0.6 Nozzle Cura Profile for Quality Small 3D Prints

Подписаться 297 тыс.

Просмотров 61 тыс.

50% 1

Chuck shares a new 0.6 nozzle profile that can print fine detail on a low cost Ender 3 Printer. You can download the profile for free at the link below (until March 31 2023).
0.6 Nozzle Good Profile:
thangs.com/file/786438
Hinged Calibration Cube: www.thingiverse.com/thing:494...
Ender 3 Neo:
bit.ly/3QDhrEN
Ender 3 V2 Neo:
bit.ly/3A4iXbU
********* $3 - Ender Style Cura Profiles Download Links: *******
Latest V5.x Profiles: rb.gy/5k981c
TPU Profiles: shorturl.at/V08bk
PETG Profiles: shorturl.at/RLEfI
(Free to Patreon Members)
**** Support the Channel *****************
Financial Support through Patreon:
/ elproducts
***** Tools *****
T - Handle Allen Wrench Set: amzn.to/3MBBv8i
Filament Friday E-Leveler Tool
amzn.to/3ishwM1
Filament Friday Tool Kit:
amzn.to/2MOR00X
Nozzle Removal Tool:
Palm Ratchet: amzn.to/3u6ncm7
Premium Version with Rubber Grip: amzn.to/3qPs3pB
1/4'' Socket: amzn.to/2OjdHdg
***** Popular Prints:
CHEP Cube Test Print: social.thangs.com/m/21739
CHEP PTFE Cutter Tool: social.thangs.com/m/23507
CHEP Pawn: social.thangs.com/m/29643
***** Ender 2 Pro *****
Creality Official Reseller Comgrow: bit.ly/3tnLuHn
Amazon: amzn.to/3sLuSaW
***** Creality Ender 3 Pro: *****
Creality Official Reseller Comgrow: bit.ly/2SIMa86
Bundle From MatterHackers: bit.ly/2FuKFpu
***** Creality Ender 3 V2 ******
Amazon: amzn.to/3ioLVsC
Banggood: bit.ly/2MQ5VGM
Creality Official Reseller Comgrow: bit.ly/30gh9OD
***** Creality Ender 3: ******
amzn.to/3fSIISy
Creality Official Reseller Comgrow: bit.ly/2sEthbX
Bundle From MatterHackers: bit.ly/2ZvGLnE
***** Creality Ender 3 Max *****
Creality Official Reseller Comgrow: bit.ly/3oXr3wi
Amazon: amzn.to/3p0oYzB
Direct Support through PayPal donation:
www.paypal.me/elproducts
Support the Channel here and Shop at MatterHackers.com and you automatically donate to the channel at no cost to you:
bit.ly/1Ugcijp
Buy thru this link to Slice Engineering for the Best Hot Ends and get 5% off your purchase:
www.sliceengineering.com/chep
************************************
***Creality Ender 3 Parts/Upgrades ****
Ender 3 Glass Bed:
Amazon: amzn.to/3tYea7m
Replacement Nozzles for CR10/Ender 3:
amzn.to/2m39K1y
X-Axis Tensioner
amzn.to/38BKbYP
Y-Axis Tensioner
amzn.to/2PhOdhi
Chuck's Favorite EZR Extruder:
bit.ly/2rlKCpp
Creality 8-bit Silent Stepper Board: amzn.to/2YPM0Nh
Cap Tubes & Couplings: amzn.to/2Vf8BCf
CR10/Creality Ender 3 Nozzles: amzn.to/2m39K1y
CR10/Ender3 Silicon Heater Block Cover: amzn.to/3sfDG7s
Solder Sleeve Kit: amzn.to/2Pqqngm
Creality Ender 3 Fan Set (24v): amzn.to/38u9aOl
CR-10 Fan Set (12v): amzn.to/2PrcCxK
T-Nuts Kit: amzn.to/2LsQZg8
Screw Kit: amzn.to/2Va8uGK
Temperature Meter Used in Videos: amzn.to/2JpUJOC
Screwdriver set used in Videos: amzn.to/2PbWocM
Creality Ender 3 Upgrade Package (Extruder, Silent Board & Capricorn Tubing): bit.ly/2MNvmcs
********* $3 - Ender Style Cura Profiles Download Links: *******
Latest V5.x Profiles: rb.gy/5k981c
TPU Profiles: shorturl.at/V08bk
PETG Profiles: shorturl.at/RLEfI
(Free to Patreon Members)
**** Support the Channel *****************
EBAY USA: ebay.to/1wtxfiU
EBAY UK: ebay.eu/2qdC5iy
EBAY Canada: bit.ly/2qdGRwh
Note:
As an Amazon Associate, I earn from qualifying purchases.
****************************************************
Filament Friday Sticker:
Send Self Addressed Stamped Envelope to:
Electronic Products
PO Box 251
Milford, MI 48381
****************************************************
Chuck's Arduino Book:
amzn.to/3tA31JP
Intro animation by Pablo Licari based on Filament Friday Logo by Brian Carter.

