No video :(

🗞️ The LaserMATIC MK2 Chuck Roller - FULL setup and first run!

Подписаться 81 тыс.

Просмотров 8 тыс.

50% 1

➡️ Click on ...more↙️for the VIDEO MENTIONS and other Links!
➡️ The LaserMATIC 10, 20 & 30W: King of the Diode Lasers!
🔗 rolyautomation...
The LaserMATIC 10, 20 & 30 are now IN STOCK!
The Roly Automation Support Facebook Group:
/ rolyofficial
=======================================
Shop my Amazon Store for focused laser products!
www.amazon.com...
Remember! Anything you buy on Amazon after following this link supports the channel and doesn't cost you a penny more!
=======================================
🏆Become a Patreon Supporter for insider benefits and downloads!🏆
Patreon supporters get 80-100% OFF in my graphics store!
engraveandcutf...
/ lahobbyguy
=======================================
➡️ My hobby Forums: lahobbyguy.com/bb
Facebook: / lahobbyguy
Facebook Group: / lightburnsoftware
Check me out on Rumble! rumble.com/c/c...
=======================================
👉EXCLUSIVE $200 Discount Coupon on the Gweike Cloud Co2 Lasers!👈
If you're looking for a Co2 laser, use my exclusive discount code!
This code is good on all laser website purchases at www.gweikeclou...
➡️ Coupon Code: LAHOBBYGUY
(Coupon code not valid on pre-orders of new products)
➡️ 8 Neodymium Magnet - World’s Strongest Rare Earth Magnets - $13.99
lahobbyguy.com...
➡️ 4 Physical bed Material Standoffs - $17.99
(ALWAYS LIMITED STOCK)
lahobbyguy.com...
➡️ 3D Print Honeycomb bed air gap Standoff STL File
lahobbyguy.com...
➡️ 12” x 12” x 1/8” Premium Baltic Birch Plywood A/A Grade (Box of 45) - $69.99
(Other Sizes Available)
amzn.to/3KCDWIU
=======================================
If you appreciate my tutorial videos and template downloads and want to buy me a cup of coffee, or a beer to help support the effort, but don't want to sign up as a Patreon, I would greatly appreciate it!
🔗 PayPal link: paypal.me/laho...
=======================================
Need to mail me something?
The Louisiana Hobby Guy LLC
4945 Grand Terre Drive
Marrero, LA 70072-6613
Lightburn Software - Try Before You Buy!
🔗 lahobbyguy.com...
Lightburn printable shortcuts guide:
🔗 lahobbyguy.com...
=======================================
Most of these links in the description here are affiliate links but will NOT cost you a penny more! In fact, most of them will be bargain priced, since I shop for the best value!
=======================================
➡️ Pre-Cut Leather - 3" x 48" - 1 Strip - $16.95
amzn.to/3OCSdGE
➡️ The Walnut Road Collection of high grade USA grown and CNC'd hardwood coasters:
www.walnutroad...
info@walnutroadwood.com
➡️ Use Coupon Code HOBBYGUY for a 25% discount!!
➡️ Ocooch Hardwoods:
ocoochhardwood...
🆕 The NEW ORTUR CHUCK ROLLER! No Assembly Required! $179.99!
s.zbanx.com/r/...
Ortur Laser Master 2 Metal Enclosure, for LU1-2, LU1-3, LU1-4, LU2-4, OLM2-S2-SF:
amzn.to/3fg0qPX
The CORRECT glasses for my diode laser!
amzn.to/33QQHNU
CHEAP and effective transfer/mask tape
amzn.to/3HVzGR6
Stainless scissor platform for height adjustment of my bed
Several sizes to choose from
amzn.to/2QVUSSa
Steel bed for my other laser:
amzn.to/3BVoBgb
"Punk Spikes" for the steel bed:
amzn.to/3mAMBjV
LED light bases - 2-pack - CHEAP and nice!
amzn.to/3yEdPK5
Pre-cut Acrylic for LED light bases
amzn.to/3HTJHhx
10-pack of Acrylic, 5x7 clear
Several sizes to choose from
amzn.to/3JXqmhk
60 Pack of thin wood rounds
amzn.to/3oTRwvA
Slate coasters with a stand
amzn.to/3qfIiMk
#LaserMATIC #Roly Lasermatic #lightburn #tutorial

Опубликовано:

5 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 99

@charleslamont2963 9 месяцев назад

Your teaching style and demeanor set the standard. Would love to have a Lasermatic, and any of your teaching is the best.

@TheLouisianaHobbyGuy 9 месяцев назад

Wow, thank you Charles!

@Joe135Boomer 3 месяца назад

Once again your teachings are so easy to follow. Just got my Lasermatic 30w with rotary set up. Have enjoyed playing with it the last few days running power test, but now it is time to do some real work. Will be trying my first tumblers for Father’s Day. If I follow you instructions it should work out without any trouble. Thanks again. Will post my results on the forum.

