10 Bambu Lab Maintenance Steps You MUST Do!

Подписаться 121 тыс.

Просмотров 279 тыс.

50% 1

Here are 10 Bambu Lab Maintenance Steps you Must do to keep your Bambu Lab 3D Printer working great!
bambu-lab-ams-hub-ptfe-button by SamH: www.printables...
Super Lube Synthetic PTFE Lube: amzn.to/3HxAoW5
Super Lube Synthetic PTFE Lube Thicker: amzn.to/3DE1j1q
Canned Air: amzn.to/3wVud9l
99% Isopropyl Alcohol: amzn.to/3HVBtaz
Spay bottle for Isopropyl Alcohol: amzn.to/3lbOi8T
Blue Shop Towels: amzn.to/3wVgCPd
Loose Rechargeable Desiccant: amzn.to/3HxUZJL
Rechargeable Desiccant Packs: amzn.to/3lbvVRq
Join this channel to get access to perks:
/ @theedgeoftech
🛑 Subscribe for more: www.RU-vid.co...
🎥 Video Editing done by Caleb Fairres: www.calebfairre...
Save money by using my discount code TEOT5 on the TH3D Website: www.th3dstudio...
3D PRINTERS, TOOLS & MATERIALS (affiliate)
TH3D: www.th3dstudio....
FDM 3D Printers: www.amazon.com...
Resin 3D Printers: www.amazon.com...
Laser Stuff: www.amazon.com...
3D Printing Filament: www.amazon.com...
3D Printing Tools: www.amazon.com...
3D Printers and Parts from Creality Direct: www.creality3d...?sca_ref=14184.gw5rXaIv7L
🛒 My favorite tools/materials on our Amazon page: www.amazon.com...
Want more Edge of Tech videos? We go live every Monday Night on Hotmakes!
📺 HotMakes live streams: / @hotmakeslive
SOCIAL/SUPPORT LINKS
💵 Patreon: / theedgeoftech
💲 PayPal: paypal.me/thee...
📸 Instagram: / theedgeoftech
📣 Twitter: @theedgeofteck
💬 Discord: / discord
👽 Facebook: TheEdgeofTechOfficial
🎥 FILMING GEAR (affiliate)
www.amazon.com...
Music by Wicked Realm
Album - No More Fairy Tales
Song - Feed
/ @wickedrealm5507
Disclaimer: Some of these links go to one of my websites and some are affiliate links where I'll earn a small commission if you make a purchase at no additional cost to you. As an Amazon Associate I earn from qualifying purchases.

Наука

Опубликовано:

1 окт 2024

Ссылка:

Скачать:

Готовим ссылку...

Добавить в:

Мой плейлист

Посмотреть позже

Комментарии : 345

@link6032 Год назад

Definitely DO NOT spray IPA or any other cleaning agent onto the rods, spray onto a cloth and then wipe. Spraying in the enclosure results in covering the belts (rubber and alcohol don't mix, will dry out and crack), covering the linear Y rods and removing all the grease from inside which you can't repack, spraying onto the rods is terrible advice unfortunately. Follow Bambu's maintenance guides to prevent damaging your machine. Also probably best not to use oil on the lead screws, oil can run down the screw and into the stepper motor below (very bad), again there is a reason why Bambu specify grease and not oil 😵‍💫

@MarinusMakesStuff Год назад

Yeah, there's a lot of bad advice in this video. Clearly not made by someone who knows how it's supposed to be done. Also... using compressed air to clean a machine? Really not done. This will only blow dirt into the small crevices, making the risk of jams bigger.

@bilbobagend8155 Год назад

To be fair, the official rod cleaning video published by Bambu Lab's youtube channel had them spraying alcohol on the rods. Not that I'd ever think or want to pour isopropyl into a spray bottle.

@joeyhouben3270 Год назад

A paper towel? why not a micro fibre cloth..? also why lubricate only one off the rods and not all? I got more questions then answers....

