#1 mistake when installing GPU Graphics Card Video Card 

#1 mistakes when installing GPU Graphics Card Video Card. Ask me for GPU recommendations. My equipment: www.amazon.com/shop/cobuman Like on Facebook facebook.com/cobuman Tech and Science Articles: CosmicNovo.com goo.gl/W5rVa9

And you have me who tried to insert my ASUS GT 1030 without taking off the protection...

Can a pin break inside of the pc? Even if you take very good care and never dropped it or anything?

Sometimes u just need the little details to fix something so easy . Thank u for ur video , big help!

Yeah I was trying to upgrade my 1659super with a 1660 super and I took out the 1650 super nothing wrong before, put in the 1660 super and my friend said that I needed to delete graphics drivers before, so I put the 1650 back in and it was in properly. When I tried to use the pc again, the monitors would not receive any signal. I have tried everything imaginable and my friend told me that my gpu slot could be broken. I didn't ever force anything too much and put it back in weirdly. Do you think the gpu slot could have broken?

I miss my Geek Squad days. Got to play with 15 - 20 machines every day.

Umm a my 6+2 pin connector on my Power supply doesn't seem to fit would it be alright if I if I force it in my other pin 8 seem to fit fine but my 6+2 not I bought 6+2 pin connector and they don't seem to fit what should I do?

I just clean my case and inside because of full of dust and then when i try to open my computer it's not working properly yeah also there's was a display but the gpu is not working properly but before i clean it it's working fine..any help

bro at ur gpu there was one goldenpin scrathced i'm facing too same my pc is not turning on after placing gpu help!

Hello I recently bought a Radeon hd 8570 gpu but the bracket is too big for my optiplex 3020 sff and I was wondering what do I do?

Does a chip to the coil means its broken? Unusable?.

My games stutter and run on low fps regardless of settings while both my gpu and cpu usage maxes at 30% usage whats occuring?

I have a Z87 pro and can't fit my rtx 2060, is it normal?

Hi my monitor doesn't have display is it because of gpu? How do i fix it?

I have an old pc and i put a new GPU and it runs but it wont run any games can someone help im desperate.

my 3060 wont fit through my gap at all, what do i do?

rx 570 msi won't work with my 970a-g46 msi motherboard It works perfectly with my ASUS DIRECT CU II 2G R9 270X Video card.. ??? Please help? My RX 570 MSI Turns on card glows and lights up plus fans spin but nothing on screen? Tried all cables all outputs DVI as-well nothing? Power supply has 8 pin connector..

I have optiplex 740 when i insert new gt610 graphic card no signal and I inserted graphic card properly

What graphics card matches my old dell optiflex 740 sff 64bit dual 8g ram ddr2

Was struggling royally before I watched this vid, thanks man will make sure to sub!

hi, I have a DQ57TM motherboard with a corei5 processor. The power supply is 350watt but it doesn't have power connector for the GPU.. What GPU can I install to be compatible and doesn't need power connector? I prefer to have a 3gb gpu. Thank you

I have a MSi 4090 suprim which is a huge GPU but is not sitting properly in PCIe slot for nothing. I am seeing gold plated and it will not go in all the way and there’s no clip . I haven’t been able to identify the problem. I don’t know if is a case defect or I heard something too about the motherboard standup screws might probably have the motherboard sitting too low but I don’t really think so. But I will be looking into something that you mentioned at 3.44 in your video, which is something that really didn’t occur to me to check and make sure that it is inserting properly in there. By the way I have a Cooler master Cosmos c700M full case which it is a massive case itself so you wouldn’t expect any problems. Any other additional advice would be greatly appreciated

Currently upgrading old Dell Inspiron 560 to kinda learn my way around pcs. Using Core 2 Duo e8400 3.0ghz, PNY ge force gt 710 since it was cheap. What would be a good gpu to upgrade to and how do I go about installing drivers and what not?

Bho to me the monitor ecc. All works but at some point when i play i hear a beeping sound, the moment i exit the game it stops, no idea why especially cause the max temp thst i get is like 50° not more then that

My 3080 GPU doesn't slide into my motherboard and I'm afraid to break it.

Excellent explanation. Thank you! Do you have a recommendation for a GPU card that would fit and older mid-tower Optiolex XE2? Thanks!

