🚫Don't SMACK It🚫...✅PUSH It!✅ Kitvance Accucraft Sight Pusher Review & Demo 

Many thanks for showing the proper methods to move sights. Though long retired from my gunsmith business, I'll still work on friend's weapons. There's a similar vice-like tool in my little shop. It's the only way to go!

I have the same device that is Wheeler Engineering branded and have used it dozens of times with good results. Good job explaining how these work. Some sights will be tighter and require more force to turn the crank than the Glocks in the video did, but they will go. Its important to get the pusher as low on the side of the sight as you can without hitting the slide or some sights may want to lift (torque upward) in the dovetail - not good.

I was relying on a brass punch and a hammer but I have purchased one of these Accucraft Sight Pushers and just wanted to get anothers observations on it. Thanks for the walk through.

I like to thank you for the demotion. just got my push tool in & getting ready to put it to work on Glock & 365xl slide.

I bought one, worth every penny. Changed out front site to fiber optic on my 365XL…getting ready to do my 1911.

👍 I misread the title the first time I looked at it and thought it said aircraft and wondered to myself , what is this joker trying to sell us now !

What a great tool! When I've put my slide on a vise, I've always been concerned about scratching or warping it. This will prevent that. And it looks pretty precise too.

That is a great tool to have, I'm glad for ya, I don't have any tool that requiers one, but if I ever get one I'll sure keep it in mind, And I'd like to thank you again for the .22lr & WMR test yesterday, That is some very valuable information and I took notes and screenshots, BTW, I have a box of Stingers, It came as 4 boxes of 50, in a bigger box and on the side of the big box it says 1395 FPS from a 6" barrel, well we all know now that it ain't so, and as I said before I told my Sister about using your link to Amazon and she agreed. Stay Safe and thanks again Brian. 👍

I have one, but it's s Woloveevo I got off Amazon. It looks just like yours, even the same color. I'm gonna use it to remove the rear sight from my G19 so I can install a plate to mount my Vortex Venom Red Dot sight to.

Neat little tool. Glad you spent time to figure out the best ways to use it correctly. That's saves buyers any issues. Price is inexpensive for what you get in return. Nice. 👍 🇺🇸

It’s a great tool I got one just like it and had it for 5+ years and have used it to install 40-50 night sights. I love it! Great tool.

Good looking sight tool. Especially if you change a lot of sights on many guns. I like you have used a vice and punch for many a pistol. Thanks for the video and information.

Excellent tool for gunsmiths. It is better to use a sight pusher so we do not damage the frame. I recently mailed my slides to a gunsmith to remove the rear sights & add an optics plate to my Ruger SR 22 and S&W EZ 380 Performance Center. At this time, Ruger SR22 and S&W EZ 380 are not optics ready. I saved a lot of money with the conversion kits. Galloway Precision and Outer Impact sells these conversion optic plates. The Custom Shop (gunsmith) in Halworth, NY will do the conversions for a small fee by mail.

Just got one for Christmas. Looks solid. Can't wait to use it. My rear sight on my LCP Max needs go a little to the right.

Never knew there was such a tool. Thank you Tools!!

I just ordered this from Amazon. Looking forward to using it your video helped me decide which sight pusher I wanted. This one looks like a great value! Thanks 👍

When I put together my first Glock like gun (that I don't like) I bought all the sight tools, they make it easy

I have a vism sight pusher. Love it. Punshing sights is miserable work.

Have a sight pusher I’ve used several times over the years, handy to have around. Nice looking new tool Tools! Thanks for sharing.

I have the Wheeler version and many times I have had to apply tension with the knob then tap the black steel part with a a small ball-peen hammer to move the rear sights on some pistols.

Bit of a process to get it all set up the right way, but it really is the best way to do it. It sure beats a punch and a hammer. Have a good one brother see you on the next one.

Way to Go Tools! Man, I can see you on TV doing commercials! You need to get an agent and look into that for another career path!

Very handy!!!