@trigga31 Год назад

@@joeyhouben3270I think he was just using the one screw for an example. I’m with u on using the microfiber towel

@TonyShuai 11 месяцев назад

Please do not pretend to know everything but know nothing, the oil will destroy the motor? That is the biggest joke I have ever heard. 😂😂😂😂

@jraiello Год назад

A few suggestions, do the cleaning of fans and extruder before other maintenance. This will avoid getting crap on your newely cleaned and lubricated z rods, camera, fiber rods, etc. just makes sense, rough messy stuff always first. Appreciate your video, just reorient the sequence of steps.

@kerplunk38880 4 месяца назад

Newbie mistake. Never use paper towels to clean the lead screws. Paper towels shed and this is horrible for the performance of the printer. Use a lint free microfiber.

@allansteffensen5646 Год назад

Good video..but quit using regular paper towel!! That is leaving fibres behind. Use Blue shop towels or a microfiber cloth instead. Otherwise you are just adding to the problem of leaving bits behind on your rods and lead screws

@TheEdgeofTech Год назад

Great advice! I used it because that is what most people have laying around. But if you look at the description, I linked the blue shop shop towels! :)

@MistrWeh Год назад

Careful with these microfibre stuff, might scratch glass or the coatings on the glass. Consider buying some optical wipes for this purpose

@kyleirelandtech Год назад

CHAPTERS 0:00 Intro - 10 Maintenance Tips 0:14 Note - Bambu Lab Printer Compatibility 0:35 Removing AMS 0:51 Removing Top Glass 0:57 Cleaning Rods / Belt Tension / Error 1:09 Turn it OFF! 1:18 2mm Wrench - Loosen Four Screws 1:30 Isopropyl The Rods / Moving Head 1:41 Wipe until Dry / Paper is clear 1:59 Moving Gantry - Front to Back 2:08 2mm Wrench - Tighten Four Screws 2:19 Turn it ON! - Self Test Button 2:31 Very Important Steps Completed 2:40 Cleaning / Lubricating Z Lead Screws 2:55 Keep it ON! 3:03 Move Bed to Bottom of Printer 3:13 Lead Screws Cleaning / Isopropyl Thin Coat 3:39 Applying Synthetic PTFE Oil 3:46 Small Drops goes a long way! 3:53 Homing to spread Oil 4:03 Applying Oil to lower Lead Screw 4:15 Cleaned and Lubrication Completed 4:21 Recommended Lubricants 4:31 Quick Message - Thank You! 5:03 Extruder Cleanup 5:12 Lift Off Front Cover / Compressed Air 5:23 Optionally Remove Extruder and Clean 5:41 Cleaning the Fans - Important! 5:56 Compressed Air - While OFF! 6:16 X1 Carbon - Cleaning Lidar Lense 6:40 Cue Tip and Isopropyl - Lidar Lense 6:48 Gently Cleaning Lidar Lense 6:53 Lidar Lense Cleaned! 7:03 Cleaning Camera - Cue Tip 7:19 Gently Cleaning Camera 7:34 Camera Cleaning Notes 7:42 Checking Filament Cutter 7:50 Filament Cutter Replacement Frequency 8:18 Remove Hot End Cover 8:20 1.5mm Hex or Allen Wrench - Cutter Arm 8:58 Nozzle Wiper 9:20 2mm Wrench - Change Nozzle Wiper 9:48 Note on supplied Cutters and Wipers 9:58 X1 Carbon - Check Carbon Air Filter 10:14 Changing Carbon Air Filter 10:47 Changing Desiccant 11:23 Optionally Cleaning Dust AMS 11:34 Closing it up! 11:43 Maintenance Completed!

@radish6691 Год назад

Thanks! He’s at the edge of tech, hasn’t quite made it to “tech” 😂

@legocircus Год назад

Thank you so much, @kyleirelandtech!

@Martial-Mat 10 месяцев назад

Nice one, cheers.

@dockerbeat 4 месяца назад

1:37 1.Использовать нужно ткань, а не бумагу, от бумаги пыль. 2. Использовать перчатки латекс или другие медицинские одноразовые, чтобы жир не оставлять, на деталях и филаменте.

@Pyriscent 11 месяцев назад

Do not use oil on your lead screws, this can destroy the motor as well as the entire screw. You need to use grease as specified. Also never spray isopropyl alcohol inside your container, you will dry it out and crack the belts. What the hell is this video?

@dc345601 2 месяца назад

The Bambu Labs video shows spraying liberally all over the rods too.

