Тёмный

Cleaning the LaserMATIC MK2 

The Clack Shack
Подписаться 31 тыс.
Просмотров 1,5 тыс.
50% 1

A step by step walk through of how I clean my Roly Lasermatic MK2 30 watt. This was a requested video, I hope it helps... I also used the #clackvision glasses to give a better perspective of the process. I use the RayBan Meta glasses to create those shots.
For templates that I have made, check out my Etsy shop. I build files for projects and tools for laser engravers.
theclackshack.etsy.com
For Clack Shack shirts, check out my store:
the-clack-shack.creator-sprin...
The links below are affiliate links that will direct you to the product in this video. If you use this link for a purchase, I will receive a commission from the purchase. I remain unbiased and honest in my assessment as always.
The Clack Shack on Amazon= www.amazon.com/shop/theclacks...
Roly LaserMATIC MK2- rolyautomation.com/mowbtv
3 in 1 oil- amzn.to/3SV3F2u
Ray-Ban Meta smart glasses- amzn.to/48u8WE0

Хобби

Опубликовано:

 

24 фев 2024

Поделиться:

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист
Посмотреть позже
Комментарии : 33   
@bazookaproof2
@bazookaproof2 4 месяца назад
I ordered some of those glasses. My wife says I need to stop watching your channel:)
@TheClackShack
@TheClackShack 4 месяца назад
Don't get me in trouble... lol
@walonguy111
@walonguy111 4 месяца назад
Great instruction Clack, thank you!
@TheClackShack
@TheClackShack 4 месяца назад
Very welcome
@jf5336
@jf5336 4 месяца назад
Great video, thanks for the tips.
@TheClackShack
@TheClackShack 4 месяца назад
Glad it was helpful!
@markpatterson3189
@markpatterson3189 4 месяца назад
When in doubt when I’m cleaning stuff near sensitive electronics, I spray the cleaner on my rag then wipe down the surfaces.
@TheClackShack
@TheClackShack 4 месяца назад
That is the best practice
@KnotboredWoodworking
@KnotboredWoodworking 4 месяца назад
Your best guess as to how many work hours or projects between cleanings. whether recommended or just guessing as to how often is needed. Ive cleaned mine once and it was dirty after a dozen or so projects plus jigs and tests. It wasnt bad but the underside was kinda nasty
@TheClackShack
@TheClackShack 4 месяца назад
20 ish cutting boards, some leather projects and many testing burns. I also cut out a sheet of wooden coins yesterday. More than I probably should have before cleaning... lol
@justinbanks2380
@justinbanks2380 4 месяца назад
Great video showing process of cleaning. I've never seen a video before showing the process before. I'm pretty sure I'll be getting this machine. Do they have a hidden place to order different laser modules? Currently 10 and 20 are only versions available. I think the 20 will be good enough for me, but curious if in future could upgrade the head. (Or if they have any plans to release an Infrared module for metal)
@TheClackShack
@TheClackShack 4 месяца назад
The machine is switchable. They seem to be selling out of the 30 watt models pretty fast.
@esfsnip2321
@esfsnip2321 4 месяца назад
Set a magnet on the machine for the screws, it should help.
@TheClackShack
@TheClackShack 4 месяца назад
Yea, I usually don't loose them.
@LarryDMitchell
@LarryDMitchell 4 месяца назад
Good clean (pun intended 😁) process and video. Thanks
@TheClackShack
@TheClackShack 4 месяца назад
Thanks…
@gregwilsonnaturephotography
@gregwilsonnaturephotography 4 месяца назад
I have a Xtool D1 pro 10 watt and rotary arriving Tuesday. I gave up on my Genmitsu Lc40. But I see the 10 with rotary this brand was not much more money. I wonder if this would have been a better choice. I am a complete beginner. Greg
@TheClackShack
@TheClackShack 4 месяца назад
If you needed an enclosure it would have. Both lasers are good machines
@gregwilsonnaturephotography
@gregwilsonnaturephotography 4 месяца назад
As you mentioned, alignment of the bed and rotary would be easier. As well as having a camera. And seems like everything is contained in the enclosure. I figured it would be easier as a beginner.
@Redthumb45
@Redthumb45 10 дней назад
I noticed that when you move the gantry, the fan at the rear spins. Is this the generation of electricity that you mentioned earlier?
@TheClackShack
@TheClackShack 10 дней назад
Yes
@Terry_Genereaux
@Terry_Genereaux 4 месяца назад
If you remove the honey Combe as it need to be cleaned anyway it makes it much easier to cleann
@TheClackShack
@TheClackShack 4 месяца назад
Mine isn't ready for cleaning yet.. thanks
@woodknack1
@woodknack1 4 месяца назад
Im on the fence between the 30w and the 20w. Do you think there is a big enough difference to get the 30w over the 20w. I wouldn't be cutting more then 3/8" at most. mostly 1/4 and 1/8th.
@TheClackShack
@TheClackShack 4 месяца назад
You can do most jobs with either. Time would be the only difference.
@ValricoDave
@ValricoDave 4 месяца назад
I'm afraid of stripping screw. Are replacements available?
@TheClackShack
@TheClackShack 4 месяца назад
Typically, if you strip the threads, it will be the threads in the hole before the screw. Screws are steel and chassis is aluminum. Just be careful..
@torowazup1
@torowazup1 4 месяца назад
👍🏼👍🏼👍🏼👍🏼👍🏼👌🏼😎
@TheClackShack
@TheClackShack 4 месяца назад
Thanks
@woodworkergene5416
@woodworkergene5416 4 месяца назад
Hi guys 👋🏻
@TheClackShack
@TheClackShack 4 месяца назад
Hello
@Terry_Genereaux
@Terry_Genereaux 4 месяца назад
I take my MK2 every Saturday to the Spa …
@TheClackShack
@TheClackShack 4 месяца назад
Good idea
Далее
My secret to making a great jig
51:39
Просмотров 42 тыс.
Amazing weight loss transformation !! 😱😱
00:24
ЧУТЬ НЕ УТОНУЛ #shorts
00:27
Просмотров 6 млн
Engraving leather on the Lasermatic MK2
32:54
Просмотров 6 тыс.
This Is the ULTIMATE Diode Laser! The LaserMatic Mk2
20:41
How I started my business
21:39
Просмотров 1,9 тыс.
Simple items to sell at events
19:51
Просмотров 135 тыс.
Engraving silver tumblers without marking spray
15:07
XTool D1 honeycomb holder / jig adapter
29:21
Просмотров 40 тыс.
Поел индийской еды...
0:15
Просмотров 1,3 млн