#016

Подписаться 2,5 тыс.

Просмотров 9 тыс.

50% 1

Please support the channel for more free content like this here:
www.buymeacoffee.com/CameraRe...
or become a Patreon here:
/ camerarestore
Also consider subscribing and sharing with everyone.
In this video, I'm showing you how to take apart this Canon 600D (Kiss X5/T3i) camera. This is an old video that I never got time to finish, so it might be slightly different from the way I use to make the tutorials now.
DISCLAIMER:
CameraRestore is not responsible for property damage or injury incurred as a result of the information contained in this video. CameraRestore recommends safe practices when working with power tools and electrical equipment, use of lubricants, liquids, expensive electronics, or any other tools or equipment seen or implied in this video. Due to factors beyond the control of CameraRestore, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Any injury, damage or loss that may result from improper use of these tools, equipment, or the information contained in this video is the sole responsibility of the user and not CameraRestore. Only attempt your own repairs if you can accept personal responsibility for the results, whether they are good or bad.

Опубликовано:

14 ноя 2020

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 68

@AndySnap 2 года назад

Fascinating. Amazing to see how complex the construction & components are, even on a budget camera.

@bitkarek 9 месяцев назад

japanese engineers are crazy (in a good way)

@djkato-personal2242 3 года назад

Thank you very much. This helped me bring back my cannon 600D after a bad accident, where I tried using an old film flash with this camera, and something broke and the screen stopped working properly. Apparently when I shot, the flash sent current through the 3.5mm jack into the camera, and triggered something where itthought it has an HDMI device connected, which made the main screen black except when turned off (it shows cleaning sensor). detaching the ports fixed it, though a capacitor popped after turning it off first time with connectors removed. Works good now :)

@CameraRestore 3 года назад

nice, glad to hear it help!

@marc4244 2 года назад

Thank you for unveiling all that beautiful engineering. I own one of these models and have wondered what was under skin many times.

@CameraRestore 2 года назад

Hey, glad to hear, hanks for watching!

@user-ft3rv1dy7d Год назад

Excellent tutorial

@CameraRestore Год назад

Thank you! Cheers!

@lionellosanti 8 месяцев назад

Thanks. I thought you showed also the top buttons

@CameraRestore 6 месяцев назад

No, but once you take the top off it is easy to take them off.

@PracticalJohn 2 года назад

Had a very odd thing with my 600d where i left it turned on and the LCD stopped working / corrupted the SD, literally bricked the camera. Changed SD for a brand new one which boguht the camera back to life ... but still LCD non responsive. As a final resort I bought some contact cleaner and ... having used this BRILLIANT video tutorial to dismantle the camera (found all cables perfetly plugged in) ... I took the entire LCD, camera back and cables apart. Sprayed contact cleaner on those two LCD cable connections. Boom!! Perrfectly functional again. Thank you thank you thank you!!! Your video just saved a 600d! Very odd coincidence me leaving it on for the first time ever for a few days and the LCD suddenly not working. Anyway, just writing to say thanks! Great video!

@CameraRestore 2 года назад

Glad it helped, thanks for the feedback 😉 If the problem comes back I will focus on the lcd cable. An accurate visual check may tell

@PracticalJohn 2 года назад

@@CameraRestore I had another thought ... metal dust in the HDMI port. (Metal sculptor) When i followed your video i also used contact cleaner in teh hdmi port and blew it out with an airline. Perhaps there was a possibility of a short in the port that made the camera think an HDMI cable was plugged in and then disabled the LCD. Thanks again for the video, really helped.

@CameraRestore 2 года назад

Yep, everything is possible 🙂 You’re welcome!

@CameraRestore 2 года назад

@@PracticalJohn By the way, your work is remarkable!

@PracticalJohn 2 года назад

@@CameraRestore thank you brother! Now i can photograph it too!!! ;)

@fahimatil 3 года назад

Hello Brother..You did really great Job..Great explanations..really impressed Try to add White background..beacuse dark black difficult to watch..hopefully you feel as well.. Anyway great Job Mohammed Fahim Saudi Arab

@CameraRestore 3 года назад

HI thanks for your feedback. Ive did it in the past and to be honest I don't like it much, keeping a black bg you don't have any light bouncing back into the camera and also gets dirty very quick, I keep to believe you can focus more on what I'm doing. As you can see, I do prefer bk bg 😛 Cheers.