@paulsturgill8848 18 часов назад

I was wondering why we got the grease packets. 😂

@alecubudulecu 8 месяцев назад

Do NOT use isopropyl alcohol on the camera or LIDAR! IPA removes coatings off lenses …. Like the anti glare coating on most cameras - including the Bambu cameras. This is also why you don’t use IPA on eyeglasses. (Source : I’m an optician)

@jeepthangjim Месяц назад

IPA is recommended by the manufacturer.

@alecubudulecu Месяц назад

@@jeepthangjim manufacturer is a 3d printing business. Not a lens manufacturer. IPA not recommended comes from lens manufacturers.

@jeepthangjim Месяц назад

@alecubudulecu Doesn't matter. The manufacturer of the machine provided recommendations on how to care for the machine. If you want your warranty to be honored, you follow the manufacturer's recommendations.

@alecubudulecu Месяц назад

@@jeepthangjim lol. you think Bambu will know the difference between IPA or soap and water on the lens?

@jeepthangjim Месяц назад

@@alecubudulecu So you're saying there's no difference between IPA and soap and water?

@NovaFN.. 10 месяцев назад

Definitely don’t spray the fans with compressed air because those fans turn into a generator and I might short circuit your $1500 printer

@Queracus Месяц назад

1) Wait wait wait. you purposely got out all the grease from the Y axis bearings by whiping the rods and than moving it untill bearings are completely dry???!!! hahahaha what a dumb thing to do. Runing bearings dry on carbon is just calling for fast Bambu lab store for replacement. As a mechanical engineer, i cannot advise NOT TO DO THAT enough. 2) Never spray Isopropanol like that, it will stiffen the belts if it gets on them, and they will crumble like a cookie. Another Bambu store trip 3) Use grease not oil. Oil tends to solidify leaving you with crap. Especialy if you use the wrong one. Use grease instead (make usre it can handle the temps and its good if its rated for rails and screws) Youtub would need a missinformation popup like twitter. RU-vid is more and more filled with bad advice

@azw409 5 месяцев назад

After spraying the bars with IPA, I'm left with a sticky mess. Should i have used a 4% session IPA or a 6.5% double hopped IPA ?

@BoatPatrol 2 дня назад

Why are you yapping so much? Just show us the steps.. omg

@greghumphreys1619 Год назад

You've produced several videos on the Bambu Lab printer that have been useful to me, and I just wanted to say thanks.

@TheEdgeofTech Год назад

Thank you so much! I really appreciate it! I'm glad the videos help!

@DoRC Год назад

Is spraying a solvent on the rails and then running the linear bearings on them over that cleaner really a good idea? I feel like that's a great way to take whatever's on the rails and put it in the bearings.

@jasonconstant455 6 месяцев назад

I watch this video every time I maintain my X1C thank you so much for the great videos. I would appreciate it if you added sections to your videos especially this one, so we can quickly navigate to the different steps! I love your simple and easy presentation style and your obvious vast knowledge of 3d printing.

@andyvannort2743 Год назад

Shop towels over paper towels to avoid residue. Also spray the towel not the Rods. Spraying hits the belts with ipa which isn't good for them.

@Nastynik91 6 месяцев назад

Serious jack black vibes. I love it

@Engineerboy100 Год назад

Good job on the video. I will not be using paper towels though, I will be using microfiber towels. Thank you for posting this video. I just got my first printer 3 days ago and I'm trying to learn all I can. I got the X1 Carbon and so far I absolutely love it.

@baschz 3 месяца назад

Do they sell that transparent extruder? Because mine is black. Looks pretty handy to see if there's any filament debris in there, so you're not taking it off and apart for nothing when troubleshooting.

@daspicsman 2 месяца назад

Do the fans first. Otherwise you’re blowing dust and gunk right back onto your oiled parts.

@michaelm4946 Год назад

After a month of printing on my XC1 Carbon, I was looking into doing PM on it. This video is spot on for what I was looking for. I appreciate you being awesome.

@TheEdgeofTech Год назад

Great to hear Michael! I'm glad it helps!!