@TheLouisianaHobbyGuy 3 месяца назад

Great to hear Joe!

@smokingcrab2290 4 месяца назад

When I saw this dude lookin like the guy in every science fiction movie who's in charge of inventing every latest and greatest device.. I knew I found the right guy..

@TheLouisianaHobbyGuy 4 месяца назад

🤪 Thanks for watching!

@BobBell-lk6hs 13 дней назад

Hey Rich. Thanks so much for all you do!!! I have learned and still learn so much from you. In this video were you using the 10 watt or a higher wattage.

@TheLouisianaHobbyGuy 13 дней назад

I was using the 10/30W Bob.

@bigdawg5135 9 месяцев назад

Dang, I recall learning from you with the otur rotary. What a difference. Amazing how far things have come in such a short time.

@TheLouisianaHobbyGuy 9 месяцев назад

Yes it is!!

@randyday3278 9 месяцев назад

Ordered the 30w package on Friday. Can't wait. Good video Rich thanks

@TheLouisianaHobbyGuy 9 месяцев назад

Hope you enjoy it Randy!

@Jay.C.H 7 месяцев назад

I originally thought about getting the WeCreat laser, because of a couple of features I liked. BUT!!! After watching the videos on the lasermatic MK2 no with a 30w laser it has become a no-brainer. Another thing that is a big deal is support. There are so many resources to draw from. Now all I have to do is come up with the $. The amazing thing is that all this quality doesn’t require a wheelbarrow of money. Thanks for all your input, Another convert

@TheLouisianaHobbyGuy 7 месяцев назад

Yeah, the LaserMATIC is head and shoulders above any diode on the market.

@Sergiodj453 9 месяцев назад

Just got the 30 watt MK2 your videos are so helpful especially this one since it’s the first time I’m using the chuck rotary.

@TheLouisianaHobbyGuy 9 месяцев назад

Glad I could help Sergio!

@user-qk2uk9nr6y 9 месяцев назад

Just got my rotary and switched out the module to the 10/20 watt. This video was so helpful !

@TheLouisianaHobbyGuy 9 месяцев назад

Great to hear it!

@MikeVanWhalen 8 часов назад

Hi Rich, is there anywhere I can find a video on doing a full wrap on the same style cup or the size a little smaller than this one? Only videos I've been able to find are for different shaped tumblers. Love all your videos, been a huge help in advancing my skills.

@herbbrowning3823 8 месяцев назад

Hi Steve, tomorrow will be my first time. Waiting for delivery😊 Thank You!

@TheLouisianaHobbyGuy 8 месяцев назад

The name's Rich 🤪

@herbbrowning3823 8 месяцев назад

@@TheLouisianaHobbyGuy Sorry Rich, have to play the I'm getting old card!

@jeffreibling4074 9 месяцев назад

Greg video, you answered the question I was going to ask about taller jobs. My 30 watt Roly is supposed to be here Tuesday. I too have a set of the fancy risers like you, mine are scrap oak pallet wood, can’t beat free.

@TheLouisianaHobbyGuy 9 месяцев назад

Awesome Jeff! I actually have 3D printed legs now.

@jeffreibling4074 9 месяцев назад

Great video, not Greg. Lol

@terryclair2914 9 месяцев назад

Rich thanks for the video they are always great. I purchased this chuck rotary for the original Lasermatic 10 and the setup is different for that machine. Also the cables between the roller and chuck rotarys are different for some reason. The manual for the chuck rotary stipulates that "Either objects diameter or circumference needs to be set by the user." Also "MM per rotation" needs to be set if you were using the roller rotary as you don't input machine definitions for the Lasermatic Mk2 when using it with the Lasermatic 10. One last issue I have with chuck rotarys is that if you are using chuck jaws that fit internal to the object there is no good way to get easy repeatable placement. Just my observations.

@TheLouisianaHobbyGuy 9 месяцев назад

This video was on the Mark 2 Terry. Yes, basic settings need to be set on the 1st edition.

@merrillalbury8214 9 месяцев назад

Ordered my rotary for my original Lasermatic last night.

@TheLouisianaHobbyGuy 9 месяцев назад

Awesome Carl!

@user-wn7xm4qd8i 9 месяцев назад

love your videos you need to make a video on how to use the pass though on the lasermatic

@TheLouisianaHobbyGuy 9 месяцев назад

I am... it's pretty simple. Just remove the passthrough covers.

@sicciful 9 месяцев назад

thanks rich for this informative video

@TheLouisianaHobbyGuy 9 месяцев назад

Thanks so much!

@frankalviso3147 3 месяца назад

So I didn't see you compensate for the curve of the cup to the image or is the roly doing the work for us. I have mk 10 and have even opened the rotary tool. I've been to busy with wood projects. But 30wt xy is come soon and would like to use the Chuck in some stanley cups.