Хобби

Опубликовано:

9 мар 2023

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 169

@marcmaurette162 11 месяцев назад

Wow! Huge thanks, these profiles are so great. I just printed small (.75 module) gears with this and a .6mm hi-flow nozzle and they look/work great

@moulinherve8374 Год назад

I just tried it, perfect, Many thank's for your job.

@Viking8888 Год назад

As always Chuck, you are the man! I so appreciate all of the help you have provided with your videos.

@wagnerpscreations Год назад

Thank you very much! This profile helped me a lot!

@NothingSekret 11 месяцев назад

THANK YOU! As a new printer, I have been struggling to get a grasp on cura settings. Your profile made my prints 100% better!

@platinumdynamite Год назад

Switched to a 0.6 recently and this is a gift!

@Ringwraith19 Год назад

THANK YOU!

@operatingsauce Год назад

Chuck you've outdone yourself again! Thanks a lot for this.

@cwbbil2 Год назад

Just wanted to say thanks. This profile works perfect on my ender 3. The first two prints came out great. I just bought my first 3d printer about 3 weeks ago and I have been watching your videos and I just want to tell you that you're awesome dude!!!

@FilamentFriday Год назад

Thanks

@patissanchez 5 месяцев назад

CHEP, thank you, I used your profile on my CR-10 clone and it worked great. Seriously thank you for all of your videos, I learned a lot from your videos.

@FilamentFriday 5 месяцев назад

Thanks for watching.

@MrGerhardGrobler Год назад

Thank you very MUCH! Your profiles have saved me Time and money over many months now. With my government giving us around 5 hours of power at a time, I needed to learn how to use it wisely. Print resume doesn't always work as planned. So your super fast profiles have saved me both time and wasted filament. I use your Ender 2 profiles stock on all my printers. They are wonderfull. Yes, running 5mm retraction on a Ender 3 S1 sprite direct drive still works. And here you are giving another profile I will use on my Ender 3 S1 with the 0.6mm Creality Hardened Steel nozzle, I bought the verity pack on Amazon last year. From 0.3mm to the 0.6mm nozzles. Edit: Sometimes you just need a really good print, faster. And here you go again. Giving me what I need. I am prototyping new products. I am a very small, sole proprietor, looking at the big ocean. And here you go helping us again. Once I am set, I will support you more than just with a like and subscribe.

@platinumdynamite Год назад

Where do you live? Hope your projects are all going well.

@MrGerhardGrobler Год назад

@@platinumdynamite South Africa. Where crime and curruption has destroyed our economy. Where our chief of police (Since apointed to another office), a member of Interpol's wife turned out to be a drug smuggler. We are looking at 10 years of repairs to our power grid, if all goes well. 10 years to put it back to the condition it was during the apartheid era. FYI I am POC...

@tlc12070 Год назад

I just got a 0.6 nozzle yesterday. This is perfect

@PaulMcKillop Год назад

Brilliant, and thanks

@ronm6585 Год назад

Thank you CHEP.

@daarshg Год назад

Thank you for sharing this . I am currently using a slightly modified version of your 0.4mm profile for my 0.6mm nozzle on sovol sv01 and it works good. I will try this , hoping this might be better !!😊

@entilzhar Год назад

thank you for sharing young man

@bruceyoung1343 Год назад

Chuck. It feels like Christmas with the free profile. Thank You

@maciejj.wrobel2532 Год назад

Big Thumbs Up Chuck! Big Hug for that profile - THANKS A LOT!