@Kungpaoshizzi Год назад

Always hold the fan before you blow so it doesn't spin

@davegeiger1964 Год назад

Hey Jim I also live in the Milwaukee area and have a X1-C. Would you ever consider doing some in person training? This is my first printer and I have a learned a lot with it but I feel like there’s a lot a could do to make my prints even better. It would be awesome to get some pointers and tips from someone who has experience.

@TheEdgeofTech Год назад

👋 Hey Dave! Shoot me an email and we can chat! Go Bucks!

@tjans1979 Год назад

@@TheEdgeofTech you're in Milwaukee? Me too!

@UncleJessy Год назад

Ohhhh man I needed this video

@TheEdgeofTech Год назад

Right! I keep seeing it pop up in the groups, so I thought I would make a quick video. Thanks for watching!!

@altf4thc Год назад

Just started my first big print on my x1c and it prints for about 10 seconds and stops for about 10 seconds before continuing over and over....can someone tell me what is wrong?

@TheEdgeofTech Год назад

Hmm. Is it still doing this?

@altf4thc Год назад

@@TheEdgeofTech no. I'm not sure what happened. I tried several stls and it was doing it for several prints and then stopped

@harrymorris613 Год назад

Thank you for the video! What are the 4 bolts that you loosen at the beginning of the video, and what purpose does it serve to loosen and the retighten them? thanks!

@ktakeshi17 3 месяца назад

Belt tension readjustment.

@reprinted3D Год назад

You left out one thing, especially if printing with ABS: Use some glass cleaner on the inside of the door and the underside of the glass top. The gasses from ABS will attract dust and grime and fog them up if not cleaned -- just like what you get on the inside of your car's windshield.

@TheEdgeofTech Год назад

Good point!! I was going off their guide, so they probably should add that too! I appreciate the feedback!

@Cheddarsharp Год назад

I just got mine in yesterday and waiting to set up this weekend. Saving this bad boy for monthy maintenance. Thank you so much for providing this for use newer to 3d printing people! Also all these x1 videos makes this the easiest subcribe of my life

@alecubudulecu 5 месяцев назад

Note on “loosening the back screws”. Be aware this ruins your XY axis precision. The idlers buckle when loose and you’ll find the cable pulley is no longer centered. This will cause banding.

@skyrider4789 Год назад

Thanks for this video! I haven't owned my X1C as long as you and others have so it's nice to get the 411 & tips. Much appreciated! 👍 I've been subscribed for a while, originally for my E5+, but now with the Bambu, I'll add you to my best of list on my site! 🙂👍

@TheEdgeofTech Год назад

I'm glad it helped! Thank you for watching!!!

@UncleJessy Год назад

The filament wiper is the bane of my printer 😂🤣 there are 3D printable replacements on printables

@TheEdgeofTech Год назад

HAHA I wonder what causes it's issues? This was the first time I swapped mine since getting this machine in MAY! lol

@canadianoperator 6 месяцев назад

I could be wrong but I think when you were cleaning the micro LIDAR you may actually have been cleaning the camera lens. Yes , I said that right :) Not the chamber camera. The X1C has a camera on the bottom of the print head, as well as the micro LiDAR on the side. Again someone please correct me if that’s wrong but I’m pretty sure it’s not. :)

@Jok3rsFaVor 3 месяца назад

Dang I went looking for Lubricating tips for my new P1S.. Immediately knew this tutorial needs revision... No printer uses Oil on those rods, NEEDS Grease.. Very important.. I figured spraying alcohol wasn't the way to go, not to mention using non-woven paper towels vs normal ones.. Thankfully the comment sections really can help correct things..

@Gert-DK Год назад

You forgot the most important thing, in my opinion. Check the tubes, all the tubes. They do wear down and guess where all the debris and dust ends. X1 is known for clogging and I am pretty sure PTFE dust and debris is a bad thing. There are examples, that the filament has completely worn through the tube. Bambu recommend check after each 10 kg or 5 kg if you use abrasive filament. If you suddenly get under extrusion, check your tubes and replace if necessary. Bambu Wiki has a good guide howto. TIP: Using compressed air is always, the first thing you do during maintenance. Just cleaned and oiled, no reason to blow dust to the oily things.