What do you do if nomatter which way you bend the back plate it still won't line up? Mine is not lining up with the slot front to back by about .05mm, it seems the slot is almost too close to the back of the case by just a hair, I've tried sliding the board as far forward as I can and tried bending the tabs but it still won't go in

i broke the clicky one plz im crying tell me i can replace it

Hey I have a question at 2:19 I could see the second from the right connector piece is missing from your card, is that normal or did you break it because in my previous card that exact connector is also missing

Hey can we set up a video call because I’m a noob and I need help 😭

What do you need to bend

Why my pc wont turn on after putting a card in

Can you advise me please. I have a Gigabyte H61M-DS2 DVI motherboard. I also have An Asus GTX 760 GPU which fits fine and works well. Why can i not fit my new GTX970 then ? I have also tried a GTX1050, same issue, the small ten pin part of the socket is fine and fits, its the longer section that just will not go in. Please help

Hey I still need help could you help me .

Just wanted to say 'thank you' for the video, from a person who , with over 25 years experience in I.T. , needed to replay this video twice before I caught my problem. I purchased an MSI H87-43 as a replacement mainboard to host my i5-4440. Was a good deal, and it came with 32GB DDR3. by the time I got around to the build, I already bought another used PC, and it had became my mainstay, though it lacks in performance and eye candy. months passed and i bought new LCD fans, and gutted and painted my HAF half tower... I purchased a used crypto mining rig, because it came with a nice graphics card, EVGA GEFORCE GTX 980TI ACX 2.0. I spent 25 bux for a Mining rig with a $400 video card. Again, months passed as I had medical issues over the holidays, but tonight, I decided to install this GPU and load up my favorite FPS! I placed it in the buttery fly levered, PCI-E 3.0 first slot, I connected the 6 pin plus the 8 pin ( 6 pin plus 2 connector ), which is a pain in the ass.. especially because the case is so damn big, but still, I've got to double over to get every thing seated correctly. including the power connectors. Long story short, I had been messing with this for about three hours, get no post, no display, regardless the output type... I read the manual 9 times, , I RU-vid the motherboard and graphics issues.. your video comes up in my playlist.. and you keep saying... over and over.. almost monotonous... almost annoyingly... "make sure is fits"... " you don't want to push anything.." " make sure it goes into the connector easily..." " there isn't enough room, so I will place the graphics card in the slot in the back." I rewound the video and paid attention this time. I have not built a machine, or upgraded a PC in roughly three years. Without exaggeration, in my lifetime, I have easily built and deployed over 500 desktop machines - easily. and I'm the idiot who didn't notice that the GPU heat sink was resting on the CMOS battery. The card wasn't seating fully. I'm an idiot. worse I tried installing it in the next lower PCI-E slot, ( thinking I've got the problem resolved, felling a bit embarrassed) , I hit the power switch.....nada-- nothing.. same issue, except this time, I'm high centered on a capacitor, and the tail of the video card is precariously close to a chassis fan header. The only way to get this card... mounted to this motherboard... is with a PCI-E powered header; which, thanks to the mining rig, I have several. and It will go in the slot easy, and there won't be any pressure, and there will be plenty of room around the card with space for the connectors and the cables won't get in the way, and I won't have to start a new career over being an idiot who didn't listen.

I noticed one of my slot PCIE pins was bent back a bit, I did not think these would be a problem. The GPU seemed like it installed ok, but noticed the card was running as x8 not x16. If I added any other card to the system even if its a non-shared slot, it would drag it down to x4 on the GPU. Used a small pin and pushed the pin forward as best I can, now its running a x16 again, even with the other slot filled with a WIFI card. Interesting, the fact that this is almost impossible to see. I mostly likely did this damage when removing my GPU, as its a big 1080ti and is very hard to remove from the lock from this board. I could not find an example of this problem on RU-vid, so had to wing the repair.

My gpu and usb isn’t working I tried a lot of stuff would you be able to help

Well for my gpu it doesn’t have a area where we put a cable into no where on it so I don’t know what to do

hello,I've run into a problem I was trying to install rx 5600xt into my msi b450 gaming max plus and it seems the gpu is long and the sata port blocks on the right side prevent me from pushing it fully in and I tried with the bottom slot still doesn't fit in I've read that it shouldn't be doing this

I just changed my Nvidia 1050 for Nvidia 1050 ti And Now my pc won't boot up I just have black screen

I don't know if it has something to do with it, but after installing the new rtx 4080, my pc won't boot into windows, only a black screen appears after the bios and that's all. I have everything updated, bios gpu and boards, drivers...everything. The only thing that helped was changing pci-e gen4 to gen3, but I still don't know why this is a problem? GPU before was rtx3080ti and it works with gen4

want to upgrade but don’t know what to do, i have an “ibuypower i7-7700k GTX 1070 16gb RAM 240 ssd 1tb HDD” any advice would help, other option is to buy a new pc

Trying to install RX 6600xt onto Z690 Gigabyte Gaming X mother board looks like the m. 2 cover is in the way of letting the card seat properly in the PCIe slot? Can this be right?

i have a gpu, msi gtx 1050 ti with pci express 3.0 if i install it on a pci express 4.0, can be create problems on the system or doesn't matter the pci express slot?

