After driving with them on my truck for the last 5 months, I can say that difference between these headlights and the stock headlights is night and day. Sure, they're NOT cheap, but they are well worth the money
Just finished up install on my 2011 Pro 4X. Night and day difference between stock and these lights. Other have already noted that newer models have a single piece front bumper which changes install a little bit. The Pro 4X models come with a small front skid plate which will require you to climb under the truck to detach from the front bumper. Mine was 6 10mm bolts and 4 screws which removed the first part to give access to where the bumper connects to the skip plate with 4 10mm bolts. Way more of a pain as the truck has just enough clearance to get underneath, but not enough to be comfortable. I also had to trim the corner of the fuse box a bit to get the new daytime running light cable out of the box with it closed. Wouldn't close and pinched the cable really bad without any adjustments, but some snips fixed that issue. The LED fog lights that came my order didn't fit, wrong mounting bracket (they didn't have any mounting bracket and the stock ones couldn't be retrofitted onto them). Really disappointed there as I'll need to take it all apart again to install the correct ones, which I doubt I'll do since it was more of a pain to get access than anticipated. Overall, the lights are great, but this video is a bit dated with my install method (and more intensive).
I just installed a etc on my 18sv. 1 piece bumper, but you do jot need to remove the bumper. Just remove your grill. The 3 pins for the bumper that are under the grill, then pull the fender liner loose and remove the 2 10mm bolts that holdvthe edge of the bumper to the fender. The bumper is flexible enough to just move it out of the way to get at the side bolt, pull the old and reinstsll the new headlight.
My 2011 Nissan Frontier finally received its first pair of LED's by Sealight. Amazing transformation from OEM Halogen to brightness. These are really nice though, but surely above my price range
Love mine on my PRO-4X and it looks sick with the Midnight Edition grill on my white truck. I get lots of compliments and people have asked me if my truck is a newer model or trim level. The difference in light is night and day and I adore the day time running lights which are very bright. I have serious night blindness which is why I wanted these LED upgrades from a reputable manufacturer like Morimoto which solves the problem. Adjusting the lights took me about a week to get them where I like it without blinding other drivers or having them too low. Also got a great deal on Black Friday from Headlight Revolution!
I don't think this was mentioned in the video, but be sure you properly level your headlights after installing new ones so that you don't blind other drivers.
Perhaps an installation video on a newer model would be in order since the 2009 shown has an actual bumper and an upper bumper cover. Later years such as my 2017 has a 1 piece bumper cover that runs all the way down to the air dam. Love the way these look. Don't know that I'm interested in taking the whole front of my truck off to put them on.
great video!!! finally for my '18, i book marked the site saving up that upgrade also, project to my truck lift, brush guard, and those LED , happy to find this and DRL's that is also awesome to!
Very fair price is relative. Unfortunately the cost is to high for me also. I will have to wait for a competitor or your price to come down. It is just like tv’s when it is new a 65” cost 5 grand, now you can get one that is even better quality for under a grand. So that being said I gonna wait..
That is the point of the Hybrid series light from Morimoto, more budget friendly lights that reuse the OEM turn signal. This can be upgraded to an LED bulb!
They do not come in RHD configuration sadly, but we can help you see if they will fit! It does appear that they will work. Send us an email! Sales@HeadlightRevolution.com
That is for the install video! I got mine in the other day and installed them. I have the 2020 frontier midnight edition. The fuse box is different on the 2020 year, do you know which fuse to use on mine? I’ve tried multiple however they either don’t turn off or the headlights don’t turn on. Thanks!
Could you please make a video about the suspension that Nissan frontier has. I fell in love with the truck in the video. I want my truck to look just like that. Thank you.
Is there any headlight similar in what looks like a no brained upgrade for the 2005-2008 models. I have a 2007 and would definitely buy something like this headlights.
If you have them aimed properly, they shouldn't be at all. If you are not aware, we have a video on just that topic here: ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-OIow5YgdRro.html
Nothing like these available at this time for that year model, we do have some plug and play LED bulbs though that you could try out! Reach out so we can assist you! 218-755-5200 Sales@HeadlightRevolution.com
This video is incorrect. Their are 2 more screws they didn't show and the bumper does not pull apart that easy. These headlights are over $800.00 Better just buying Fahren leds