@PeterAgostiniJdcap26 2 месяца назад

Great tips Jim I just got my x1 carbon how many months do you wait to change the parts Wiper Cutter Carbon filter ? Also how do clean behind the rear lead screw if poop gets in there ? Ty

@HydrationAppreciator 29 дней назад

I am interested in your extruder component with the clear (PC?) plastic, mine is 100% opaque. Was the translucent version an older model or an aftermarket part? I recently clogged a .4 CHT nozzle because I had it doing very rapid repeated retractions on the first few layers of the Open Ball vise when I printed the ball upside-down; I think the translucent extruder body could have helped me see what was going on to diagnose the issue

@justincider8892 9 месяцев назад

It's best practice to hold fans still with one hand and use compressed air with the other. This will reduce wear on the bearings and prevent a dynamo effect from putting electricity back through the system.

@daleburrows2623 29 дней назад

I have a Bambu P1S printer. In trying to disconnect the AMS, the white cable will not pull out. A coupler is not included. How do I disconnect this cable to get me AMS off? Thanks

@NPCVenture Год назад

Probably better to wipe the IPA on the rods. Getting IPA on the belts will degrade the rubber over time and cause them to fail earlier than normal.

@andyspoo2 25 дней назад

Their are prints that you can make that will help you get the gunk out of the lead screw because when you use a paper towel you are mostly cleaning the outside when you really need to be cleaning the inside of the threads.

@EliteMacFreak 14 дней назад

Hey, where'd you get that clear extruder cover? Did they change the design? Mine is black--I can't see filament jams.

@andyspoo2 25 дней назад

Using oil they use for Singer sewing machines works well. It's super light (as in not gloopy).

@TheBlackDove 8 месяцев назад

Fans should not be allowed to be spinning when air cleaned. Electrical Back Voltage: In some fans, particularly in computers, spinning the blades can generate electricity (back EMF). This unintended voltage can potentially damage the fan’s motor or the electronic components it’s connected to.

@Z0rr0ku 2 дня назад

What can I do if my P1S is kind of crashing when its printing on the corners? One time the hotend front end plastic fell off from the impact while printing on one corner 😢

@echo-hotel Год назад

Are you sure ipa is safe on the lens? It’s common to have coatings on them, which will turn foggy and ruin the lens.

@TheBlackDove 8 месяцев назад

You’re right. But those who don’t know, teach.. 😂

@AdrianAmbroszkiewicz 9 месяцев назад

Hello. I have 1 question about Bambu Studios - maybe you will be able to help me. I was trying to add a simple, plain circle to Bambu Studios to print a coin but in bugger size (10cm diameter). And when I upload the .svg file to Slicer I can see that the edge of the coin is not fully rounded - you can see the small walls that make up the circle. I tried uploading few different circle .svg files that are 100% circles and in Bambiu Slicer the walls & small edges appear. The question is: Is this normal that the Slicer shows these walls and not fully plain edge of the circle - but it will print it as a plain circle? Or should I do some editing within the slicer to make it disappear? Sorry to ask, my printer will come in a month from now and Im already trying to get some first models done and learn some about Bambu Slicer. Thank you in advance and Happy New Year! :)

@TheEdgeofTech 9 месяцев назад

To be honest, I've never added a SVG to the slicer and try to print it. Also I'm terrible at modeling lol If you don't use a modeling software already, you could try tinkercad. This might help with your designs. ru-vid.com/video/%D0%B2%D0%B8%D0%B4%D0%B5%D0%BE-bVQBZArIt34.htmlsi=f7JGvCspMebdLJO6

@TheJennyFTB 11 месяцев назад

This video was helpful, but light on the “why”. This isn’t my first printer, not even my first CNC machine and I still have no idea what those bolts on the rear loosened. A little more background in future videos would really help

@ZaniZandiani 8 месяцев назад

If I just knew!!! :( Most people want something that they can print right away like my cheap Printer that I had for 2 years until it suddently died on me......

@boboscurse4130 7 месяцев назад

Bambu says if you use IPA on the carbon rods you need to follow it up with grease. And what about checking belt tension? My prints have been horrible lately. People say my belts could be loose but I have no clue what to do.

@Martial-Mat 10 месяцев назад

This video is considerably less useful without chapters. at least copy them from Kyle below.

