0x60 Epson Error Code - PW sensor 

May be a short somewhere. try to wait some time, may be the liquid dry out and the short disappears

In most Epson printers the side panel is often held by tabs and hooks, no screws. you'll find disassembly instructions in this channel

IS there any error code in the Epson Status Monitor? It could be a paper jam or something inside the printer

@@viandant5 Hello my friend. Thanks for reply. Printer itself has a small screen. On this screen and when i turn on the printer, there is a message say "Printer error occurred. Please see documentation". If i connect the printer with my laptop via USB, and open the software installed in laptop (winXP), and try to print a page, the software gives me the error message : "Delete all print jobs and turn the printer off. Remove any foreign objects from inside the printer. After a few minutes, turn the printer back on". I tried clean the printer but i cannot go very deep because i do not know how to disassemble it, and also i am afraid that maybe then, i cannot put it back together, or brake something all thought i have disassembled many electronic devices with success, but first i must see how. The only thing i did it was that i removed the box which include the 6 ink cartridges, and tried to clean it, but nothing happen. Maybe one of sensors (the fp sensor or another sensor) is dirty with ink but i do not know where these sensors are. Or maybe there is a small piece of paper somewhere and i cannot find it. Please any help will be valuable.

@@krakadoros8605 Here you can find suggestions in case of false paper jam error : ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-yXWgx8m-gY0.html

​@@viandant5 Nothing work for me. Anyway thank you very much for your kindly effort to help me.

I don't know, however L18050 already is a DFT printer

All methods wil not work if the printer is broken and needs to be repared

It printed a full test page after completing a print head clean then the error 0x60 appeared?

@@martinwatson2235 Yes it could happen. It's better to make printhead cleaning only when necessary

same here xp322 error e1 code 0x60.. everything is in perfect condition. could it be a motherboard problem ?

@@khaledlarroussi1558 I tried replacing the edge guide out of another working printer still would not work i put the edge guide back into the original printer and it was fine. So I replaced the printer.

There are several paper sensors

I think you have to disassembly the printer and check the components, sorry I have no video on this printer and I never hear Al2358 QP101589 error codes

PW sensor failure, main board failure, paper or foreign object causing paper jam

It could be the main board, the connections of the main board, a phisical damage that causes the paper not to move correctly

@@viandant5 oke thanks mr viandant5, but..this printer ready status, i do print or cleaning head, this printer error 0x98

​@@giprintbatam9544 So the printer is working but with error 0x98?

@@viandant5 yes, printer only until ready to use.then, the printer can't print,can't noozle check,cleaning, or print..maybe this board damage mr vian

@@giprintbatam9544 Yes, it seems a mother board damage