@thumbtackj Год назад

You friggin’ ROCK!

@KevinGroninga3D Год назад

I second that motion! All in favor??

@HakkiOgrt 4 месяца назад

Thank you.

@fiocco10 10 месяцев назад

Thanks 😮

@luccaestigarribia4261 6 месяцев назад

you are the best, sir!

@yingbxua6240 Год назад

Man you have my sincerely thanks for the shared profile. Changed to 0.6 Nozzle and got printing spot on! Do you by any chance have other profiles shared 0.6 Draft quality / 0.8 Fine & Draft ones ? I thank you again for shared profile. Worked like charm on my Ender 3 with E3D V6 and BMG Bowden Clones installed

@CarlbergFury Год назад

would be SUPER nice if there where a set of "PETG -0.6mm Nozzle" profiles! Awesome work you do! Keep it up:)

@Blake27786 Год назад

I know you didn't have 2 do this now, but we thank you very much!!! Yay!!!

@tekno4blood Год назад

Thanks Chep! I gotta do some maintainence on a printer tomorrow, I might swap in a .6 nozzle and give this a crack!

@jimmysgameclips Год назад

I got a .6 nozzle thinking I'd made a mistake after the fact so this is great!!

@NiklasSimonsson Год назад

Profiles for Klipper/Sonic Pad would be awsome Chep!

@danielsefcik7901 Год назад

This is perfectly timed for me. I'm using a Ender 5 Plus, direct drive DIY conversion. I'm slicing prints to dial in material setting for Amoleb Wood PLA, I'm making a pirate ship "The Lady Harpy" an incredible stl from Loot Studios. So I want the ships hull, spars, Nast etc in the wood, but.... Wood works better with .5 or .6 nozzle. SOOoo a quality 0.6 profile is EXACTLY what I needed.

@OneHappyCrazyPerson Год назад

Now this is the content i love from this channel, go to Heck with those reviews. Anyone can make them, and they do!

@coolcat312 Год назад

Most of my prints lately have had more of a time crunch than a requirement for fine detail. I'm still running on 0.4mm nozzles. I think I'm going to give this a shot and see how much time switching to a 0.6mm nozzle will save me. This week I had two Ender 3s running nonstop from Sunday night through Friday morning and just barely made the deadline. A little more leeway would be nice.

@beauregardslim1914 Год назад

One thing I do like about 0.6 nozzles is that I can set the top layers to print at 0.4 line width and end up with some nice surfaces, kind of like ironing but faster. Probably depends on the nozzle, though.

@julianignacioaydarpaz3851 8 месяцев назад

Awesome profiles as always!! Are you planing to make a 0.2mm profile for fast high detail printings? I would love to see that coming!! Thanks!

@graphguy Год назад

You are the doctor of slicing!

@umbratherios5614 Месяц назад

and here I am, considering permanently switching to 0.2mm nozzles because of how CRISP they print :)

@warstoriesofthe88th Год назад

I wish I could get my .6 printing acceptably at all. I've tweaked everything, heat, layer height, retraction higher and lower, speed, infill types and amounts, replaced the bowden tube, calibrated esteps and linear advance and nothing will get rid of my stringing or tiny wall gaps. I hope I don't have to resign myself to stay on a .4mm nozzle exclusively.

@warstoriesofthe88th Год назад

Update- I figured out my main issue where the gaps were concerned. I'm now getting little to no stringing and no gaps. Everywhere I turned told me it was wet filament which just isn't the case (I have a dryer box and dried it multiple times.) I solved it by turning my retraction almost off to 1mm distance and worked up to the optimal setting for me and a Bowden set up on an ender 3 max, which was much lower than I was willing to try at first. It works well at 2.5mm retraction distance.

@bruceyoung1343 Год назад

You sure your not Santa clause with the free profile ? Your the best. Thank You 🙏

@mmjones00 5 месяцев назад

Great video and really helpful parameters. Have a project with larger / less detail pieces moving to .6 nozzle on the Ender V3 SE is a time saver. Having an issue with one of the pieces - infill is globbing up. I can hear the hot end hitting it and I stop the print. I’ve tried different infill types and slowed the speed, still occurs. Any suggestions appreciated on which setting likely needs the most adjustment.

