1 vs 3 Hole Steam Nozzle Comparison | Breville Barista Express

Подписаться 13 тыс.

Просмотров 11 тыс.

50% 1

1 hole steam nozzle vs 3 hole steam nozzle.
Steam wand tip comparison
3 hole SteamWand.
How to froth milk on 3 hole steam nozzle?
** I get a small commission being an Amazon Associate, if you use my link below.
You can buy ANYTHING from Amazon, but use any of the link below, search & buy.
--------------------------------
- USA Customers link on Amazon.com
--------------------------------
COFFEE BEANS:
Lavazza Super Crema: (Mild and Creamy) - amzn.to/3tQ2M0r
Lavazza E Gusto - amzn.to/33BYgIh
Lavazza Crema E Aroma - amzn.to/33KncNx
Lavazza Dek Decaffeinated - amzn.to/3Iv0Nm9
TOOLS:
Weighing Scale 0.01g Digital - amzn.to/3rPJKoq
MATOW 2 in 1 Distributor & Tamper 53mm - amzn.to/33BYEGJ
Bottomless Naked Portafilter - amzn.to/3qYmB3B
Espresso Glass dual wall - amzn.to/3AyzhkR
WDT Tool - amzn.to/3ueVovV
CLEAN/DESCALE MACHINE:
Dezcal Descaling Powder - amzn.to/3IF07dV
Durgol Descale Liquid - amzn.to/3IyJBw8
Clean Me Powder Cafiza - amzn.to/3FUjn5H
Grinder Cleaning Tablet Grindz - amzn.to/3FY5Xp9
BREVILLE:
Inner Burr Adjustable - amzn.to/3KIHTu4
Charcoal Filter BWF100 - amzn.to/3tWK1sf
----------------------------
- CANADA Customers link on Amazon.ca
-----------------------------
COFFEE BEANS:
Lavazza Crema E Aroma: amzn.to/3rhG7qJ
Lavazza Dek - Lavazza Decaffeinated Espresso Beans: amzn.to/33hCF7J
Lavazza Super Crema: (Mild and Creamy): amzn.to/3nnw8iw
TOOLS:
Weighing Scale 0.01g Digital - amzn.to/3fhVo5z
HENDR 2 in 1 Distributor & Tamper 53mm - amzn.to/3nTAwWQ
HENDR Bottomless Naked Portafilter - amzn.to/33QAnN5
Espresso Glass dual wall - amzn.to/3qYmghm
WDT Tool - amzn.to/3rR7sR6
CLEAN/DESCALE MACHINE:
Dezcal Descaling Powder - amzn.to/3GW659U
Durgol Descale Liquid - amzn.to/3nWDIkB
Clean Me Powder Cafiza - amzn.to/3KSXHdU
Grinder Cleaning Tablet Grindz - amzn.to/346KVYn
BREVILLE:
Inner Burr Adjustable - amzn.to/3fWORgN
Charcoal Filter BWF100 - amzn.to/3fZ6DzY
Where to buy thid 3 Hole Steam Nozzle?
www.aliexpress...

Опубликовано:

27 сен 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 32

@toddredlin5634 3 года назад

It’s great to have someone like yourself to do the roadwork on different equipment and help the home barista make decisions on upgrades

@AjusCafe 3 года назад

Thank you.

@OneIdeaTooMany 2 года назад

As a former barista, 3 and 4 hole steam wand tips are quite common but that's because we're sometimes steaming a lot of milk and let's be honest, everyone wants their coffee yesterday. After using my housemates BBE it does feel a lot slower but hey, I'm not in a rush so the single nozzle is good enough for me.

@AjusCafe 2 года назад

Thank you for the feedback. I'm sticking on to the 3 hole nozzle.

@Ro66y_C 3 года назад

Thanks for making this video. I think alot of BBE owners do not realized it's not easy to texture milk with 3-hole nozzle. As a BBE user myself who can confidently texture milk consistently with the stock nozzle, but 3-hole nozzle is almost like different ball game. Had a chance steaming with 3 holes nozzle on a Rocket machine, it was hard and I felt like a total noob learning to steam. Appreciate the effort you put out on your first try!

@AjusCafe 3 года назад

Rocket has a much quicker froth. But once you get it, its easy

@CDdogg303 9 месяцев назад

I have a three hole and a one hole for my steam wand. I have been using the three hole and have been able to froth milk but I'm starting to think my machine just may not have enough steam pressure for three holes so I am going to try the one hole and see how it goes.

@ishtiyaqmakda-coffeelover3942 3 года назад

You should have introduced more air with the three-hole tip. It is understandable as you are pretty new to this tip. I will be waiting to hear if it is worth investing in it. Keep it up.

@AjusCafe 3 года назад

Thank you. 3 holes can introduce big bubbles quickly, so i was being careful not to. I could try it only that day. I didn't even get time to make coffee last few days. Hoping to get time to froth on this 3 hole soon.

@arturocasillas3336 Год назад

Do you know if any 1 hole tips that are similar to the 3 hole? I don’t like the one from breville express.