Awesome video sir!! greatly appreciated. I was actually looking for something like this & you came out with this. I definitely be following the link and order one. Thank you for the instruction, have a great day and stay safe

Watched this video again to set up my sight pusher I opened it on Christmas but just set it up Thanks for the tips buddy saved me a lot of time instead of figuring it out for myself. It really is a quality tool.

I have been looking at all the different options on Amazon the last couple of weeks.

First one I ever seen. Nice demonstration, very informative. Good job. May have to consider one of those. I usually use a gun tool kit hammer and brass punch. The punch don’t mark the sight up. If you take it easy. Thanks for sharing. Good stuff once again. Be safe 😎🇺🇸😎

Very cool tool that I wish I had when I replaced the sights on my Canik. But to buy one just to replace the sights on my one pistol would be overkill. Great for someone that works on lots of guns. You should have seen me trying to use a brass punch, cork, cloth, plastic and my tack hammer, trying to hold it all in place, trying different things while gently tapping the sights out and in. Fumbling around. Dropping my tools. 🤦🏼‍♂️ Dang near took me 2 hours. But I got it done. This would have been so much easier!

that looks useful

Great video 📹 still excited to see you go over the reloading process that you have found works best

Looks very nice. BUT the pusher blocks are too wide to get into the dovetail. Your pushing the top of the sight into the slide. If you get the tooling into the dovetail you get a straight push. I've got a cheep ~$30 pusher but it get down onto the dovetail and does a great job IF you get everything into the fixture right.

Really sweet little tool to have. I wish I'd known about this when I was trying to drift my Springfield site. Thanks T.

The sights on my Taurus G3 come off very easily. Although, not a bad idea for some other pistols. Great review Brian! Appreciate ya!

This looks easier than smacking it with a hammer. Thanks

I have had this same tool (under the GOWQUAS brand name) for about a year. It is identical to the one in this video except that it has a steel pusher screw handle and did not have that extra nut. Same price on Amazon. Only used it a few times but it did do the job. I like that it works without needing specific adapters for most guns. I have had to assist it with a few taps from a hammer and punch on extremely tight rear sights. Overall it has most of the capability of much more expensive tools. I think I might actually prefer this one here because the steel handle on mine is not very comfortable.

Just got mine in. Can’t wait to try it.

that will definitely make life easier to change sights. appreciate another great video keep them coming

I would say worth every penny, especially with that 20 off code, nice! After installing 3-4 sets of sights that would give you great peace of mind to not damage your investments trying to upgrade sights and end up scratching or marring up your finish! 👍I like the precision markings on it and you can flip that jig over for flat sided sights! Good stuff thanks!

Nice Tool to have 👍🏼Tools Great demonstration on how to use it Stay Safe Stay 2A Strong 🇺🇸

Good demo. I will take a close look at that tool.

thanks i just bought one to put TruGlow sights on .. this video was very informative....and gave step by step instructions

Cool! Thanks for letting us know about this

Just use a brass punch instead of a steel if your plastic one doesn't work. Awesome video. Lol I'm a gunsmith and have been looking for a new sight tool. Thanks for the info!

That sir is a very cool tool! Those hands look familiar, you do any modeling for Palmolive in the past? JUST KIDDING!!!! Cool little gadget. I want to move the rear sights ever so slightly on my XD but don't want to beat on it with a hammer!

Lol I just recently wanted new sights too!! Thanks for sharing!

Nice tool Tools, sorry couldn't resist that one. Someone in the business or who had a lot of firearms they want to change sights on, it would be a benefit. But for someone who's not changing sights on a regular basis I'm not so sure about the cost effectiveness. I will say I like seeing these kinds of instructional videos as well as the ammo & firearm test. Be vigilant, be safe.

Very nice Tools! That tool works great!

Nice tool! Brass punch and hammer still works for me . Don't change sights that often.

Wow, wish I had one of those awhile Back !! Thanks

Thanks. I didn't know a device like that existed.

That's a great little tool. And it will save you money and time from taking it to a gunsmith.

You musta been lookin over my shoulder last wk sir🙈😂. Over the years i kept tellin myself i was gonna get one but i kept on bein cheap lol. I'd always dress my sights and use a brass punch and check centering with calipers but yea i'd much rather have this.

very nice, thanks for the review and have a great evening.