@andrewpbclarke Год назад

looking at using to print T-Nuts to move my Spool holder to the top rather than the side on my E3 Max. Will let you know how it goes.

@mariacortes2314 6 месяцев назад

Hi, Chep can you do an in-depth explanation of adaptive layers?

@SwiftDustStorm Год назад

The top layer appearance can be improved drastically by having 1 skin layer at 0.32mm and having ironing on with 5-10% flow rate. The top layer for this profile is quite sparse.

@jesseburson Год назад

I'm going to give it a go @ .10 for mini armors. I tried it once before on an Aries, but the lines were still heavy.

@marine1718 7 месяцев назад

I love your videos when you move to orca slicer?

@josefdahari Год назад

You the best. I love my .6 Nozzle But was having an issue with print in place! Im going to give it a shot now Thanks chuck. I'm curious to know if you've tried CHT nozzles yet and what do you think

@daliasprints9798 Год назад

I've used both the CHT and Bozzle and love them.

@josefdahari Год назад

@@daliasprints9798 yeah I ordered some of knockoffs. Not that I support clones. But I figured might as well test them and see. I haven't put them in yet

@overseerbrian Год назад

@@josefdahari The MK8 CHT clones were unusable for me. My extruder kept slipping even at slow speeds. I don't know how the CNC Kitchen guy got them to work. Maybe if you already have a really good hot end, that can melt the filament quickly.

@josefdahari Год назад

@@overseerbrian yah I've been seeing a few people who are saying oh the clones are better than the originals yada yada I'm sitting on a few .4s and a few .6s haven't really got a chance to toss them on one of my printers yet. Was going to .6. But yeah I've seen CNC say it's been working great in using a stock hot end on sv01 figure I'd give it a try but yeah was worried it will cause more issues than I want. I don't even know what I'd do to gain the benefits of using them in the first place to be honest

@Bolation Год назад

Hi, Chuck. What is the best preset or settings for printing a dome (for a lamp)? I need it to be translucid and smooth as possible. I thought of printing it with no infill and no supports but my first attempts (with abs) ended up with layer (wall) splitting. Thanks!

@Nate-vh7et 5 месяцев назад

works good on ender 3 pro. thumbs up. only problem is the z hop. doesn't seem to retract enough or fast enough maybe, leaves a bit of a blob on the surface. any suggestions? feel like when i change my cura retraction, it doesnt do much.

@thatguyownzz1481 Год назад

Have you tried the concept of using a 0.4 nozzle with 0.6 settings? It appears to work as normal without pretty much any issues I've attempted this on a few items and seems to not be a problem

@yintang1000 Год назад

Love CHEP very much! Could you build a Direct Drive PETG version profile?

@ChuckTatham 10 месяцев назад

When I load this profile it reverts settings on the printer to .4 nozzle. If I try to set to .6 the profiles go away?

@darrenanonymous7800 Год назад

Hi there, I think your youtube videos are great /very helpful and always straight to the point. i have a question for you. have you tried a Lithphane Print with a 0.6 nozzle? if yes how did it look or will you be doing a video for people to see? thanks in advanced for your reply and keep up the useful videos

@thatguyownzz1481 Год назад

Lithophanes work well with a 0.6 I changed to one a while ago but went back to a 0.4 I use a 0.6 preset when I want to print bigger and a 0.4 preset for details, there are videos that kinda made me use a 0.4 with a 0.6 profile seems to work pretty well and best of both worlds

@leo3times Год назад

First.. thanks CHEP for all you do. I'm new to all this (3 months) and trying to start Into lithophanes (and modeling). Thanks for this profile. I'm wanting really nice detail because their gifts. So a .4 nozzle with a .6 profile would be good? Tried a .2 nozzle with a .4 setting a few days ago but I think my setting is off. Thx again

@thatguyownzz1481 Год назад

@@leo3times look up thomas sanladerer on RU-vid he has a video on it, I've been using it for about a week, I was strictly 0.6 nozzles till i thought about trying this and now it's working great I've printed off minis using 0.1 layer height and 0.4 extrusion now I'm printing a bigger model using a .24 layer height and 0.6 extrusion

@thatguyownzz1481 Год назад

Also just to note in using this profile now to print just changed layer height to .24 which is my preference

@leo3times Год назад

@@thatguyownzz1481 Thanks. Will check it out.