Just recently bought a gt 1030, but my monitor shows no signal My pc and monitor work fine, but whenever i try to boot my pc up by connecting the 1030, it doesn't give me any signal i have a vga monitor so i use a female VGA to male HDMI converter to connect it with the gpu. I dont know what the problem is, i tried switching the display adaptor in the BIOS settings to PCIE, i tried lowering my resolution, i still dont know what the issue is. I think it maybe some issue in the converter cable but im not sure, can anyone help? my pc is compatible btw, my monitor just wont show any signal while connected to the gpu.

I was playing Elden ring and suddenly my screen turned off and now my screen no longer turns on whenever I connect it to the graphics card.. I have to connect to the motherboard for the moment and use the integrated HD graphics chip of Intel to use the PC. I just cant believe that my graphics card Nvidia Gtx 980 Ti 6gb (2015) just died, I mean I inspected it, and it looks impeccable, i also replaced the thermal paste, i checked the connectors..etc even when its running, I notice that the fans are running, the lights on the graphics card logo are on as well. The issue is, my pc no longer detects the graphics card, nor does the Bios. I dont get it.

I'm not totally sure if you're still responding to issues, or if you do at all, but after installing my GPU my computer refuses to boot to the login screen. It will 100% always crash with a System Service Exception, requiring safe mode. However, after running the solutions that the rest of the internet has told me to deal with SSEs, I even reset everything from square one, and as a result now I can't even open safe mode without a SSE happening. Normally I wouldn't drop this here, but the rest of the internet is lacking on solutions so I don't have a whole lot of options left

my gpu just won’t turn on at all. it worked fine 2 days ago but i brought it to another town and now it completely doesn’t work. what do i do

My gpu seems to be seated good but it’s just not coming up anywhere, the rgb lights up and everything but still isn’t read anywhere. I’ve tried multiple different slots too nd still nothing so I’m pretty stumped…

so my card its like not all the way in the slot its half way in only half of the thing is in the slot, I got It build from a store I noticed that today what do I do I won't push hard I feel like its going to brake. the graphics card is (Sapphire Pulse Radeon RX 5500 XT ) please tell me what to do :D

2:12 idk but those pin things on the bottom that slot in are too long to slot into mine lol. wasted $300 for nothing when i could buy a half built pc for the same price

hi i have a nvidia quadro 4000 gpu with no power connector i am looking to buy a pcie connector and connect it to the cable meant for the hd do you recommend this ? thanks

I'm not even sure how you're supposed to seat the newer cards in the first place, since you can't see where they connect and there's virtually no way of telling if it actually is in properly or not.

Video card for dummies then uses statically charged screwdriver & touches the gold connector of the card too identify the splitter 🤣

my pc suddenly wouldnt start after i install my new gpu, it needs no cables like a 4 or 6 pin. i put it in the gpu slot and my pc wouldnt just turn on. if i press the power button, it would turn on for 2 sec then turn off repeatedly. how do i fix this?

I installed a new gpu and the pc wont boot up I unplug the power from that gpu and it turns on any idea would a low wattage power supply cause this? Or could the gpu be dead?

Heyy i just got my new graphic card and when i installed it, whenever i use HDMI cable it beeps 5 times without screen shown, and whenever i used VGA cable it shows the screen but resolutions are low

Hello my GPU have work before when I connected but this time it dosent show no signal everything is connected properly.

One thing as a problem for me is that I plugged in my Gt 1030 it was working for a few months then it shows no display but the fan is running perfectly fine so I took it in then my Graphics card works perfectly fine now I looked a bit at my pcie slots nothing seemed damaged I opened my bios and all that now after i done that I turn on my pc mouse is stuck to the right side of screen I cant see it but when I flick the mouse fast it gets out for a split second got ideas on what i can do since the mouse is wireless I might buy a wired one but help me with these 2 things give me suggestions on what I should do please.

