HIGH VISIBILITY: Bluetooth connectivity allows you to control the ON/OFF pulse mode and select the laser planes with the Huepar app or the remote control. This self-leveling laser level adopted Osram's bright green laser unit, which is resistant to temperature changes and has higher stability. The green beam is twice as bright as the red laser with a working range of up to 40m accuracy within ±3mm at 10m.
LARGE CAPACITY LITHIUM-ION BATTERY AND TYPE-C PORT: Huepar P03CG laser level adopted 10.8V/2600mAh lithium-ion battery and provides 10 hours working time. The lithium-ion battery can be charged separately, and the four battery power indicators let users know the charging status. The lithium-ion battery pack can be quickly released and installed for easy use.
3x360° FULL DESIGN LASER TOOL - Huepar laser level has 360° horizontal plane, 360° two vertical planes, 12 laser lines, which can cover the floor, walls and ceiling around the room. Each button on this laser level corresponds to a single laser line, you can easily choose to turn on/off any laser line. Unlock the pendulum, the laser level will self-level within 4°.
MAGNETIC STAND AND MOUNTING THREADS: This green line laser offers 1/4"-20 and 5/8"-11 mounting threads for attaching to a tripod or magnetic mount. The strong magnetic mount allows for quick positioning on metal surfaces, helping to hang the laser level for wall applications and can be rotated to the required angle. The magnetic base also has 1/4"-20 and 5/8"-11 mounting threads to accommodate various tripod threads.
WATERPROOF : IP54 waterproof design protects the unit from splashing water, dust and construction debris. The kit has a hard case for convenient transport and storage of the laser tool.
Video transcript:
very good
In today's video we will mount a partition for a bathroom with a roof to be able to store on top.
We mark the measures that we want to give to the bathroom.
Many thanks to the Huepar brand for sending me this laser.
In the description you can find the link to the product.
We will place the laser so that it will mark us a perfect square to mount the partitions.
We measure and cut the channel.
We measure the door gap and fix the channel.
We put a stud in the back and front.
We cut a channel to place on top.
For the front wall, we will cut the studs to a height of 215 cm.
We measure a channel and cut it. This will make the side wall stay fixed.
We cut the studs along the laser line and place them.
We set them every 40cm.
For the ceiling, we set a channel along the laser line.
We cut some studs.
We fit one inside the other for extra strength.
You have to pay attention, since they only fit in one position.
We place them every 40 cm, since we will use it for storage on top.
We put insulation and put the drywall above the ceiling.
We place the panel on top of the studs, with the good side facing down.
Now we put the drywall on the outside.
Ready the partition to pass the plumbing and electricity.
I ask you with this stream of voice to subscribe to my channel. Thank you very much.
Thanks to the Huepar brand for sending me the Laser so kindly.
It is perfect to have at home, since it has several options.
Remember that in the information box I leave you the link and a description of the product.
If you liked this video, don't forget to click LIKE and share it with your friends.
Do you want to know every time I upload a new video of crafts, tricks, decoration ideas, inventions and some other interesting and fun things? So don't forget to subscribe to my channel :-D
3 окт 2022