@Paul-AustinTX Год назад

Is it possible to replace the shutter from the front of the camera? If not, it seems that user replacement of the shutter isn't possible because of not being able to calibrate the sensor.

@CameraRestore Год назад

Correct, not possible without a bench tool.

@rodrigougarte5597 3 года назад

Hi! I used this video as a guide to replace the SD reader. Thank you!! After putting the camera back together, I get a message that says "Temperature is becoming too high. Can't shoot", and alternately, "Err 70". Do you know what this might be?

@CameraRestore 3 года назад

are you sure you've put all back together? try to turn off the image sensor cleaning option and see what comes out

@gabrielduarte7109 3 года назад

Hello my friend, excellent video, great explanations. I have a question, do I need to replace the full ViewFinder of my Canon 70D, after the change is any calibration necessary? Would I have a focus problem if I replace the ViewFinder? Thanks a lot friend.

@CameraRestore 3 года назад

Hi thanks, glad you like it. Why do you need to change the viewfinder?

@christagchurchbelize9668 2 года назад

Great video. My one stopped working recently. No power on, nothing. What could be the issue?

@CameraRestore 2 года назад

Thanks, any progress on your camera?

@GEOLPC 2 года назад

Even I have the same problem

@kikoboss001 3 года назад

hello . Is very good video , how would you fix a power board for a canon 600d that won't fire anymore. I can't find the smd fuses, see how to recognize them? I have 3 eos 600d hs, thank you

@CameraRestore 3 года назад

Hi thanks. Without schematics is really a pain fixing any camera boards, for me is time consuming so other than fuses, ceramic capacitors and some power converters I prefer to replace it. The 600D has a poor power board, not many fuses, most of the shorts are protected by chips. There are some fuses that are printed with 00 or R00, have a look on that ones... I have a SMD fuses list that canon use, if you want I can send it to you. Not on the 600D tough.

@kikoboss001 3 года назад

@@CameraRestore thank you for your valuable reply. indeed it is not easy and as I didn t find a workshop manual, I took measurements with my multimeter to compare the values, I have 3 eos 600d Hs, 2 eos 700d, and 5d mkIII and mkII ERROR 30, I challenged myself to fix them. sensor changes are easy for an amateur like me who does this for fun and friends, (i have already repaired 15 canon eos in error), but fault finding remains complicated. thank you for this valuable information. I found the list for the fuses but not for the 600d nor the 700d nor their location. thanks again

@CameraRestore 3 года назад

@@kikoboss001 You’re welcome, happy to hear that there are other people having this hobby. It’s a very satisfying experience. Error 30 is related with the shutter...

@doubledribb5796 2 года назад

What size screw driver is used to disassemble t3i screws

@CameraRestore 2 года назад

I'm using the Wera 118020

@triangulumx 2 года назад

How do you replace the shutter curtain ?

@CameraRestore 2 года назад

Sorry, not yet a video for that, but it's on my list of things. Not sure when though...

@eduardolarrea4426 2 года назад

Hello. Would you buy a 600D that was used a lot for video and today is not working showing error 70 for a price equivalent to 1/3 - 1/4 of its average market value?

@CameraRestore 2 года назад

Hi, I have other two on stock but I still might be interested. Drop me a message at: info@camerarestore.co.uk

@ME10920 2 года назад

Where's the best place to buy parts for this camera? I need a new main board

@CameraRestore 2 года назад

I have a little stock with parts, that's the best place I can recommend 🙂, not because is mine but because is one of the few ones that you can get genuine parts and not the poor cheap Chinese quality. have a look here: www.camerarestore.co.uk/Store/Cameraparts/Canon-cameras/Canon%20600D/

@jm1milli 3 года назад

Brother my audio is really bad when I record I hear hissing sound do you have any solutions?

@CameraRestore 3 года назад

Try an external microphone. If problem solved, means that your internal microphone is faulty. If you still have the problem, might be something wrong with the mainboard. Good luck!

@michellerodz Год назад

I am looking for an lcd screen replacement for my t3i. Does someone know where I can buy one?

@leonardorser3455 3 месяца назад

Amazon

@exocett8163 2 года назад

Hi,my Canon 600D is faulty.The camera stops working alone, everything is ok,but,after a moment,it just stop working..I have to open the memory card door,and it works again....I'm thinking about faulty power board,or maybe a component on the flex cable where the memory card switch is...Do you have an idea?

@CameraRestore 2 года назад

Hi, seams like a PCB issue rather than power issue to me... Didi you try with different memory card? Did the camera have any contact with water, humidity, prior to this issue?