@TheLouisianaHobbyGuy 3 месяца назад

This file didn't need any compensation Frank. The 30W XW will be here next week, so stay tuned!

@tamidity 7 месяцев назад

Can you do a video showing how to do the really large tumblers or even jugs (like a 64oz beer growler if thats even possible)?

@TheLouisianaHobbyGuy 7 месяцев назад

Eventually...

@XS-Robert 9 месяцев назад

This really is a great laser with great functions and accessories. Unfortunately, it can only be ordered from the USA. I would like to have such a device but I live in Germany ;-) Nevertheless, I enjoy watching your videos, I've already learned a lot from them and I'm still learning. Many thanks for that Greetings Robert

@TheLouisianaHobbyGuy 9 месяцев назад

You can order it in Germany Robert. It just costs a bit more for the tariffs and import fees. Contact leo@rolyautomation.com and tell him I sent you.

@XS-Robert 9 месяцев назад

@@TheLouisianaHobbyGuy Thanks for the information, I have just written to Leo. (hope it is not too heavy with the fees ;-) )

@TheLouisianaHobbyGuy 9 месяцев назад

It's not the shipping fees, it's the tariffs and import fees charged by your country.

@XS-Robert 9 месяцев назад

Yes, that is what I mean

@Grandpa_LBM 9 месяцев назад

good and informative, thanks for sharing

@TheLouisianaHobbyGuy 9 месяцев назад

Thanks for watching!

@KevinHawbecker-wr3ll 9 месяцев назад

Thanks!

@TheLouisianaHobbyGuy 9 месяцев назад

You bet! Thanks so much for the support!

@Mikoleungcy 9 месяцев назад

great video!🎉

@TheLouisianaHobbyGuy 9 месяцев назад

Glad you liked it!!

@atbien21 9 месяцев назад

Thank you so much!

@TheLouisianaHobbyGuy 9 месяцев назад

My pleasure!

@btigenie 4 месяца назад

Just ordered my new mk2 with the 30w module. Is your file for the machine settings the file that comes with the unit? Is that for 10w or 30w? Every time I want to try something with my lasers, your channel is the first place I go to look to see how you already did it! Thank You!

@TheLouisianaHobbyGuy 4 месяца назад

The file I made was for the 10W. You can get the 20W in their Facebook group.

@btigenie 4 месяца назад

@@TheLouisianaHobbyGuy Is there a 30w available?

@TheLouisianaHobbyGuy 4 месяца назад

Soon...

@LouRao 3 месяца назад

In section 16:10 you mention doing this cup engraving on another laser didn’t do a good job, which laser was it? thank you

@TheLouisianaHobbyGuy 3 месяца назад

I don't remember Lou, it was 6 months ago.

@nickbayliss9110 9 месяцев назад

Hi Rich great video. I am just waiting for the postman to deliver mine today. Will I need to alter any settings as I have the Lasermatic 10.

@TheLouisianaHobbyGuy 9 месяцев назад

The roller should come with a USB to install the chuck settings. If not, you can ask for them in the FB group Nick.

@mikeguidry49 9 месяцев назад

Thanks Rich, great job as always. Did you have it set to 10w or 20 w, sorry if I missed that. Thanks,Mike

@TheLouisianaHobbyGuy 9 месяцев назад

The switch was already in the 20W position Mike.

@philbo9k 4 месяца назад

Hey LHG, do you know if this can do 40oz stanley tumblers?

@TheLouisianaHobbyGuy 4 месяца назад

It can Phil, after removing the baseplate and flipping over the rotary.

@Andy.H.H. 9 месяцев назад

Great video Rich. Can I ask, why is it okay to turn the rotary by hand?

@TheLouisianaHobbyGuy 9 месяцев назад

It doesn't move far enough to send a charge back Andy.

@KRich408 6 месяцев назад

Question I have been having issues with my rotary tool, I contacted Roly they said what I found was correct but I'm really confused because when you use it you don't have the same issues? When I leave lightburn set to 96 mm per rotation the Z is way off a 2mm letter gets wrapped around the glass I have been testing on. I entered the correct measurement into the rotary settings. I'm worried that something could be wrong with the MK2 I just got. I had to change the 96 mm to 10 mm to get the rotary to stop spinning completely around stretching the image. Just to elaborate I followed your instructions to the T but getting bizarre results

@TheLouisianaHobbyGuy 6 месяцев назад

There is an employee technician on staff in the Facebook group: facebook.com/groups/rolyofficial No, I don't have that problem.

@jstet11 5 месяцев назад

What made you say it’s “running a little too hot”? I’m testing MK2 30/10w and getting black laser marks but they don’t rub off with water or isopropyl alcohol when I’m done (im getting a burnt dull look instead of the shine no matter how much a clean it after)

@TheLouisianaHobbyGuy 5 месяцев назад

I had the power set too high. Sounds like you do too.

