🚨Secret*🚨 Belt Trick CrankPulley Holder! How to Remove Crank Stubborn Bolt  

At this time my Impack Not strong enough to do this Job. Lol

Im Breaking this Bolt loose first and finish it off with a Tiny Impact 😅

Need a 1 inch impact and 50 hp compressor. It'll set you back 10,000 bucks.

@@nevinkuser9892you really don’t, we did a timing belt and water pump on a j30 like 2 days ago and the crank pulley bolt came off with the Hercules 1/2 inch impact form harbor freight. And if that doesn’t work you can always pull fuel pump fuse and attach a breaker bar to the crank bolt wedged between the control arm with the crank pulley holder tool from auto zone that’s 20$ and crank the engine. The starter turns the motor and the breaker bar holds in place that’s normally enough force to break it free

Happy to help

True but this engine on the floor dosent start lol.. But becarefull some engine spin counterclockwise

Try to chisel it out with a hummer, good luck hope you get it out

I will try that next time I'm doing something with it again

Why not skip the ratchet and just use the impact

​@@01abihsotuse a breaker bar to get it started to save your impact.

One reason to make the video a little longer..lol

If there's no compressor available and no other impact guns work, I'd try this.

Was only done in the garage shop with lowbudget 😢😟