@Kotaztrafee Год назад

I'm trying to get an 0.6 to speed up my process with ASA. I have achieved the strength and speed I'm looking for but there is one (4mm dia.) area that is is curved upwards at a mere 70 degrees and I get curling at the edge which leads to a clump of plastic along the edge but is fine elsewhere. I've tried many settings but what the 0.4 nozzle has no trouble with the 0.6 insists on curling in this area. Even at 0.15 Layer Height on the 0.6 nozzle I am getting curling. As I understand it the theory is that the ASA is shrinking and I've adjusted accordingly with all the popular settings. Preliminary results of my tests so far show I can take my 8 hour print down to 3, if only I can fix this problem. I've run the normal Gambit of Temperature, Speed, Layer Height ect. so I am wondering if wall overlap and skin penetration and whatever else anyone can think of that might help.

@clixium Год назад

Standard 0.2 profile + arachne + klipper is magic by itself and cost nothing if you have old laptop laying around

@tomasartclara6450 Год назад

I use only your profiles. Thank you! Bro can you make a tpu 0.6 nozzle? Best wishes

@aimanramizu6901 7 месяцев назад

Hi, will this profile work with the ender 3 v3 se ? Was considering changing nozzle to 0.6 as I am looking forward to printing bigger multi part print

@abotolo Год назад

Very cool. I will download and install right away. Chep, would it be possible to focus on one of the next Filament Fridays on how to print PLA safely? I am a newbie with 3d printing, but I am concerned about the particles emitted when PLA is printed. There are several scientific articles online about this issue. As a hobbyist, I have the printer in my house. I love 3d printing, but I'd also love to print safely. I wonder whether you could suggest an enclosure, or filter, anything that might help us print happy and print safe.

@Cokedr Год назад

Just add those things you mentioned and no need for a video on it 🤙🏽

@printingwithlue4310 Год назад

That's badass. But I have a question: if we can adjust a 0.6 nozzle to do small good detail prints, can we adjust a 0.4 to do the same thing, but smaller? I have requirements for very fine, smooth, detailed prints.

@hspeed3656 Год назад

Like this idea of saving time on my prints and they still look good. I'll have to get some .6 nozzles. Trouble shooting question. I have Ender 3 and Cura version 5.2.2, For some reason recently when printing petg after preheating it changes the set temp from 235 to 175c and it goes into/errors and need to shut it down. If I catch it and adjust the temperature fast enough it continues and starts the print. I have search everywhere and can't see the where 175 is coming from. ? Ideas please.

@djgraffiti5627 10 месяцев назад

Hi is there any reason you chose inside out wall instead of the outside in?

@garthmccarthy4911 Год назад

Mix this to the arachnie engine and the .6 with this profile will be out of this world

@rodrigocaramello2348 Год назад

How much you had to adjust the retraction?

@karlnowakowski7866 Год назад

Probably time I make the move from simplify 3d to cura. Been using it since 2015 and starting to feel like I’m running windows 95 😂

@reasonablebeing5392 Год назад

I'm using other slicers when necessary but S3D for "everyday" use is the easiest and fastest to gcode for me. I paid for the upgrade.

@Engineerd3d Год назад

Awesome profile. How about a Superfast .6mm profile?

@FilamentFriday Год назад

Like this: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-dbJYQ4hYTMA.html

@dumdumreviews7436 Год назад

Any profile for SuperSlicer?

@veemajeno7511 Год назад

prints wont stick to bed so i use elmers glue snd works the trouble is i cant get it off the bed lol the bed glass creality cr 6 also some time i have string and sometimes the printer will break idk why

@beauregardslim1914 Год назад

should dissolve with water

@scottsingletary3601 Год назад

Does the version of Cura I am using affect my abilty to import this profile?

@awebuser5914 Месяц назад

I find with your fast settings and a CR10 + 0.6mm nozzle, I fight between poor adhesion or having the edges of the first later peel-up. It seems that if you "squish" the first layer extrusion a bit too much, it goes too flat/wide and "cups" on the outer edge, too little "squish" and it won't adhere to the caborundum/glass bed. 0.4 and default settings in Cura were never a problem... Ideas?