@BigJessGaming 6 месяцев назад

I would think you should clean and lube the screws last.. not first then blow dust off everything else.

@HanzGruber1982 7 месяцев назад

Zero torque specs? Are you really expecting everyone's definition of "tight" to what you think it is? You're going to have people go full ape to get it "tight" and destroy their printer.

@roidboyy9392 2 месяца назад

I lubed the idle pulleys, but it still makes a scratching type of noise when it is prepping to print and when I do the maintenance. I cannot find where it is coming from.

@LordNerfherder 5 дней назад

A lot of malpractices. Go to bambu and follow their instructionsninstead. Spraying the air into the fans causes swift rotation and this makes the fan into a generator of electricity which can hurt the printer. Lightly hold the fan while blowing them clear and dont tilt the bottle - more ice sprays out if you do. After - let condensation evaporate for a while before starting the machine. Else you have just short circuited the circuits hit by condensated water. Do not blindly spray ipa into the machine while cleaning the rods. And dont move the gantrybefore wiping the rods. You just push around the much that you loosened up with the ipa. The ams has so long wires that you can just spin the printer 90 degrees and place ams next to the printer. Honestly just following bambus best practices is recommended so just linking them is wiser than just speedrunning. For example the belt tension is definately a go to bambu thing. This isnt really all the details omitted or wrong, so for reference of standars maintenance - always check bambu instructions first. Not some dude on the internet spraying some ipa all over the printer and saying its now fine.

@TheEdgeofTech 5 дней назад

@@LordNerfherder appreciate the opinion! When I did this video, I followed their instructions step by step. That's why it's out of order as well. But I followed their instructions as intended, including spraying the IPA. So while I agree with you that you should always check to manufacturer's instructions, in this case, I actually did. Thank you for watching

@IndianaGraphics Год назад

🥴 I would start with the areas that need compressed air. That will blow dirt onto the areas you already cleaned. JS

@Shazam0527 9 месяцев назад

Wth?! NO NO NO!! Do not move the head back and forth as doing so will have the stepper motor create power! DO NOT follow these steps!

@syranth8912 Год назад

The fans will last even longer if you can keep them from moving while blowing so that you don't send charge into the system.

@MrChucklepuff 6 месяцев назад

Man how often will I have to change the timing belts because I just watched a 10 minute video on it and it looks complicated!

@arnoldbailey7550 6 месяцев назад

DO NOT use anything but a lens cloth on the lidar lens. Micro scratches will degrade the lidar's accuracy.

@go4peace467 Год назад

sorry Jim but first you clean the rods and then you blow the gunk of the hotend and the fans tru the machine?¿? lets just say i would do that first and then clean the rest. love your video's keep em comming!!!!

@TheEdgeofTech Год назад

No need to be sorry! You can do it in any order you would like. I just filmed them in this order. lol

@subseauk Год назад

Good video Jim. Wouldn't it be better to do the blow cleaning first before the rods etc???

@TheEdgeofTech Год назад

You could for sure! If your fans are really dirty, the go that route! haha

@KevinRedmondWA 11 месяцев назад

Oh god don’t use paper towel, especially on the lens. Christ. Micro fiber, ever heard of it?

@diazo5679 Год назад

Seems rather counterintuitive to first clean the rods and put oil on them and the start blowing compressed air everywhere. Does that not blow dust everywhere to include the oil on the rods you just oiled?

@TheEdgeofTech Год назад

Ya, blowing it off first is a better idea.

@Nastynik91 6 месяцев назад

Im actually waiting for a p1s combo to come in, got tired of all the headache i got from the anycubic kobra 2

@the4thj Год назад

~Campfire chat. You could get some cheap microfiber rags and not paper towels just a thought.

@riedling7955 9 месяцев назад

well done, been looking for something like this!

@TheEdgeofTech 9 месяцев назад

Awesome! Thanks for watching!

@wetterschneider Месяц назад

New owner and I do want to take care of the printer - but you already lost me 1 minute in. You are detaching the AMS, but you don't have filament in the tube. What's the real first step please? How to clear the filament out before disconnecting the AMS?

@naktaal 2 дня назад

On the touchscreen go to the filament screen and select unload. That will retract the filament back into the AMS.