@fahimatil 3 года назад

My mirror reflector in Canon 600D broken.. I need to replace..I have one faulty Canon 700D.. I think same mirror reflector both have

@CameraRestore 3 года назад

I've opened the d700 few times but not completely, anyhow should be the same. I'm working on adding other canon cameras, I hope to add as much cameras as possible. Stay tuned.

@fahimatil 3 года назад

@@CameraRestore Yes i already successful replace mirror box from 700d to 600D.. Or did it in first attempt..Your videos are very useful..thanks again

@CameraRestore 3 года назад

Nice, I'm glad to hear that, thanks. This is the point of this channel ;)

@indianrose1350 3 года назад

Hello Friend good afternoon. I would like to ask you a question. I have a canon 650D and it has stopped working for me. I have checked 3 different batteries and it won't turn on. What part could be the problem? Ignition plate maybe? I'd like to fix it, the camera is 8 years old but it doesn't even have 3000 shots. Is a common fault is ignition board damage on these cameras? Do you suggest me buy a specific piece?. Thanks for your video. I liked it a lot, I subscribe. A hug from Spain

@CameraRestore 3 года назад

Hey glad you like my videos. Sorry to hear about your camera but in order to understand what's wrong, you will need a complete check-up. You cannot make a repair just by guessing. It's true that quite often the DC/DC power unit may fail but not always. If you don't have any basics in electronics it might be difficult.

@indianrose1350 3 года назад

@@CameraRestore Hello friend, thanks for your answer, I am dedicated to mobile phone repair. I checked that the battery voltage was fine and correct. I have never had to open a reflex camera. Opening it is not a problem. Any suggestions or steps to follow? Thank you for answering me.

@indianrose1350 3 года назад

@@CameraRestore Could it be a board that has a large capacitor?

@CameraRestore 3 года назад

I have phone repair background as well so it would be easy once you know where to look. The best thing to have is a dummy battery and the amp meter setting on the multimeter (I'll put this on my list of videos to make one), in that way you can check the standby consumption, and not only, if you have a short somewhere you may detect it easier. Have a look on Ebay in your area or Aliexpress. also if you have an extra battery you can make one by yourself. For example: If you have a short on the power board, you will find it, its enough to disconnect it from the other boards. if you have a short into the mainboard and by disconnecting the power board the short disappears, you know the motherboard is the cause. So you ether repair or replace. Repairing camera boards is quite difficult because there are no schematics available to public.

@indianrose1350 3 года назад

@@CameraRestore Thank you so much for your answer. I will follow in your footsteps. I look forward to new videos. they are very good. thanks from Spain. A hug !

@cyreal9410 Год назад

I have a problem with my 600d. Everything is fine, but there is one problem, the display(monitor) it only appears in start up. And after a second. The display is off. Thank you.

@CameraRestore Год назад

So, the camera take and save photos?

@cyreal9410 Год назад

@@CameraRestore yes.

@cyreal9410 Год назад

The only problem is the monitor. It displays on the first start up, and after a second it goes off. I already tried removing the battery and changing SD card. Is there another way to access the settings so that if ever there is a setting for turning off the auto switch the viewfinder and the display of monitor.

@rachelemaruca9153 Год назад

Cosa bisogna sostituire su questa canon d600 mi da errore 70

@CameraRestore Год назад

Errore 70 è dovuto ad un errore proveniente dalla scheda madre. C’è un alto potenziale che la scheda sia da sostituire…

@rachelemaruca9153 Год назад

quanto costa far riparare questa macchina

@CameraRestore Год назад

Dipende dal intensità del problema.

@MiamiAtNight 3 года назад

One of the screws at the bottom of my camera got stripped or whatever you call it,so it won't come out whatsoever this sucks!

@CameraRestore 2 года назад

Ah, was happening to me too, specially at the beginning, using good tool will definitely avoid that problem.

@MiamiAtNight 2 года назад

@@CameraRestore I forced it open,lol terrible idea,don't get frustrated and do the same,guys who view this! lol still works tho haha but not the memory card I have to use it as live mode connected to a computer.

@PracticalJohn 2 года назад

@@MiamiAtNight better to drill the head of it, leaves you 1 screw down but at least with an intact case

@CameraRestore 2 года назад

Took a note on your experience, good for sharing some tips on that. I’ll squeeze my brain and see what solutions I may come with 😉