@JumboShr1mp 20 дней назад

i got a problem. my distance box gray showing it not enable (showing gray text in box). I'm trying to fine the fix. also fire not working thou I set mine as you instructed us to do so.

@TheLouisianaHobbyGuy 20 дней назад

The distance box should never be grayed out. Try restarting your computer, and if that doesn't work, post the problem on Lightburn's forum to get an answer from a technician.

@JumboShr1mp 20 дней назад

@@TheLouisianaHobbyGuy thanks

@JumboShr1mp 20 дней назад

@@TheLouisianaHobbyGuy Here the fix My Continuous Jog was ON just turn it OFF. and your Distance will work!!!!!!!

@TheLouisianaHobbyGuy 19 дней назад

Oh, DUH, I didn't think of that... 🤪

@JumboShr1mp 18 дней назад

@@TheLouisianaHobbyGuy i found it right where you sent me lightburn support chat.

@stevespringer8385 9 месяцев назад

Hi Rich. Can the rotary be used without rotation? I have square, tapered cups to engrave and I'm thinking that putting them in the rotary and leveling, this would provide me with an accurate 'jig' to repeatedly orient each cup each time. thanks

@TheLouisianaHobbyGuy 9 месяцев назад

Sure Steve. The LaserMATIC uses the Z axis for the rotary, so if you don't plug it in and enable the rotary, the laser will work normally and you can use it as a jig.

@benjaminpastrana9662 Месяц назад

Does it have to be the roly rotary? I have the Xtool pro rotary, just wondering

@TheLouisianaHobbyGuy Месяц назад

Yes it does.

@jessetutterrow4320 9 месяцев назад

I own the original 10-watt unit. The alignment for the honeycomb grid and the roller is tied to the exact position of the bottom. From eMail w Leo it is my understanding that if removed there is no index / key to guarantee that the bottom will go back in the exact position it used to be in. Is this true? If so, how can I get that exact alignment back so the roller, rotary, and honeycomb grid will be in the correct position?

@TheLouisianaHobbyGuy 9 месяцев назад

The bottom is indexed on a 10mm lip and drops back into this shelf perfectly. The 6 screws holding the bottom into the shelf index perfectly.

@StumblingBumblingIdiot 9 месяцев назад

That chuck rotary looks sweet. I used the regular roller a few times now and it works great but this looks nicer because it grabs the piece to turn it. That 30w was flying pretty good too! I see that chuck rotary will work with my original 10W too, SWEET!

@TheLouisianaHobbyGuy 9 месяцев назад

Yes it will Mike!

@sharpharmade 9 месяцев назад

I'm trying to decide if I will keep the first one, the MK1; or upgrade to the MK2 (selling the MK1) ... also, Rich is the thumb drive that was sent for the MK1 still of any use for the MK2? TIA!

@TheLouisianaHobbyGuy 9 месяцев назад

No, the MK2 comes with its own USB drive and different settings.

@robertdehart7128 7 месяцев назад

Is there an extension cord for the rotary

@TheLouisianaHobbyGuy 6 месяцев назад

No that I know of, but Patrick at Lightsource Engraving makes them. sales@lightsource.pro

@shannonsadler7461 5 месяцев назад

Would this be able to do the 40oz stanley style tumblers?

@TheLouisianaHobbyGuy 5 месяцев назад

Yes, but you would need to raise the laser and remove the bottom plate.

@shannonsadler7461 5 месяцев назад

@@TheLouisianaHobbyGuy thank you

@blah_z 9 месяцев назад

Love to know if the jaws can be reversed so as to hold the cup on the inside?

@tonyrackliff2003 9 месяцев назад

Yes, sir, they do hold items from the outside

@TheLouisianaHobbyGuy 9 месяцев назад

Yes, and it comes with 2 different sizes.

@RussW51 9 месяцев назад

Rich, great video! I got the rotary going thanks to you, but I have lines in my graphics. Like not all the paint is removed. In other words, the graphics have lines of paint that did not get burned. What am I doing wrong. Something to do with dpi or overscan?

@TheLouisianaHobbyGuy 9 месяцев назад

Overscanning should be 3-5%. DPI should be 318. You can also raise the focus a mm or 2.

@user-wn7xm4qd8i 9 месяцев назад

What's the biggest tumbler you can engrave on the chuck roller?

@TheLouisianaHobbyGuy 9 месяцев назад

The jaws can open to a max of 4 1/2". My partner Patrick did a 40oz mug style on his. You would have to remove the floor of the machine to do one that big, which is what it's designed to do.

@user-wn7xm4qd8i 9 месяцев назад

thank you ill give it a try.@@TheLouisianaHobbyGuy