Thanks! Good tip to know. I’m actually to put in a GPU soon in a PC. Are they’re any mistakes before and after install to know about (as in making sure the computer is compatible etc)?

What is the slot above the gpu that look like a backwards gpu slot

My Rtx 3060 just won’t fit in it man 😓

Yes, would like a recommendation. I have an HP EliteDesk 800 G1 SFF w 16GB ram, Intel(R) Core(TM) i7-4790 CPU @ 3.60GHz, and the lousy integrated Intel(R) HD Graphics 4600. I believe the power supply is 320W. I am NOT a gamer and do not wish to be. However, I've already had some photo processing software issues related to the video driver. I'm looking at purchasing Topaz Sharpen AI and read that it doesn't support the HD Graphics 4600. Looks like I'll need a 4GB card at a minimum. I don't want any more than what would be an adequate recommendation so I can minimize expense. Simple plug-in, I hope. Thanks in advance.

Great video

Does not properly seated the gpu result in random restart ?

And witch way to bend

My graphic card is to big to be connected on the lines it doesnt fit Any tips

Ever since in took out my gpu and put it back in every game has been crashing on startup could my gpu possibly not be in all the way?

i got a small problem i tried to remove my gpu, i bust the clip that locks the gpu in place its a leaver thing you push down on to release the card i pushed to hard broke it..... can that be replaced? PC still works however the gpu seems to be stuck in the board! its locked in place it wont let go! i wanna upgrade my 2060 super but i cant get it out i guess im stuck with it.

krtica ali gre ali ne gre kot pnevmatika ali gre na avto rezerva ali ne res malo tako da ne postavis grafike pravilno lp slovenije

I cleaned my pc yesterday and i place the graphics card as you said, but when i play games my fps suddenly drops. i experienced the same issue whenever i removed graphics card and inserted again. can you please help me with this problem

Will i5 4570 be a bottleneck for rx 580 8gb graphics.. motherboard is h81

I remember the headaches that gave me the PCI-Express vga cards. There were combinations of motherboard / video cards that simply did not work. Probably errors in the BIOS (it does not matter if it replaced them and put updated firmware) or hardware level failures. The worst have been Asus and ASRock.

ISSUE: When I install my video card all of my cpu fans stop working. When I unplug it they start up again. What's going on?

GPU card is big & fits better in PCIe slot2, can I use it instead of PCIe skot2?

Dear, can you train us with server administrator, please, until zero

My smaller side isn't fitting in

So I have an RTX 3080 and it won't fit into the slot... Any tips?

What is the compatible graphics card for fujitsu slim type cpu.tnx

how would a radeon rx 6600 and a 10400F run together?

Mine doesn’t go all the way in on the left side

My you is a rx 580 8gb and the front won’t go all the way into my mother board I think my mother board is a b450m ds3h

i just install gpu and the i turn on my pc,but the screen pn monitor not turn it show black screen is it because i didn't install driver first?

I plug mine in both slots still dont get no display

So my problem is harder to explain, i have a older GPU wich is ddr2 and i wanted to use it on my new PC, the graphics card gets power and works but if i check in CPU Z, it shows the Nvidia logo but it didn't say the name and other stuff of the graphics card, it works on the old PC, also if i go in dxdiag, at device type it says Dispay-Only Display device And chip type:NVIDIA At name it says:Microsoft Basic Display Adapter, and on the other pc it says the name of the GPU I think i have to buy a ddr3

My pcie clip broke am I screwed ?

thnx so muchhh

I just bought gtx 1650 today and the gold line cant go inside all the way down but when i turn it on it work ...

Please more of this.. common errors in assembling pc... More power to your Channel. ✌✌✌

i have prebuilt with a i5-9400f and gtx 1660 but im experiencing low fps and fps stutter what could it be ?

Thank you 3:24 my gpu was not fitting I bent it a but now fits!

bro... my pc always restart automaticly when play game after i installing gpu ....whyyy

Graphics advice from Father Guido Sarducci... No offense, but you sound like him. Have a great day...

Can i get a clear view

Yeah this is not very helpful when you are vertically mounting a 4080 super. Do one that’s a little more challanging

My lines doesnt fit

Make sure it's aligned guys and girls!

My gpu is stuck in my mother board like one side is in and one side is out can you help me?

I think you forgot the most important step, just before you insert the gpu into the pcie slot. TAKE OFF THE COVER THAT PROTECTS THE GPU’s CONNECTION TO THE PCIE. Boneheads are going to bonehead every now and then, myself included.

Thx my 3060 12gb is broken