@zachariahm.kemper7406 Год назад

Time stamps would have definitely been appreciated

@mirkob2925 Месяц назад

Great video! That is what I needed. Where you get the transparent extruder? Thanks.

@TheBlackDove 8 месяцев назад

easy with the IPA. Should not be used everywhere. it damages some components.

@ordinarypeople801 10 месяцев назад

Why is needed to repeat "It's that easy!" after every sentence?!?!?! 🤷🏻‍♂🤷🏻‍♂

@bigcheesetxmedia 9 месяцев назад

dont spray compressed air onto the fans without holding the fan so it wont spin. it if does spin from the compressed air it can cause a short by generating a current

@ericc8895 Год назад

I should have ordered the one with the AMS, I ordered the X1C last week and it will not ship until the end of March, ugh!

@TheEdgeofTech Год назад

Don't worry, it will come before you know it! You could always cancel that order and order the one with the AMS! :)

@gsdtdeaux7 9 месяцев назад

Did i miss something or did he not say what the 2 screws in the back actually did? Im assuming they are the tensioners

@Schnapsbrennor 8 месяцев назад

Look for the end gcode that unloads the filament and comment it out with a ; Then your cutter is not used every print

@Swerewolf Год назад

Couple things: Your link to the alcohol takes you to a 91% - not 99%. And where do you find the self check on a P1P? I've looked and don't see it, unless I'm just missing it. :( Otherwise, thank you for this awesome video! I was just thinking about maintenance for my P1P. Still very new to the hobby and I want to take care of this thing like it's gold! :)

@TheEdgeofTech Год назад

I will double check what it's called on the P1P and get back to you! Also, I have fixed the link!

@nAcolz Год назад

On the Bambu Handy app, on the first screen you go to the three stripe menu in the upper right corner, then Machine Assistant, and then the Magnifying glass with heartbeat kind of icon in the upper right corner. On the printer it's in the third menu (so the settings), on 2nd page under calibration. In BambuSlicer it's on the device tab, top right option for Calibration.

@Swerewolf Год назад

@@nAcolz Thank you!

@micdraypr1855 2 месяца назад

pro tip: use coffee filters instead of paper towels, they are much more durable.

@IndianaDiy 4 месяца назад

I found on the Bambu lab wiki they mentioned some brand of grease instead oil or Super Lube 92003 Silicone Lubricating Grease with PTFE as an alternative but no oil for the vertical screws.

@phila8226 Месяц назад

Same question: Bambu recommends a grease and the video says oil. There is a difference!

@IndianaDiy 29 дней назад

@@phila8226 grease works better in my opinion. Read Bambu maintenance page. I use super lube silicone lubricating grease for z rods and multi use synthetic oil for top metal rods and oil rollers for belts carefully.

@naktaal 2 дня назад

What brand of grease did they mention?

@jc7241 11 месяцев назад

No actual helpful info here! All you have to do is leave RU-vid and the world will be better. It’s as simple as that, and you’re done! 😂

@TheEdgeofTech 11 месяцев назад

Interesting.. Why do you say there is no helpful info here when I followed their guide step for step. Lol Also, you say to leave RU-vid for info and the world will be better, but yet you're here... Watching this Video... And leaving Now Helpful Comments.. 😂

@samsonite7065 7 месяцев назад

So no mention of cleaning the silicone cover near the nozzle? Seems to be a pretty big thing to pass over

@mikedixonphoto Год назад

FYI: Your description says "99% Isopropyl Alcohol" but the link to the product is 91% Isopropyl Alcohol.

@TheEdgeofTech Год назад

Oops! I'll fix that ASAP!

@TripodsGarage Год назад

I like earning extra credit 😃

@TheEdgeofTech Год назад

I bet you do!

@nAcolz Год назад

Could I leave the printer on, wipe the rods with IPA, and move the print head side to side with the menu on the printer?

@TheEdgeofTech Год назад

I guess you could, but if you spray the IPA, and hit the electronics, you may have issues. Since you are working on the belt tension as well, the printer won't move good if you loosen the tensioners first. That's why they say to move them by hand.