Excellent Review! Thanks

Can you make a video on the 10/22 with that tool , 🔧.

This product is on sale as of today August 16! It has a 25% off at checkout!

Cool tool MR TOOLS👍👍

thats pretty cool tool i always used a punch

WOW! That is one fancy sight pusher. I have a pusher but nothing that fancy. Imma have to look into getting one of those. Looks real easy to use. Thanks Tools 👍 Stay safe God Bless ✌️🇺🇲

Looks dang near exactly like the Wheeler. I have a Wheeler and it's great.

Cool tool! Just ignore what Steppenwolf had to say about the pusher...

Where did you buy your backplate from?

Cool tool that may come in Handy , Thank You

I have the other one you reviewed. It is great 👍

Another great review video Brotha ..

Tried using a nylon punch on my 9 EZ. Didn’t work. Now I just aim to the right a little. 😆 👍👊🇺🇸

Reminds me , I need a set of punches , tools & ammo.

Say no to smack!

Cool sight adjuster

Have a Glock sight moving tool works well.

Speaking of sights. I got my new AR iron sights today from NOS EXA GROUP - The Alpha and Omega tangent sight system. They are 3D printed from an extra harden 3D filament. It is definitely something that I was excited to purchase and use on my firearm.

That a very nice sight tool.

Awesome been wanting one of these

I used a steel punch and a hammer a few months ago. It worked, but marred up the sight some. Good thing it was a cheap front sight for my nightstand gun. I came looking for a vid on this cuz there's a guy in Texas Gun Trader wanting 75 bucks for his. I can get get it new with free shipping for 60 on ebay. How do you make sure you are directly in the middle?

I found one of these sight pushers on Amazon for $69.99 and wondered if this was the right price or is the Kitvance sight pusher on Amazon a Chinese knockoff as I got burned on Amazon with a Chinese knockoff of a Vickers VCAS sling so I am a little gun shy on Amazon purchases and just wondered if $69.99 was the right price or a red flag? I read some of the reviews and some guys had problems with rear Glock sights raising up out of the dovetail instead of sliding into and across the dovetail and I was wondering if the height adjustment was wrong for these guys and wondered if they removed the nut that was specified in this very helpful video. The other "Hmm" thing is that the same sight pusher on Amazon has a wheel on it like a bank vault with 4 or 5 rods instead of the plastic knob like the one in this video. One review also said this sight pusher is for rounded slides instead of squared slides and also said that this sight pusher will not do sub compact or compact guns in which I have a Glock 26 and a Sig P320x compact that needs new rear sights so that is holding me back a little and I'm not sure if this pusher will do the sights on my Springfield XD's and XDM without stripping the fine thread on the cross adjustment/main pushing screw but then again anything less than dynamite may not help with sights on an XD

Seems a lot easier than using a hammer,a nail punch and a wirenut Thanks Tools Stay Safe and God Bless 🙏

You mean you don’t just smack it with a hammer? 😂🎃

Just got one , good review

👍👍a great device, thanks for sharing

Nice video, thanks

I bought a Glock 19x, I can’t remove the back sight with this tool.

Definitely looks like Accucraft engineered a sturdy and thorough tool Tools. I need to resolve to budget my funds for a sight tool, seriously tired of holding my mouth just right

Don't smack it, push it? What if I want to do both?

I like it! 👍🏼

Very Nice !👍

They sent me one..works well

Neat little investment

🇦🇺😎👍More tools for the laboratory Sir 🤠🇺🇸🏁

Looks like a Rock Slide pos slide

I like it

I got one

Is that set up very expensive Tools???????

That is a nice looking one. I have been wanting to get one ,, i just have been putting it off,. Shane on me.

Tools hey buddy

👍🏻nice

I use a hammer and a flat head screwdriver. If I break the sight, that means it's a junk sight.

👍

Bump

Thanks T&T. Great job. Good info. Looks like a fine tool. God bless. LETS GO BRANDON

😎