@laprizzle7587 Год назад

I'm trying your profile with my ender 3 V2 now. I notice that 1 second after every retraction, it makes a small gap in the print. I'm wondering if I should try increasing or decreasing retraction distance?

@BlindDude Год назад

THANKS CHEP! FJB!

@zve3332 Год назад

When I select petg with a 0.6 nozzle it disappears and comes back with a 0.4 nozzle. Why? I also labels it as LOW QUALITY for some reason

@SerDerpALot2015 Год назад

Tried the old .6 profile on a Neptune 3 Pro. Does not read profile due to elegoo_base. Tried transferring the settings using notepad but it just didn't print right. Will try this one. Was using petg

@zacharyjohnson6547 11 месяцев назад

i get the same issue but with pla and i cant seem to get the profile to go into cura

@scottsingletary3601 Год назад

I am tryign to add this profile to Cura 5.3 and can't figure out how to do it. When I run your file it just changes the settings to the current setting I have in Cura instead of allowing me to create a new one - help!

@laytonbrian 8 месяцев назад

You got a profile for .8mm nozzle?

@BeetnaOurHome Год назад

I need to help me with my printer to geat 90° printing

@alvasaris8662 10 месяцев назад

I'm using Anycubic printers - i3 Mega S and Kobra Max. Your cura profiles will not import. They give errors regarding quality type like "standard" and "low" not supported.

@zacharyjohnson6547 11 месяцев назад

the profiles don't seem to like the Neptune 3 plus

@travismohr8391 Год назад

I have some 0.6 nozzles and was considering switching over my Ender 3 S1 pro. Only problem is, I print lots of stuff from Cinderwing and Flexi Factory and I don't want to take a hit on quality. Anyone having good quality with a 0.6 right now?

@420247paul Год назад

yes the slicers use arachne now my 0.6 gives awesome detail i printed a lilith head in abs its chefs kiss good and faster

@travismohr8391 Год назад

@Paul Robertson so I bought a sonic pad for my 3s1 pro. Now I wonder if I should set it up first with the 0.4 and then move to the 0.6. Or, just use the sonic pad on my other printer.

@ryan9038 11 месяцев назад

Will this work with petg?

@cosmefulanito5933 5 месяцев назад

I think we are seeing different images. Because you say that the differences are very small in the Benchys at 0.4mm and 0.6mm. I see abysmal differences. Look at the ceiling. Look at the edges...

@kilogee700 Год назад

you guys have to remember this is with a .6 nozzle and sometimes if you need detail like this hinge you'll just have to settle for a .4

@justintrajcevski9902 Год назад

Hi Chep! Would these settings work on my CR10 MAX?

@enriquemp3424 Год назад

yes, they work on every printer

@Followyourfeet 8 месяцев назад

I can't download or purchase the profile. The link gives an error: Error: Server Error The server encountered a temporary error and could not complete your request. Please try again in 30 seconds.

@johninor7955 Год назад

Why is the infill line width set to .7mm? It seems to me that is a waste of filament. Unless you need an especially strong part, a smaller infill line width at whatever spacing is needed would use less filament.

@FilamentFriday Год назад

You can reduce it if you want.

@user-vi4sb7mk5z Год назад

does printing with a 0.6 nozzle use more filament? than a 0.4?

@FilamentFriday Год назад

It can. Depends on the slicing settings.

@MetalheadAndNerd Год назад

Yes, because the infill lines get wider and we cannot reduce the infill percentage since the infill density is needed for proper support.

@hendrikjbboss9973 Год назад

It seems like you cannot change the nozzle size in Cura 5.3 whilst in Cura 5.2.2 it's as easy as using a drop-down menu. So where has that option gone in Cura 5.3.0. Is this the point that I will be changing to PrusaSlicer 2.6?

@Kotaztrafee Год назад

Extruder / Line Width? Not sure but in the QIDI version of Cura I use the nozzle diameter is called Line Width. Argh

@tobywebb Год назад

Will these profiles work well on a CR6-SE?