@guillaumemolter Год назад

This video got you a like and subscribe. With this machine being the “first 3D printer” for many users, I was surprised no one had done this already.

@woodwaker1 Год назад

Good video and tips.. How much extra credit do I need to get an only desks shirt?

@TheEdgeofTech Год назад

HAHA We could make that happen!

@DJ-Leo-3D 11 месяцев назад

You have inspired me to start 3D Printing and I thank you. You make feel comfortable about 3D printing. All your information really helps me a lot I can’t thank you enough.

@TheEdgeofTech 11 месяцев назад

I appreciate that, and congrats on 3D printing!

@KAKAFU Год назад

Don't have one or plan to get one not in my budget 😢😢But I think it can apply to all Printer cleaning wise .. lol

@TheEdgeofTech Год назад

I agree. Good maintenance should be done with any printer!

@atnfn Год назад

I see the fiament cutter arm has broken on that printer too (it's not supposed to be black so he has replaced it), seems to be a problem with the printer. If he hasn't made a video of how to replace that thing, it could be a good idea. Mine hasn't broken, luckily. But I don't often print multicolored prints, I only got the AMS for convenience.

@TheEdgeofTech Год назад

Actually that's not the case. It's never broken. This printer was my first one last May. It was from the first batch they did before the main production run. So some of the parts are a different color, like the clear extruder. :)

@cindywhite9754 11 месяцев назад

Put a very thin layer of IPA? I am watching this video to learn how to do maintenance on my Bambu Carbon x1- How am I suppose to know what IPA is?

@naktaal 2 дня назад

It stands for isopropyl alcohol. Don't use it on any of the camera/LIDAR lenses, though. It can remove their protective coatings.

@Jukkz 3 месяца назад

Spray the paper towel with isopropenol do not spray directly in the printer. you get some on the belts overtime it will weaken them and cracks can form

@phila8226 Месяц назад

Yes, Yes, Yes - good advice and spot on

@ParkerEversman 5 месяцев назад

how do you take display screen back off without breaking it

@robmarley7129 Год назад

Quick question tho, are all of these steps approved by them or will they void warranties? Seems breathing on these will do that.

@TheEdgeofTech Год назад

This came straight out of their maintenance guy! I followed it step by step 🙂

@robmarley7129 Год назад

@@TheEdgeofTech Nice. That's good to know

@davydatwood3158 Год назад

The lighting makes it look like you've greenscreened in the printer. :D A real question: am I right in assuming that the cutter is used once per print job if the whole job is from a single spool? So that a non-AMS user basically has 3,000-ish prints (and new spools) before the cutter is likely to be wearing?

@TheEdgeofTech Год назад

Lol thanks! And yes absolutely!

@davydatwood3158 Год назад

@@TheEdgeofTech Cool. I figured as much, but an outside sanity check is always wise.

@LanceAndCarina 10 месяцев назад

Soooooo what if you do remove the tensioner screws? Asking for a friend.

@fixumdude Год назад

Great video! We've had our kickstarter unit since last Sept and I was actually thinking just last week, "I bet I should be doing some kind of maintenance on this thing, I wonder what kind of stuff I should do?" So perfect timing. P.S. Love your magnets and stickers! (especially the blue one in the bottom 😉)

@TheEdgeofTech Год назад

Haha 😅😆 I thought you would like that! I conveniently put them there to see if you would notice for the video!

@yonallb 2 месяца назад

Is it carbon fiber dust coming off the rods? That shit is bad.

@thedeveloloper Месяц назад

This is a video of how NOT to maintain your printer....

@juansoriano84 Год назад

thank you man, amazingly useful!!! keep going with the bambu lab struff!! MEGA CLEAR all the explanation

@TheEdgeofTech Год назад

Thanks for watching!

@dcsflightdeck 6 месяцев назад

My desiccant packs were leaking with moisture!

@monkeywrench1951 Год назад

This is still the best maintenance video I’ve seen. If you have any additional maintenance tips, please let us know. And Thank You very much.

@wolfe1970 6 месяцев назад

Ermm no its not, there alot of donts in this video.... IPA on carbon rods ? Spraying where it hit rubber belts that will dry out and crack ? Compressed air blowing crap all over your components ? Oil that could dribbling down into the motors ?