@AjusCafe Год назад

You can look for it in amazon, aliexpress etc. Sometimes you will be lucky to find one

@amrithachhatwal 2 года назад

Hi Aju, Good morning, liked your video onDIY knock-box😄,; also this video- I know it is from Alibaba and it will take sometime to arrive, but Amazon has a 4 hole which would help in steaming it faster? Would it better or too much.

@AjusCafe 2 года назад

Thank you 😏 Its from aliexpress.com and it can take 2-4 weeks. You can get them at Amazon. 2 or 3 holes would be slightly better than 4 holes, as the machine won't have enough power to push enough steam. But i didn't read anyone complaining either.

@slow_clumsy 3 года назад

Your milk isn't one texture, there's a seperation of foam and milk due to insufficient amount of vortexing

@AjusCafe 3 года назад

I'd say its more to do with the 3rd hole which is close to the surface that introduce big bubbles often. It's more to do with the position to fix I guess. I'm still learning to froth on this 3 hole nozzle.

@slow_clumsy 3 года назад

@@AjusCafe I'm saying that your milk isn't one texture due to you not vortexing enough which you can tell by when you pour the latte art, notice how the milk rushes to the edges and breaks the surface. That's because the "liquid" is rushing to the bottom and destroying the surface then near the end all the foam comes out. I can add a lot of air into my milk but if I don't vortex to break those bubbles down and incorporate the air to make one emulsified liquid then it honestly doesn't matter what tip you use. You should be hearing that paper tearing sound which means you're introducing air within the first 10-20 second, once your milk gets too warm the milk will have a hard time incorporating the air you introduced. Start with you wand submerged in the milk and slowly lower your pitcher till you start hearing that light introduction of air, it should be a light but constant paper tearing sound and let that go for around 10 seconds or till the milk reaches you hands temperature. Then submerge the wand and just keep swirling the milk, try to more your pitcher as little as possible other than up and down. After it gets too hot to touch give it another 3-4 secs then you are good.

@slow_clumsy 3 года назад

Now that I'm looking back on it, your milk also looks too thin. I don't think you're adding enough air ironically

@AjusCafe 3 года назад

@@slow_clumsy Agree to your points. I've explained those in my old video here ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-xoy-8IAEu54.html Here my point was 3 hole steam nozzle acts very different to 1 hole nozzle. That's were it lacks to get the correct consistency in this video.

@slow_clumsy 3 года назад

@@AjusCafe keep trying my friend! I'm sure it works just as good as the stock tip just curious to see what the differences are!

@DavidDLee Год назад

Looks like the heating time is about the same, though not clear why you even bothered with the 2 ounce water heating test. The milk frothing test seems inconclusive; if it does not warm faster, do you get better frothing quality or not? My guess is that you'd need much stronger steam production to successfully use a 3 hole tip and that a 3 hole tip on this machine produces a weaker steam velocity and thus worse frothing quality. Of course, I am not sure, only a guess.

@AjusCafe Год назад

Heating time is slightly faster in 3 hole nozzle. Initially it was hard to froth, but after getting used to it, i don't want to go back to single hole. Froth quality is more of less same and depends on the person. But just for that slight faster frothing capability, I'd stick on to the 3 hole.

@DaddyMakesCoffee 10 месяцев назад

Nice video mate! However you shared lots of stuffs not the wand tip shopping link.

@AjusCafe 10 месяцев назад

The link is there in the Description

@DaddyMakesCoffee 10 месяцев назад

@@AjusCafe dead link mate. Lol

@Gilda1054 3 года назад

I observed that your frothing made a load noise. I purchased the Breville Barista Express in June 2021 & it was quiet when frothing! I’ve since cleaned & descaled my machine three times. After the first time it became louder as was yours in this video! I clean the frothier & nozzle after use & remove the nozzle once weekly cleaning it but still have noise? Please advise what could be the problem!

@AjusCafe 3 года назад

That loud noise at the beginning is normal. But it can be avoided if you lift up the steam wand a bit towards the surface of the milk and introduce bubbles at the beginning. Then you can dip a bit more and you won't hear that long noise. Its nothing to do with the steam wand or dirt build up in it.

@andrewberry6546 3 года назад

Can you add link where you got 3hole tip thanks

@AjusCafe 3 года назад

I'll update the description as well. Here is the link www.aliexpress.com/item/4001298100346.html?spm=a2g0s.9042311.0.0.6a2c4c4dCXNMxe

@alanh8101 3 года назад

Is it worth it?? Or better of with original. Take care Alan H

@AjusCafe 3 года назад

Too early to say as I'm new to this. But 3 hole can froth milk quicker than the Breville's, which i like.

@TheloniusIcy 3 года назад

Different number of hole designed for different purpose, like if most of user on your home not trained, u can use 1 hole tip, because different number of hole need different jug handling.

@TheloniusIcy 3 года назад

Try to hold the jug until the milk doesn't scream in pain when you froth, you will get much better result