1/64 Scale Tokyo Underground Carpark | DIY Automotive Diorama 

Thank you. Cheers!

More to come and I hope you like the other contents too. Thanks and cheers!

Thank you 🙏🏼

Glad you like it! Cheers!

Thank you, Lan!

Glad you liked it!! Cheers!

I used 1.5mm and 3.00mm foam core boards. Glad you like it, thanks!

Thank you! Cheers!

@Mistxyl_ thank you! wish I have the time to produce more.

Glad you liked it. Thank you!

Thank you! Cheers!

Thank you. Glad you liked it 🙏🏼

Thank you very much for the kind words. Cheers!

Thank you 🤗

Thank you!

@Zaky28_09 thank you. Yes, it is a sponge 🙂

Ok thx

Sounds like a great idea! Might try that next time. Thank you!

Thank you! Cheers!

Thank you! Cheers!

Thank you! Will consider your suggustion on the future videos. Cheers!

Thank you✌

@THEREALTIM0 Thank you. Base is 23.5cm(w) x 25cm(d) :)

@calixcarpio Thank you! It is sponge, the kind you use for dishes. Gives an uneven application and a bit of a textured finish.

Nice, thank you so much bro!

Hi! Dimensions are 23.5cm(w) x 25cm(d) x 6.5cm(h). That'll be able to fit around 4 parking slots with the post, or 5 if you decide not to include it. For the individual slots, i suggest you measure a true scale wide-bodied car (LBWK GT-R/458/Huracan, etc) just to make sure it'll fit and start your layout from there. Everything else (air ducts, post, wall trims, driveway) you can adjust the measurement based on your preference. Hope this helps and thank you for the kind words. Cheers!

@kennethlim6601 I used 6mm foam core board for the base. Glad you liked it. Cheers!

Thank you for your feedback! Will continuously try to improve on the new projects. Cheers!

@hideakiiwayainnoxitocsr4119 Thank you! Dimensions are 23.5cm(w) x 25cm(d) x 6.5cm(h)

@justart7483 Thank you! Material used is foam board or sintra board

@PiotrM92 If I remember correctly it's 72.050 Gris Frio/Cold Grey under the Game Color line of Vallejo.

@@mrltnj Thanks 😊

@iliashevelev7791 23.5cm x 25cm 🙂

@@mrltnj thanks!

6.00mm Foam core board 🙂

@sheikhnazib4920 TRD Supra by Mini GT :)

foam core boards 🙂

yup!

@CineDailies hi! the dioramas I make are solely for my own collection. Thank you for your interest though. Cheers!

@jethro25 Hi! Are you pertaining to the planning and design process? I use a pencil and a sketchpad :)

@goisjepagames5076 it's a foam core board

@heitorzinn_3023 hi! unfortunately, I don't have a pdf for measurements. But the dimensions are around 23.5cm x 25cm for the base, and 8cm in height. From there, you can refer to the cars for scale/measurements of the other parts.

@UnaverageCEO white glue and cyanoacrylate :)

Hi! It's possible to do so if given a larger workarea. Mine's a bit limited so I focus on 1/64 and 1/43 scale. Cheers!

@@mrltnj Thanks0

Foam core board 🙂

Thanks

Hi! Dimensions are 23.5cm (W) x 25cm (D) x 8cm (H)

Hi! Mostly 1.5mm and 3.5mm foam boards. :)

Foam core board 🙂

@FrostCar21 foam core board, skewer sticks, acrylic paints :)

3.0mm thick, base is 23.5cm by 25cm

@@mrltnj to all the creator you're the one whos willing give knowledge to others THANKYOU BTW!! i love all you makeee and im starting too create diorama too THANKYOUSOMUCH!!

@user-db9jq8qp8g glad I could help. Thanks for the support, cheers!

Materials used are mostly foam core boards. Paints are vallejo model color. :)

I met it dry and then I tape mais to appli white paint but each Time thé tape keeps peeling my grey paint

Hello! Im guessing your paint did not adhere well to the board and is too thick or your masking tape has too much adhesive on it. maybe you can try putting the masking tape on an unpainted surface first to reduce the adhesive? I also suggest you use Tamiya masking tape as it is very paint friendly.

@@mrltnj Hi thank you for your answer, does I have to let the paint cure a certain time too ? I will try your tips tonight, btw I bought 3 rolls of tamiya tape just in case :)

@@deltacharlie4399 with the paint and tape I use, i usually do it after about 30 mins of curing. I then immediately peel the tape outwards/away from the stripes after painting the stripes.

@user-yy1hh2el5r combination of foam boards, acrylic paints, cardboards, and skewer sticks

@@mrltnj thanks bro

@Haibeovietlienkhongdau hi! are you pertaining to the color names or the brand of paints?

@@mrltnj i need brand thank bro

@@Haibeovietlienkhongdau vallejo model color 🙂

@@mrltnj thank

@@mrltnjwhat is the code for floor colour bruh?

@user-nd2dc5hi4n my email address is on my bio :)