@AndrewAHayes Год назад

You are better off just making notes of the settings and then entering them yourself, I uploaded the FF profile that was meant for an ender 2 to my Ender 5 Plus printer setting and thought I could just change the bed size back but even though I changed the bed size Cura thought my bed was the size of an ender 2 and it ruined Cura, I had to uninstall and go deep into my file system to remove all the files that an uninstall does not remove, after a couple of hours of painful file searching I remembered I could have just rolled back the OS to before I installed the FF profile

@rama3njoy Год назад

could you check high after slicing? layer high * total layers = ? mine losing 0.5mm on high

@FilamentFriday Год назад

You Z stepper is probably skipping steps. Check for resistance in the threaded rod movement.

@rama3njoy Год назад

@@FilamentFriday no chep, its on cura, for example 20mm high at 0.25 each layers, total layers 78. the right answer should 80 layers. It's happening when not using a 0.2 layer high.

@Meanstarinc Год назад

does this have to be used in cura or can it be used in any slicer

@tlc12070 Год назад

I think in a previous video he stated it can be used in any slicer.

@Meanstarinc Год назад

@@tlc12070 Okay awsome thank you 👍

@MCsCreations Год назад

Fantastic work, Chuck! Thanks a bunch! 😃 Stay safe there with your family! 🖖😊

@DavesChaoticBrain Год назад

How does Ender 3 compare to Neptune 2? Would this work on my Neptune 2?

@FilamentFriday Год назад

There essentially the same. I use my profiles on Neptune 2 all the time.

@agepbiz Год назад

Great video as always, and thank you for the shout-out🥰 I wish I dared to use a 0.6mm nozzle more often. I had a 0.6mm nozzle on a now decommissioned Ender 3 which I used for wood filament with great results

@scottsingletary3601 Год назад

hinges broke each time I printed....

@ryan9038 11 месяцев назад

I can't get it to load with petg. I keep getting an error. When I switch Is material to petg

@FilamentFriday 11 месяцев назад

They are designed for PLA.

@paulcumber4732 Год назад

how you been chep

@thebeastbrothers 2 месяца назад

I'm using an older Cura version and can't load the profile, do you have an image with the settings? thanks

@FilamentFriday 2 месяца назад

Too many to produce an image. I have older versions on my CHEPCLUB.com site for Patreon supporters. You could just install a later version of Cura as well.

@thebeastbrothers 2 месяца назад

@@FilamentFriday can’t install newer cura it needs newer os and that would break some old software I have thanks anyway

@123456789everyday Год назад

How do I download the profile it just keeps downloading a model

@11thHourRecords Год назад

The .3mf file contains the profile which you can add to your Cura for future use

@boyceunplugged Год назад

Is this profilegod for PLA?

@FilamentFriday Год назад

Yes. Created for PLA.

@Fish-de5yj Год назад

dude your link does not work. you get an stl file for a print but the cura profile is not working

@metrogp Год назад

Its working for me, downloaded it rn and already printing

@NothingSekret 11 месяцев назад

Works fine for me too. Ctrl+J and then hit import

@TheButchersbLock Год назад

You sir are a gentleman, thank you for all the work you do for us. .6 nozzles rock, with Arachne there isn’t many prints that need a .4 nozzle anymore. Cheers mate 👍🇦🇺😊

@markwhittington7682 Год назад

So sorry it will not let me I have a ender 3v2

@user-bt9ek2dv2y Год назад

Can this profile be used for anything other then an Ender 3?

@RANhxcCORE Год назад

I would be wary of trying this on anything that doesnt have a bowden setup like the ender 3, speeds might not match up.

@user-bt9ek2dv2y Год назад

@@RANhxcCORE ok thanks! I have a direct drive setup

@tekno4blood Год назад

I have an ender 3 DD, I think u might need to change just the retraction settings. If the flow is 100% and your E steps are calibrated it should convert well enough to try. might need some dialing in, but that's half the fun right?

@user-bt9ek2dv2y Год назад

@@tekno4blood Thanks! I have a Sovol SV01 and a SV06. I may have to give this a try. I don't use Cura (use PrusaSlicer) but I may give it a try. Thanks again!!

@tekno4blood Год назад

@@user-bt9ek2dv2y My advice, download Cura and load the profile he has, then go back and forth between the two and try to eliminate as many variables as you can. Build a new profile from his experimental one, save that, copy it into a new profile, and then tweek that one. If it's better than the last, erase the first modified version and keep going until its as perfect as you can make it. But that's just me.